[PATCH 3.14 00/79] 3.14.37-stable review

[PATCH 3.14 00/79] 3.14.37-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.14.37 release.
There are 79 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.14.37-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.14.37-rc1

Lee Duncan <lduncan@suse.com>
    target: Allow Write Exclusive non-reservation holders to READ

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Allow AllRegistrants to re-RESERVE existing reservation

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Avoid dropping AllRegistrants reservation during unregister

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Fix R_HOLDER bit usage for AllRegistrants

Nicholas Bellinger <nab@linux-iscsi.org>
    target/pscsi: Fix NULL pointer dereference in get_device_type

Nicholas Bellinger <nab@linux-iscsi.org>
    iscsi-target: Avoid early conn_logout_comp for iser connections

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Fix virtual LUN=0 target_configure_device failure OOPs

Bart Van Assche <bart.vanassche@sandisk.com>
    target: Fix reference leak in target_get_sess_cmd() error path

Ravikumar Kattekola <rk@ti.com>
    ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others

Alexandre Belloni <alexandre.belloni@free-electrons.com>
    ARM: at91: pm: fix at91rm9200 standby

Peter Chen <peter.chen@freescale.com>
    ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg

Suzuki K. Poulose <suzuki.poulose@arm.com>
    arm64: Honor __GFP_ZERO in dma allocations

Peter Chen <peter.chen@freescale.com>
    ARM: imx6sl-evk: set swbst_reg as vbus's parent reg

Eric Dumazet <edumazet@google.com>
    netfilter: xt_socket: fix a stack corruption bug

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nft_compat: fix module refcount underflow

Julian Anastasov <ja@ssi.bg>
    ipvs: rerouting to local clients is not needed anymore

Julian Anastasov <ja@ssi.bg>
    ipvs: add missing ip_vs_pe_put in sync code

Jiri Slaby <jslaby@suse.cz>
    x86/vdso: Fix the build on GCC5

Oleg Nesterov <oleg@redhat.com>
    x86/fpu: Drop_fpu() should not assume that tsk equals current

Oleg Nesterov <oleg@redhat.com>
    x86/fpu: Avoid math_state_restore() without used_math() in __restore_xstate_sig()

Stephan Mueller <smueller@chronox.de>
    crypto: aesni - fix memory usage in GCM decryption

Ard Biesheuvel <ard.biesheuvel@linaro.org>
    crypto: arm/aes update NEON AES module to latest OpenSSL version

Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
    pagemap: do not leak physical addresses to non-privileged userspace

James Bottomley <JBottomley@Parallels.com>
    libsas: Fix Kernel Crash in smp_execute_task

Jan Beulich <JBeulich@suse.com>
    xen-pciback: limit guest control of command register

Juergen Gross <jgross@suse.com>
    xen/events: avoid NULL pointer dereference in dom0 on large machines

Thomas Hellstrom <thellstrom@vmware.com>
    drm/vmwgfx: Reorder device takedown somewhat

Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
    nilfs2: fix deadlock of segment constructor during recovery

Doug Anderson <dianders@chromium.org>
    regulator: core: Fix enable GPIO reference counting

Javier Martinez Canillas <javier.martinez@collabora.co.uk>
    regulator: Only enable disabled regulators on resume

Brian King <brking@linux.vnet.ibm.com>
    bnx2x: Force fundamental reset for EEH recovery

Maxime Ripard <maxime.ripard@free-electrons.com>
    mtd: nand: pxa3xx: Fix PIO FIFO draining

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Treat stereo-to-mono mix properly

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix regression of HD-audio controller fallback modes

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Set single_adc_amp flag for CS420x codecs

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Don't access stereo amps for mono channel widgets

Takashi Iwai <tiwai@suse.de>
    ALSA: hda - Fix built-in mic on Compaq Presario CQ60

Takashi Iwai <tiwai@suse.de>
    ALSA: control: Add sanity checks for user ctl id name string

Daniel Mack <daniel@zonque.org>
    ALSA: snd-usb: add quirks for Roland UA-22

Alexander Sverdlin <alexander.sverdlin@nokia.com>
    spi: pl022: Fix race in giveback() leading to driver lock-up

Torsten Fleischer <torfl6749@gmail.com>
    spi: atmel: Fix interrupt setup for PDC transfers

jmlatten@linux.vnet.ibm.com <jmlatten@linux.vnet.ibm.com>
    tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send

Jason Low <jason.low2@hp.com>
    cpuset: Fix cpuset sched_relax_domain_level

Tejun Heo <tj@kernel.org>
    workqueue: fix hang involving racing cancel[_delayed]_work_sync()'s for PREEMPT_NONE

