[PATCH 3.19 013/177] net: phy: Fix verification of EEE support in phy_init_eee

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

3.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Guenter Roeck <linux@roeck-us.net>

[ Upstream commit 54da5a8be3c1e924c35480eb44c6e9b275f6444e ]

phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex)
to find a valid entry in the settings array for the given speed
and duplex value. For full duplex 1000baseT, this will return
the first matching entry, which is the entry for 1000baseKX_Full.

If the phy eee does not support 1000baseKX_Full, this entry will not
match, causing phy_init_eee to fail for no good reason.

Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support")
Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array")
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy.c |   23 ++++++++++++++++++++---
 1 file changed, 20 insertions(+), 3 deletions(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -236,6 +236,25 @@ static inline unsigned int phy_find_vali
 }
 
 /**
+ * phy_check_valid - check if there is a valid PHY setting which matches
+ *		     speed, duplex, and feature mask
+ * @speed: speed to match
+ * @duplex: duplex to match
+ * @features: A mask of the valid settings
+ *
+ * Description: Returns true if there is a valid setting, false otherwise.
+ */
+static inline bool phy_check_valid(int speed, int duplex, u32 features)
+{
+	unsigned int idx;
+
+	idx = phy_find_valid(phy_find_setting(speed, duplex), features);
+
+	return settings[idx].speed == speed && settings[idx].duplex == duplex &&
+		(settings[idx].setting & features);
+}
+
+/**
  * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
  * @phydev: the target phy_device struct
  *
@@ -1042,7 +1061,6 @@ int phy_init_eee(struct phy_device *phyd
 		int eee_lp, eee_cap, eee_adv;
 		u32 lp, cap, adv;
 		int status;
-		unsigned int idx;
 
 		/* Read phy status to properly get the right settings */
 		status = phy_read_status(phydev);
@@ -1074,8 +1092,7 @@ int phy_init_eee(struct phy_device *phyd
 
 		adv = mmd_eee_adv_to_ethtool_adv_t(eee_adv);
 		lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
-		idx = phy_find_setting(phydev->speed, phydev->duplex);
-		if (!(lp & adv & settings[idx].setting))
+		if (!phy_check_valid(phydev->speed, phydev->duplex, lp & adv))
 			goto eee_exit_err;
 
 		if (clk_stop_enable) {