From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932574AbbBBFaF (ORCPT ); Mon, 2 Feb 2015 00:30:05 -0500 Received: from mail-bl2on0139.outbound.protection.outlook.com ([65.55.169.139]:47849 "EHLO na01-bl2-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S932512AbbBBFaB (ORCPT ); Mon, 2 Feb 2015 00:30:01 -0500 Date: Mon, 2 Feb 2015 13:34:40 +0800 From: Liu Ying To: CC: , , , , , , , , , , Subject: Re: [PATCH RFC v8 00/21] Add support for i.MX MIPI DSI DRM driver Message-ID: <20150202053438.GA21302@victor> References: <1420014219-915-1-git-send-email-Ying.Liu@freescale.com> <20150202021743.GA32567@victor> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Disposition: inline In-Reply-To: <20150202021743.GA32567@victor> User-Agent: Mutt/1.5.23 (2014-03-12) X-EOPAttributedMessage: 0 Authentication-Results: spf=fail (sender IP is 192.88.158.2) smtp.mailfrom=Ying.Liu@freescale.com; gmail.com; dkim=none (message not signed) header.d=none; X-Forefront-Antispam-Report: CIP:192.88.158.2;CTRY:US;IPV:NLI;EFV:NLI;SFV:NSPM;SFS:(10019020)(6009001)(339900001)(51704005)(24454002)(243025005)(86362001)(87936001)(33656002)(110136001)(46406003)(106466001)(46102003)(57986006)(47776003)(33716001)(2351001)(105606002)(23726002)(77096005)(50466002)(97756001)(62966003)(77156002)(6806004)(85426001)(19580405001)(19580395003)(15975445007)(92566002)(83506001)(104016003)(76176999)(1720100001)(50986999)(54356999)(2950100001)(217873001);DIR:OUT;SFP:1102;SCL:1;SRVR:BY2PR03MB332;H:az84smr01.freescale.net;FPR:;SPF:Fail;MLV:sfv;LANG:en; X-Microsoft-Antispam: UriScan:; X-Microsoft-Antispam: BCL:0;PCL:0;RULEID:;SRVR:BY2PR03MB332; X-Exchange-Antispam-Report-Test: UriScan:; X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:(601004);SRVR:BY2PR03MB332; X-Forefront-PRVS: 0475418F50 X-Exchange-Antispam-Report-CFA-Test: BCL:0;PCL:0;RULEID:;SRVR:BY2PR03MB332; X-OriginatorOrg: freescale.com X-MS-Exchange-CrossTenant-OriginalArrivalTime: 02 Feb 2015 05:29:55.8714 (UTC) X-MS-Exchange-CrossTenant-Id: 710a03f5-10f6-4d38-9ff4-a80b81da590d X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=710a03f5-10f6-4d38-9ff4-a80b81da590d;Ip=[192.88.158.2] X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem X-MS-Exchange-Transport-CrossTenantHeadersStamped: BY2PR03MB332 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Correct Philipp's email address in the Cc list. Liu Ying On Mon, Feb 02, 2015 at 10:17:45AM +0800, Liu Ying wrote: > Hi, > > This version has been submitted for a while. > And, it looks there is no comments on this version. > Can the maintainers consider to take this? > > Mike, any comments on patch 01/21? It's a clock driver change. > > Regards, > Liu Ying > > On Wed, Dec 31, 2014 at 04:23:18PM +0800, Liu Ying wrote: > > Hi, > > > > This version mainly fixes the Kconfig for the Synopsys DesignWare MIPI DSI > > host controller bridge driver so that we may pass the allmodconfig for ARM. > > Also, this version contains a minor change for the Himax HX8369A panel > > driver to remove several unnecessary headers included. > > > > The i.MX MIPI DSI is a Synopsys DesignWare MIPI DSI host controller IP. > > This series adds support for a Synopsys DesignWare MIPI DSI host controller > > DRM bridge driver and a i.MX MIPI DSI specific DRM driver. > > Currently, the MIPI DSI drivers only support the burst with sync pulse mode. > > > > This series also includes a DRM panel driver for the Truly TFT480800-16-E panel > > which is driven by the Himax HX8369A driver IC. The driver IC data sheet could > > be found at [1]. As mentioned by the data sheet, the driver IC supports several > > interface modes. Currently, the DRM panel driver only supports the MIPI DSI video > > mode. New interface modes could be added later(perhaps, just like the way the DRM > > simple panel driver supports both MIPI DSI interface panels and simple(parallel) > > interface panels). > > > > The MIPI DSI feature is tested on i.MX6Q SabreSD board and i.MX6DL SabreSD board. > > The MIPI DSI display could be enabled directly on i.MX6Q SabreSD board after > > applying this series, because the 26.4MHz pixel clock the panel requires could be > > derived from the IPU HSP clock(264MHz) with an integer divider. > > On i.MX6DL SabreSD board, we need