Oliver Hartkopp <socketcan@hartkopp.net>
    can: add missing initialisations in CAN related skbuffs

Russell King <rmk+kernel@arm.linux.org.uk>
    Change email address for 8250_pci

Michael S. Tsirkin <mst@redhat.com>
    virtio_console: avoid config access from irq

Michael S. Tsirkin <mst@redhat.com>
    virtio_console: init work unconditionally

Peter Hurley <peter@hurleysoftware.com>
    console: Fix console name size mismatch

Miklos Szeredi <mszeredi@suse.cz>
    fuse: notify: don't move pages

Miklos Szeredi <mszeredi@suse.cz>
    fuse: set stolen page uptodate

JeHyeon Yeon <tom.yeon@windriver.com>
    LZ4 : fix the data abort issue

Christian König <christian.koenig@amd.com>
    drm/radeon: drop setting UPLL to sleep mode

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: fix interlaced modes on DCE8

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in rs600_set_irq

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in si_set_irq

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in cik_set_irq

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in r600_set_irq

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in r100_set_irq

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: do a posting read in evergreen_set_irq

Tommi Rantala <tt.rantala@gmail.com>
    drm/radeon: fix DRM_IOCTL_RADEON_CS oops

Eric Dumazet <edumazet@google.com>
    tcp: make connect() mem charging friendly

Catalin Marinas <catalin.marinas@arm.com>
    net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour

Josh Hunt <johunt@akamai.com>
    tcp: fix tcp fin memory accounting

Steven Barth <cyrus@openwrt.org>
    ipv6: fix backtracking for throw routes

Ondrej Zary <linux@rainbow-software.org>
    Revert "net: cx82310_eth: use common match macro"

Al Viro <viro@ZenIV.linux.org.uk>
    rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()

Al Viro <viro@ZenIV.linux.org.uk>
    caif: fix MSG_OOB test in caif_seqpkt_recvmsg()

Eric Dumazet <edumazet@google.com>
    inet_diag: fix possible overflow in inet_diag_dump_one_icsk()

Arnd Bergmann <arnd@arndb.de>
    rds: avoid potential stack overflow

Alexey Kodanev <alexey.kodanev@oracle.com>
    net: sysctl_net_core: check SNDBUF and RCVBUF for min length

David S. Miller <davem@davemloft.net>
    sparc64: Fix several bugs in memmove().

David Ahern <david.ahern@oracle.com>
    sparc: Touch NMI watchdog when walking cpus and calling printk

David Ahern <david.ahern@oracle.com>
    sparc: perf: Make counting mode actually work

David Ahern <david.ahern@oracle.com>
    sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

Rob Gardner <rob.gardner@oracle.com>
    sparc: semtimedop() unreachable due to comparison error

Andreas Larsson <andreas@gaisler.com>
    sparc32: destroy_context() and switch_mm() needs to disable interrupts.

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    iio: mxs-lradc: fix merge error


-------------

Diffstat:

