[PATCH 3.10 30/51] ARM: 8109/1: mm: Modify pte_write and pmd_write logic for LPAE

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Capper <steve.capper@linaro.org>

commit ded9477984690d026e46dd75e8157392cea3f13f upstream.

For LPAE, we have the following means for encoding writable or dirty
ptes:
                              L_PTE_DIRTY       L_PTE_RDONLY
    !pte_dirty && !pte_write        0               1
    !pte_dirty && pte_write         0               1
    pte_dirty && !pte_write         1               1
    pte_dirty && pte_write          1               0

So we can't distinguish between writeable clean ptes and read only
ptes. This can cause problems with ptes being incorrectly flagged as
read only when they are writeable but not dirty.

This patch renumbers L_PTE_RDONLY from AP[2] to a software bit #58,
and adds additional logic to set AP[2] whenever the pte is read only
or not dirty. That way we can distinguish between clean writeable ptes
and read only ptes.

HugeTLB pages will use this new logic automatically.

We need to add some logic to Transparent HugePages to ensure that they
correctly interpret the revised pgprot permissions (L_PTE_RDONLY has
moved and no longer matches PMD_SECT_AP2). In the process of revising
THP, the names of the PMD software bits have been prefixed with L_ to
make them easier to distinguish from their hardware bit counterparts.


Signed-off-by: Steve Capper <steve.capper@linaro.org>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
[hpy: Backported to 3.10
 - adjust the context
 - ignore change related to pmd, because 3.10 does not support HugePage ]
Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/pgtable-3level-hwdef.h |    1 +
 arch/arm/include/asm/pgtable-3level.h       |    6 +++---
 arch/arm/mm/proc-v7-3level.S                |    9 +++++++--
 3 files changed, 11 insertions(+), 5 deletions(-)

--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -68,6 +68,7 @@
 #define PTE_TYPE_PAGE		(_AT(pteval_t, 3) << 0)
 #define PTE_BUFFERABLE		(_AT(pteval_t, 1) << 2)		/* AttrIndx[0] */
 #define PTE_CACHEABLE		(_AT(pteval_t, 1) << 3)		/* AttrIndx[1] */
+#define PTE_AP2			(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define PTE_EXT_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define PTE_EXT_AF		(_AT(pteval_t, 1) << 10)	/* Access Flag */
 #define PTE_EXT_NG		(_AT(pteval_t, 1) << 11)	/* nG */
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -71,13 +71,13 @@
 #define L_PTE_PRESENT		(_AT(pteval_t, 3) << 0)		/* Present */
 #define L_PTE_FILE		(_AT(pteval_t, 1) << 2)		/* only when !PRESENT */
 #define L_PTE_USER		(_AT(pteval_t, 1) << 6)		/* AP[1] */
-#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 7)		/* AP[2] */
 #define L_PTE_SHARED		(_AT(pteval_t, 3) << 8)		/* SH[1:0], inner shareable */
 #define L_PTE_YOUNG		(_AT(pteval_t, 1) << 10)	/* AF */
 #define L_PTE_XN		(_AT(pteval_t, 1) << 54)	/* XN */
-#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)	/* unused */
-#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)	/* unused */
+#define L_PTE_DIRTY		(_AT(pteval_t, 1) << 55)
+#define L_PTE_SPECIAL		(_AT(pteval_t, 1) << 56)
 #define L_PTE_NONE		(_AT(pteval_t, 1) << 57)	/* PROT_NONE */
+#define L_PTE_RDONLY		(_AT(pteval_t, 1) << 58)	/* READ ONLY */
 
 /*
  * To be used in assembly code with the upper page attributes.
--- a/arch/arm/mm/proc-v7-3level.S
+++ b/arch/arm/mm/proc-v7-3level.S
@@ -78,8 +78,13 @@ ENTRY(cpu_v7_set_pte_ext)
 	tst	rh, #1 << (57 - 32)		@ L_PTE_NONE
 	bicne	rl, #L_PTE_VALID
 	bne	1f
-	tst	rh, #1 << (55 - 32)		@ L_PTE_DIRTY
-	orreq	rl, #L_PTE_RDONLY
+
+	eor	ip, rh, #1 << (55 - 32)	@ toggle L_PTE_DIRTY in temp reg to
+					@ test for !L_PTE_DIRTY || L_PTE_RDONLY
+	tst	ip, #1 << (55 - 32) | 1 << (58 - 32)
+	orrne	rl, #PTE_AP2
+	biceq	rl, #PTE_AP2
+
 1:	strd	r2, r3, [r0]
 	ALT_SMP(W(nop))
 	ALT_UP (mcr	p15, 0, r0, c7, c10, 1)		@ flush_pte