to manually disable the LVDS and HDMI displays in > > the device tree blob, since the i.MX6DL IPU HSP clock is 198MHz at present, which > > makes the pixel clock share the PLL5 video clock source with the LVDS and HDMI, > > thus, the panel cannot get the pixel clock rate it wants. > > > > Patch 01/21 is needed to get a precise pixel clock rate(26.4MHz) from the PLL5 video > > clock. If we don't have this patch, the pixel clock rate is about 20MHz, which > > causes a horitonal shift on the display image. > > > > This series can be applied on the drm-next branch. > > > > [1] http://www.allshore.com/pdf/Himax_HX8369-A.pdf > > > > Liu Ying (21): > > clk: divider: Correct parent clk round rate if no bestdiv is normally > > found > > of: Add vendor prefix for Himax Technologies Inc. > > of: Add vendor prefix for Truly Semiconductors Limited > > ARM: imx6q: Add GPR3 MIPI muxing control register field shift bits > > definition > > ARM: imx6q: clk: Add the video_27m clock > > ARM: imx6q: clk: Change hdmi_isfr clock's parent to be video_27m clock > > ARM: imx6q: clk: Change hsi_tx clock to be a shared clock gate > > ARM: imx6q: clk: Add support for mipi_core_cfg clock as a shared clock > > gate > > ARM: dts: imx6qdl: Move existing MIPI DSI ports into a new 'ports' > > node > > drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format > > Documentation: dt-bindings: Add bindings for Synopsys DW MIPI DSI DRM > > bridge driver > > drm/bridge: Add Synopsys DesignWare MIPI DSI host controller driver > > Documentation: dt-bindings: Add bindings for i.MX specific Synopsys DW > > MIPI DSI driver > > drm: imx: Support Synopsys DesignWare MIPI DSI host controller > > Documentation: dt-bindings: Add bindings for Himax HX8369A DRM panel > > driver > > drm: panel: Add support for Himax HX8369A MIPI DSI panel > > ARM: dtsi: imx6qdl: Add support for MIPI DSI host controller > > ARM: dts: imx6qdl-sabresd: Add support for TRULY TFT480800-16-E MIPI > > DSI panel > > ARM: imx_v6_v7_defconfig: Cleanup for imx drm being moved out of > > staging > > ARM: imx_v6_v7_defconfig: Add support for MIPI DSI host controller > > ARM: imx_v6_v7_defconfig: Add support for Himax HX8369A panel > > > > .../devicetree/bindings/drm/bridge/dw_mipi_dsi.txt | 73 ++ > > .../devicetree/bindings/drm/imx/mipi_dsi.txt | 78 ++ > > .../devicetree/bindings/panel/himax,hx8369a.txt | 39 + > > .../devicetree/bindings/vendor-prefixes.txt | 2 + > > arch/arm/boot/dts/imx6q.dtsi | 20 +- > > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 20 + > > arch/arm/boot/dts/imx6qdl.dtsi | 29 +- > > arch/arm/configs/imx_v6_v7_defconfig | 17 +- > > arch/arm/mach-imx/clk-imx6q.c | 7 +- > > drivers/clk/clk-divider.c | 3 +- > > drivers/gpu/drm/bridge/Kconfig | 10 + > > drivers/gpu/drm/bridge/Makefile | 1 + > > drivers/gpu/drm/bridge/dw_mipi_dsi.c | 996 +++++++++++++++++++++ > > drivers/gpu/drm/imx/Kconfig | 7 + > > drivers/gpu/drm/imx/Makefile | 1 + > > drivers/gpu/drm/imx/dw_mipi_dsi-imx.c | 230 +++++ > > drivers/gpu/drm/panel/Kconfig | 5 + > > drivers/gpu/drm/panel/Makefile | 1 + > > drivers/gpu/drm/panel/panel-himax-hx8369a.c | 610 +++++++++++++ > > include/drm/bridge/dw_mipi_dsi.h | 27 + > > include/drm/drm_mipi_dsi.h | 14 + > > include/dt-bindings/clock/imx6qdl-clock.h | 4 +- > > include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 1 + > > 23 files changed, 2165 insertions(+), 30 deletions(-) > > create mode 100644 Documentation/devicetree/bindings/drm/bridge/dw_mipi_dsi.txt > > create mode 100644 Documentation/devicetree/bindings/drm/imx/mipi_dsi.txt > > create mode 100644 Documentation/devicetree/bindings/panel/himax,hx8369a.txt > > create mode 100644 drivers/gpu/drm/bridge/dw_mipi_dsi.c > > create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx.c > > create mode 100644 drivers/gpu/drm/panel/panel-himax-hx8369a.c > > create mode 100644 include/drm/bridge/dw_mipi_dsi.h > > > > -- > > 2.1.0 > > > > _______________________________________________ > > dri-devel mailing list > > dri-devel@lists.freedesktop.org > > http://lists.freedesktop.org/mailman/listinfo/dri-devel > _______________________________________________ > dri-devel mailing list > dri-devel@lists.freedesktop.org > http://lists.freedesktop.org/mailman/listinfo/dri-devel