 Makefile                                         |   4 +-
 arch/arm/boot/dts/dra7xx-clocks.dtsi             |  90 ++++++++++++++--
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi           |   2 +
 arch/arm/boot/dts/imx6sl-evk.dts                 |   2 +
 arch/arm/crypto/aesbs-core.S_shipped             |  12 ++-
 arch/arm/crypto/bsaes-armv7.pl                   |  12 ++-
 arch/arm/mach-at91/pm.h                          |   2 +-
 arch/arm64/mm/dma-mapping.c                      |   6 +-
 arch/sparc/kernel/perf_event.c                   |  15 +--
 arch/sparc/kernel/process_64.c                   |   4 +
 arch/sparc/kernel/sys_sparc_64.c                 |   2 +-
 arch/sparc/lib/memmove.S                         |  35 +++++-
 arch/sparc/mm/srmmu.c                            |  11 +-
 arch/x86/crypto/aesni-intel_glue.c               |   4 +-
 arch/x86/include/asm/fpu-internal.h              |   2 +-
 arch/x86/kernel/xsave.c                          |   7 +-
 arch/x86/vdso/vdso32/sigreturn.S                 |   1 +
 drivers/char/tpm/tpm_ibmvtpm.c                   |  10 +-
 drivers/char/tpm/tpm_ibmvtpm.h                   |   6 +-
 drivers/char/virtio_console.c                    |  19 +++-
 drivers/gpu/drm/radeon/atombios_crtc.c           |   3 +
 drivers/gpu/drm/radeon/cik.c                     |   3 +
 drivers/gpu/drm/radeon/evergreen.c               |   3 +
 drivers/gpu/drm/radeon/r100.c                    |   4 +
 drivers/gpu/drm/radeon/r600.c                    |   3 +
 drivers/gpu/drm/radeon/radeon_cs.c               |   4 +-
 drivers/gpu/drm/radeon/rs600.c                   |   4 +
 drivers/gpu/drm/radeon/si.c                      |   9 +-
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c              |  77 +++++++-------
 drivers/mtd/nand/pxa3xx_nand.c                   |  48 +++++++--
 drivers/net/can/dev.c                            |   8 ++
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |   3 +
 drivers/net/usb/cx82310_eth.c                    |  11 +-
 drivers/regulator/core.c                         |  34 +++---
 drivers/scsi/libsas/sas_discover.c               |   6 +-
 drivers/spi/spi-atmel.c                          |  12 +--
 drivers/spi/spi-pl022.c                          |   2 +-
 drivers/staging/iio/adc/mxs-lradc.c              |   1 -
 drivers/target/iscsi/iscsi_target.c              |  14 ++-
 drivers/target/target_core_device.c              |   4 +-
 drivers/target/target_core_pr.c                  | 130 ++++++++++++++++++-----
 drivers/target/target_core_pscsi.c               |   2 +-
 drivers/target/target_core_transport.c           |   4 +
 drivers/tty/serial/8250/8250_pci.c               |   2 +-
 drivers/xen/events/events_base.c                 |  18 ++--
 drivers/xen/xen-pciback/conf_space.c             |   2 +-
 drivers/xen/xen-pciback/conf_space.h             |   2 +
 drivers/xen/xen-pciback/conf_space_header.c      |  61 ++++++++---
 fs/fuse/dev.c                                    |   7 +-
 fs/nilfs2/segment.c                              |   7 +-
 fs/proc/task_mmu.c                               |   3 +
 include/linux/workqueue.h                        |   3 +-
 kernel/cpuset.c                                  |   3 -
 kernel/printk/console_cmdline.h                  |   2 +-
 kernel/printk/printk.c                           |   1 +
 kernel/workqueue.c                               |  56 +++++++++-
 lib/lz4/lz4_decompress.c                         |   3 +
 net/caif/caif_socket.c                           |   2 +-
 net/can/af_can.c                                 |   3 +
 net/compat.c                                     |   7 ++
 net/core/sysctl_net_core.c                       |  10 +-
 net/ipv4/inet_diag.c                             |  18 +++-
 net/ipv4/tcp_output.c                            |  68 +++++-------
 net/ipv6/fib6_rules.c                            |   1 +
 net/netfilter/ipvs/ip_vs_core.c                  |  33 ++++--
 net/netfilter/ipvs/ip_vs_sync.c                  |   3 +
 net/netfilter/nft_compat.c                       |  12 ++-
 net/netfilter/xt_socket.c                        |  21 ++--
 net/rds/iw_rdma.c                                |  40 +++----
 net/rxrpc/ar-recvmsg.c                           |   2 +-
 sound/core/control.c                             |   4 +
 sound/pci/hda/hda_generic.c                      |  47 ++++++--
 sound/pci/hda/hda_intel.c                        |   2 +-
 sound/pci/hda/hda_proc.c                         |  38 +++++--
 sound/pci/hda/patch_cirrus.c                     |   2 +
 sound/pci/hda/patch_conexant.c                   |  11 ++
 sound/usb/quirks-table.h                         |  30 ++++++
 77 files changed, 853 insertions(+), 306 deletions(-)

[PATCH 3.14 02/79] sparc32: destroy_context() and switch_mm() needs to disable interrupts.

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andreas Larsson <andreas@gaisler.com>

[ Upstream commit 66d0f7ec9f1038452178b1993fc07fd96d30fd38 ]

Load balancing can be triggered in the critical sections protected by
srmmu_context_spinlock in destroy_context() and switch_mm() and can hang
the cpu waiting for the rq lock of another cpu that in turn has called
switch_mm hangning on srmmu_context_spinlock leading to deadlock.

So, disable interrupt while taking srmmu_context_spinlock in
destroy_context() and switch_mm() so we don't deadlock.

See also commit 77b838fa1ef0 ("[SPARC64]: destroy_context() needs to disable
interrupts.")

Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/mm/srmmu.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/arch/sparc/mm/srmmu.c
+++ b/arch/sparc/mm/srmmu.c
@@ -460,10 +460,12 @@ static void __init sparc_context_init(in
 void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm,
 	       struct task_struct *tsk)
 {
+	unsigned long flags;
+
 	if (mm->context == NO_CONTEXT) {
-		spin_lock(&srmmu_context_spinlock);
+		spin_lock_irqsave(&srmmu_context_spinlock, flags);
 		alloc_context(old_mm, mm);
-		spin_unlock(&srmmu_context_spinlock);
+		spin_unlock_irqrestore(&srmmu_context_spinlock, flags);
 		srmmu_ctxd_set(&srmmu_context_table[mm->context], mm->pgd);
 	}
 
@@ -988,14 +990,15 @@ int init_new_context(struct task_struct
 
 void destroy_context(struct mm_struct *mm)
 {
+	unsigned long flags;
 
 	if (mm->context != NO_CONTEXT) {
 		flush_cache_mm(mm);
 		srmmu_ctxd_set(&srmmu_context_table[mm->context], srmmu_swapper_pg_dir);
 		flush_tlb_mm(mm);
-		spin_lock(&srmmu_context_spinlock);
+		spin_lock_irqsave(&srmmu_context_spinlock, flags);
 		free_context(mm->context);
-		spin_unlock(&srmmu_context_spinlock);
+		spin_unlock_irqrestore(&srmmu_context_spinlock, flags);
 		mm->context = NO_CONTEXT;
 	}
 }

[PATCH 3.14 03/79] sparc: semtimedop() unreachable due to comparison error

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rob Gardner <rob.gardner@oracle.com>

[ Upstream commit 53eb2516972b8c4628651dfcb926cb9ef8b2864a ]

A bug was reported that the semtimedop() system call was always
failing eith ENOSYS.

Since SEMCTL is defined as 3, and SEMTIMEDOP is defined as 4,
the comparison "call <= SEMCTL" will always prevent SEMTIMEDOP
from getting through to the semaphore ops switch statement.

This is corrected by changing the comparison to "call <= SEMTIMEDOP".

Orabug: 20633375

Signed-off-by: Rob Gardner <rob.gardner@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/sys_sparc_64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -332,7 +332,7 @@ SYSCALL_DEFINE6(sparc_ipc, unsigned int,
 	long err;
 
 	/* No need for backward compatibility. We can start fresh... */
-	if (call <= SEMCTL) {
+	if (call <= SEMTIMEDOP) {
 		switch (call) {
 		case SEMOP:
 			err = sys_semtimedop(first, ptr,

[PATCH 3.14 04/79] sparc: perf: Remove redundant perf_pmu_{en|dis}able calls

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <david.ahern@oracle.com>

[ Upstream commit 5b0d4b5514bbcce69b516d0742f2cfc84ebd6db3 ]

perf_pmu_disable is called by core perf code before pmu->del and the
enable function is called by core perf code afterwards. No need to
call again within sparc_pmu_del.

Ditto for pmu->add and sparc_pmu_add.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/perf_event.c |    4 ----
 1 file changed, 4 deletions(-)

--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -1101,7 +1101,6 @@ static void sparc_pmu_del(struct perf_ev
 	int i;
 
 	local_irq_save(flags);
-	perf_pmu_disable(event->pmu);
 
 	for (i = 0; i < cpuc->n_events; i++) {
 		if (event == cpuc->event[i]) {
@@ -1127,7 +1126,6 @@ static void sparc_pmu_del(struct perf_ev
 		}
 	}
 
-	perf_pmu_enable(event->pmu);
 	local_irq_restore(flags);
 }
 
@@ -1361,7 +1359,6 @@ static int sparc_pmu_add(struct perf_eve
 	unsigned long flags;
 
 	local_irq_save(flags);
-	perf_pmu_disable(event->pmu);
 
 	n0 = cpuc->n_events;
 	if (n0 >= sparc_pmu->max_hw_events)
@@ -1394,7 +1391,6 @@ nocheck:
 
 	ret = 0;
 out:
-	perf_pmu_enable(event->pmu);
 	local_irq_restore(flags);
 	return ret;
 }

[PATCH 3.14 05/79] sparc: perf: Make counting mode actually work

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <david.ahern@oracle.com>

[ Upstream commit d51291cb8f32bfae6b331e1838651f3ddefa73a5 ]

Currently perf-stat (aka, counting mode) does not work:

$ perf stat ls
...
 Performance counter stats for 'ls':

          1.585665      task-clock (msec)         #    0.580 CPUs utilized
                24      context-switches          #    0.015 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                86      page-faults               #    0.054 M/sec
   <not supported>      cycles
   <not supported>      stalled-cycles-frontend
   <not supported>      stalled-cycles-backend
   <not supported>      instructions
   <not supported>      branches
   <not supported>      branch-misses

       0.002735100 seconds time elapsed

The reason is that state is never reset (stays with PERF_HES_UPTODATE set).
Add a call to sparc_pmu_enable_event during the added_event handling.
Clean up the encoding since pmu_start calls sparc_pmu_enable_event which
does the same. Passing PERF_EF_RELOAD to sparc_pmu_start means the call
to sparc_perf_event_set_period can be removed as well.

With this patch:

$ perf stat ls
...
 Performance counter stats for 'ls':

          1.552890      task-clock (msec)         #    0.552 CPUs utilized
                24      context-switches          #    0.015 M/sec
                 0      cpu-migrations            #    0.000 K/sec
                86      page-faults               #    0.055 M/sec
         5,748,997      cycles                    #    3.702 GHz
   <not supported>      stalled-cycles-frontend:HG
   <not supported>      stalled-cycles-backend:HG
         1,684,362      instructions:HG           #    0.29  insns per cycle
           295,133      branches:HG               #  190.054 M/sec
            28,007      branch-misses:HG          #    9.49% of all branches

       0.002815665 seconds time elapsed

Signed-off-by: David Ahern <david.ahern@oracle.com>
Acked-by: Bob Picco <bob.picco@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/perf_event.c |   11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

--- a/arch/sparc/kernel/perf_event.c
+++ b/arch/sparc/kernel/perf_event.c
@@ -960,6 +960,8 @@ out:
 	cpuc->pcr[0] |= cpuc->event[0]->hw.config_base;
 }
 
+static void sparc_pmu_start(struct perf_event *event, int flags);
+
 /* On this PMU each PIC has it's own PCR control register.  */
 static void calculate_multiple_pcrs(struct cpu_hw_events *cpuc)
 {
@@ -972,20 +974,13 @@ static void calculate_multiple_pcrs(stru
 		struct perf_event *cp = cpuc->event[i];
 		struct hw_perf_event *hwc = &cp->hw;
 		int idx = hwc->idx;
-		u64 enc;
 
 		if (cpuc->current_idx[i] != PIC_NO_INDEX)
 			continue;
 
-		sparc_perf_event_set_period(cp, hwc, idx);
 		cpuc->current_idx[i] = idx;
 
-		enc = perf_event_get_enc(cpuc->events[i]);
-		cpuc->pcr[idx] &= ~mask_for_index(idx);
-		if (hwc->state & PERF_HES_STOPPED)
-			cpuc->pcr[idx] |= nop_for_index(idx);
-		else
-			cpuc->pcr[idx] |= event_encoding(enc, idx);
+		sparc_pmu_start(cp, PERF_EF_RELOAD);
 	}
 out:
 	for (i = 0; i < cpuc->n_events; i++) {

[PATCH 3.14 06/79] sparc: Touch NMI watchdog when walking cpus and calling printk

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Ahern <david.ahern@oracle.com>

[ Upstream commit 31aaa98c248da766ece922bbbe8cc78cfd0bc920 ]

With the increase in number of CPUs calls to functions that dump
output to console (e.g., arch_trigger_all_cpu_backtrace) can take
a long time to complete. If IRQs are disabled eventually the NMI
watchdog kicks in and creates more havoc. Avoid by telling the NMI
watchdog everything is ok.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/kernel/process_64.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -281,6 +281,8 @@ void arch_trigger_all_cpu_backtrace(void
 			printk("             TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
 			       gp->tpc, gp->o7, gp->i7, gp->rpc);
 		}
+
+		touch_nmi_watchdog();
 	}
 
 	memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot));
@@ -356,6 +358,8 @@ static void pmu_snapshot_all_cpus(void)
 		       (cpu == this_cpu ? '*' : ' '), cpu,
 		       pp->pcr[0], pp->pcr[1], pp->pcr[2], pp->pcr[3],
 		       pp->pic[0], pp->pic[1], pp->pic[2], pp->pic[3]);
+
+		touch_nmi_watchdog();
 	}
 
 	memset(global_cpu_snapshot, 0, sizeof(global_cpu_snapshot));

[PATCH 3.14 07/79] sparc64: Fix several bugs in memmove().

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "David S. Miller" <davem@davemloft.net>

[ Upstream commit 2077cef4d5c29cf886192ec32066f783d6a80db8 ]

Firstly, handle zero length calls properly.  Believe it or not there
are a few of these happening during early boot.

Next, we can't just drop to a memcpy() call in the forward copy case
where dst <= src.  The reason is that the cache initializing stores
used in the Niagara memcpy() implementations can end up clearing out
cache lines before we've sourced their original contents completely.

For example, considering NG4memcpy, the main unrolled loop begins like
this:

     load   src + 0x00
     load   src + 0x08
     load   src + 0x10
     load   src + 0x18
     load   src + 0x20
     store  dst + 0x00

Assume dst is 64 byte aligned and let's say that dst is src - 8 for
this memcpy() call.  That store at the end there is the one to the
first line in the cache line, thus clearing the whole line, which thus
clobbers "src + 0x28" before it even gets loaded.

To avoid this, just fall through to a simple copy only mildly
optimized for the case where src and dst are 8 byte aligned and the
length is a multiple of 8 as well.  We could get fancy and call
GENmemcpy() but this is good enough for how this thing is actually
used.

Reported-by: David Ahern <david.ahern@oracle.com>
Reported-by: Bob Picco <bpicco@meloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 arch/sparc/lib/memmove.S |   35 ++++++++++++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 3 deletions(-)

--- a/arch/sparc/lib/memmove.S
+++ b/arch/sparc/lib/memmove.S
@@ -8,9 +8,11 @@
 
 	.text
 ENTRY(memmove) /* o0=dst o1=src o2=len */
-	mov		%o0, %g1
+	brz,pn		%o2, 99f
+	 mov		%o0, %g1
+
 	cmp		%o0, %o1
-	bleu,pt		%xcc, memcpy
+	bleu,pt		%xcc, 2f
 	 add		%o1, %o2, %g7
 	cmp		%g7, %o0
 	bleu,pt		%xcc, memcpy
@@ -24,7 +26,34 @@ ENTRY(memmove) /* o0=dst o1=src o2=len *
 	stb		%g7, [%o0]
 	bne,pt		%icc, 1b
 	 sub		%o0, 1, %o0
-
+99:
 	retl
 	 mov		%g1, %o0
+
+	/* We can't just call memcpy for these memmove cases.  On some
+	 * chips the memcpy uses cache initializing stores and when dst
+	 * and src are close enough, those can clobber the source data
+	 * before we've loaded it in.
+	 */
+2:	or		%o0, %o1, %g7
+	or		%o2, %g7, %g7
+	andcc		%g7, 0x7, %g0
+	bne,pn		%xcc, 4f
+	 nop
+
+3:	ldx		[%o1], %g7
+	add		%o1, 8, %o1
+	subcc		%o2, 8, %o2
+	add		%o0, 8, %o0
+	bne,pt		%icc, 3b
+	 stx		%g7, [%o0 - 0x8]
+	ba,a,pt		%xcc, 99b
+
+4:	ldub		[%o1], %g7
+	add		%o1, 1, %o1
+	subcc		%o2, 1, %o2
+	add		%o0, 1, %o0
+	bne,pt		%icc, 4b
+	 stb		%g7, [%o0 - 0x1]
+	ba,a,pt		%xcc, 99b
 ENDPROC(memmove)

[PATCH 3.14 08/79] net: sysctl_net_core: check SNDBUF and RCVBUF for min length

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Kodanev <alexey.kodanev@oracle.com>

[ Upstream commit b1cb59cf2efe7971d3d72a7b963d09a512d994c9 ]

sysctl has sysctl.net.core.rmem_*/wmem_* parameters which can be
set to incorrect values. Given that 'struct sk_buff' allocates from
rcvbuf, incorrectly set buffer length could result to memory
allocation failures. For example, set them as follows:

    # sysctl net.core.rmem_default=64
      net.core.wmem_default = 64
    # sysctl net.core.wmem_default=64
      net.core.wmem_default = 64
    # ping localhost -s 1024 -i 0 > /dev/null

This could result to the following failure:

skbuff: skb_over_panic: text:ffffffff81628db4 len:-32 put:-32
head:ffff88003a1cc200 data:ffff88003a1cc200 tail:0xffffffe0 end:0xc0 dev:<NULL>
kernel BUG at net/core/skbuff.c:102!
invalid opcode: 0000 [#1] SMP
...
task: ffff88003b7f5550 ti: ffff88003ae88000 task.ti: ffff88003ae88000
RIP: 0010:[<ffffffff8155fbd1>]  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP: 0018:ffff88003ae8bc68  EFLAGS: 00010296
RAX: 000000000000008d RBX: 00000000ffffffe0 RCX: 0000000000000000
RDX: ffff88003fdcf598 RSI: ffff88003fdcd9c8 RDI: ffff88003fdcd9c8
RBP: ffff88003ae8bc88 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: 00000000000002b2 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88003d3f7300 R15: ffff88000012a900
FS:  00007fa0e2b4a840(0000) GS:ffff88003fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000d0f7e0 CR3: 000000003b8fb000 CR4: 00000000000006f0
Stack:
 ffff88003a1cc200 00000000ffffffe0 00000000000000c0 ffffffff818cab1d
 ffff88003ae8bd68 ffffffff81628db4 ffff88003ae8bd48 ffff88003b7f5550
 ffff880031a09408 ffff88003b7f5550 ffff88000012aa48 ffff88000012ab00
Call Trace:
 [<ffffffff81628db4>] unix_stream_sendmsg+0x2c4/0x470
 [<ffffffff81556f56>] sock_write_iter+0x146/0x160
 [<ffffffff811d9612>] new_sync_write+0x92/0xd0
 [<ffffffff811d9cd6>] vfs_write+0xd6/0x180
 [<ffffffff811da499>] SyS_write+0x59/0xd0
 [<ffffffff81651532>] system_call_fastpath+0x12/0x17
Code: 00 00 48 89 44 24 10 8b 87 c8 00 00 00 48 89 44 24 08 48 8b 87 d8 00
      00 00 48 c7 c7 30 db 91 81 48 89 04 24 31 c0 e8 4f a8 0e 00 <0f> 0b
      eb fe 66 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 48 83
RIP  [<ffffffff8155fbd1>] skb_put+0xa1/0xb0
RSP <ffff88003ae8bc68>
Kernel panic - not syncing: Fatal exception

Moreover, the possible minimum is 1, so we can get another kernel panic:
...
BUG: unable to handle kernel paging request at ffff88013caee5c0
IP: [<ffffffff815604cf>] __alloc_skb+0x12f/0x1f0
...

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/sysctl_net_core.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -25,6 +25,8 @@
 static int zero = 0;
 static int one = 1;
 static int ushort_max = USHRT_MAX;
+static int min_sndbuf = SOCK_MIN_SNDBUF;
+static int min_rcvbuf = SOCK_MIN_RCVBUF;
 
 #ifdef CONFIG_RPS
 static int rps_sock_flow_sysctl(struct ctl_table *table, int write,
@@ -223,7 +225,7 @@ static struct ctl_table net_core_table[]
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &one,
+		.extra1		= &min_sndbuf,
 	},
 	{
 		.procname	= "rmem_max",
@@ -231,7 +233,7 @@ static struct ctl_table net_core_table[]
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &one,
+		.extra1		= &min_rcvbuf,
 	},
 	{
 		.procname	= "wmem_default",
@@ -239,7 +241,7 @@ static struct ctl_table net_core_table[]
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &one,
+		.extra1		= &min_sndbuf,
 	},
 	{
 		.procname	= "rmem_default",
@@ -247,7 +249,7 @@ static struct ctl_table net_core_table[]
 		.maxlen		= sizeof(int),
 		.mode		= 0644,
 		.proc_handler	= proc_dointvec_minmax,
-		.extra1		= &one,
+		.extra1		= &min_rcvbuf,
 	},
 	{
 		.procname	= "dev_weight",

[PATCH 3.14 09/79] rds: avoid potential stack overflow

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <arnd@arndb.de>

[ Upstream commit f862e07cf95d5b62a5fc5e981dd7d0dbaf33a501 ]

The rds_iw_update_cm_id function stores a large 'struct rds_sock' object
on the stack in order to pass a pair of addresses. This happens to just
fit withint the 1024 byte stack size warning limit on x86, but just
exceed that limit on ARM, which gives us this warning:

net/rds/iw_rdma.c:200:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]

As the use of this large variable is basically bogus, we can rearrange
the code to not do that. Instead of passing an rds socket into
rds_iw_get_device, we now just pass the two addresses that we have
available in rds_iw_update_cm_id, and we change rds_iw_get_mr accordingly,
to create two address structures on the stack there.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rds/iw_rdma.c |   40 ++++++++++++++++++++++------------------
 1 file changed, 22 insertions(+), 18 deletions(-)

--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -88,7 +88,9 @@ static unsigned int rds_iw_unmap_fastreg
 			int *unpinned);
 static void rds_iw_destroy_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
 
-static int rds_iw_get_device(struct rds_sock *rs, struct rds_iw_device **rds_iwdev, struct rdma_cm_id **cm_id)
+static int rds_iw_get_device(struct sockaddr_in *src, struct sockaddr_in *dst,
+			     struct rds_iw_device **rds_iwdev,
+			     struct rdma_cm_id **cm_id)
 {
 	struct rds_iw_device *iwdev;
 	struct rds_iw_cm_id *i_cm_id;
@@ -112,15 +114,15 @@ static int rds_iw_get_device(struct rds_
 				src_addr->sin_port,
 				dst_addr->sin_addr.s_addr,
 				dst_addr->sin_port,
-				rs->rs_bound_addr,
-				rs->rs_bound_port,
-				rs->rs_conn_addr,
-				rs->rs_conn_port);
+				src->sin_addr.s_addr,
+				src->sin_port,
+				dst->sin_addr.s_addr,
+				dst->sin_port);
 #ifdef WORKING_TUPLE_DETECTION
-			if (src_addr->sin_addr.s_addr == rs->rs_bound_addr &&
-			    src_addr->sin_port == rs->rs_bound_port &&
-			    dst_addr->sin_addr.s_addr == rs->rs_conn_addr &&
-			    dst_addr->sin_port == rs->rs_conn_port) {
+			if (src_addr->sin_addr.s_addr == src->sin_addr.s_addr &&
+			    src_addr->sin_port == src->sin_port &&
+			    dst_addr->sin_addr.s_addr == dst->sin_addr.s_addr &&
+			    dst_addr->sin_port == dst->sin_port) {
 #else
 			/* FIXME - needs to compare the local and remote
 			 * ipaddr/port tuple, but the ipaddr is the only
@@ -128,7 +130,7 @@ static int rds_iw_get_device(struct rds_
 			 * zero'ed.  It doesn't appear to be properly populated
 			 * during connection setup...
 			 */
-			if (src_addr->sin_addr.s_addr == rs->rs_bound_addr) {
+			if (src_addr->sin_addr.s_addr == src->sin_addr.s_addr) {
 #endif
 				spin_unlock_irq(&iwdev->spinlock);
 				*rds_iwdev = iwdev;
@@ -180,19 +182,13 @@ int rds_iw_update_cm_id(struct rds_iw_de
 {
 	struct sockaddr_in *src_addr, *dst_addr;
 	struct rds_iw_device *rds_iwdev_old;
-	struct rds_sock rs;
 	struct rdma_cm_id *pcm_id;
 	int rc;
 
 	src_addr = (struct sockaddr_in *)&cm_id->route.addr.src_addr;
 	dst_addr = (struct sockaddr_in *)&cm_id->route.addr.dst_addr;
 
-	rs.rs_bound_addr = src_addr->sin_addr.s_addr;
-	rs.rs_bound_port = src_addr->sin_port;
-	rs.rs_conn_addr = dst_addr->sin_addr.s_addr;
-	rs.rs_conn_port = dst_addr->sin_port;
-
-	rc = rds_iw_get_device(&rs, &rds_iwdev_old, &pcm_id);
+	rc = rds_iw_get_device(src_addr, dst_addr, &rds_iwdev_old, &pcm_id);
 	if (rc)
 		rds_iw_remove_cm_id(rds_iwdev, cm_id);
 
@@ -598,9 +594,17 @@ void *rds_iw_get_mr(struct scatterlist *
 	struct rds_iw_device *rds_iwdev;
 	struct rds_iw_mr *ibmr = NULL;
 	struct rdma_cm_id *cm_id;
+	struct sockaddr_in src = {
+		.sin_addr.s_addr = rs->rs_bound_addr,
+		.sin_port = rs->rs_bound_port,
+	};
+	struct sockaddr_in dst = {
+		.sin_addr.s_addr = rs->rs_conn_addr,
+		.sin_port = rs->rs_conn_port,
+	};
 	int ret;
 
-	ret = rds_iw_get_device(rs, &rds_iwdev, &cm_id);
+	ret = rds_iw_get_device(&src, &dst, &rds_iwdev, &cm_id);
 	if (ret || !cm_id) {
 		ret = -ENODEV;
 		goto out;

[PATCH 3.14 10/79] inet_diag: fix possible overflow in inet_diag_dump_one_icsk()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit c8e2c80d7ec00d020320f905822bf49c5ad85250 ]

inet_diag_dump_one_icsk() allocates too small skb.

Add inet_sk_attr_size() helper right before inet_sk_diag_fill()
so that it can be updated if/when new attributes are added.

iproute2/ss currently does not use this dump_one() interface,
this might explain nobody noticed this problem yet.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/inet_diag.c |   18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -71,6 +71,20 @@ static inline void inet_diag_unlock_hand
 	mutex_unlock(&inet_diag_table_mutex);
 }
 
+static size_t inet_sk_attr_size(void)
+{
+	return	  nla_total_size(sizeof(struct tcp_info))
+		+ nla_total_size(1) /* INET_DIAG_SHUTDOWN */
+		+ nla_total_size(1) /* INET_DIAG_TOS */
+		+ nla_total_size(1) /* INET_DIAG_TCLASS */
+		+ nla_total_size(sizeof(struct inet_diag_meminfo))
+		+ nla_total_size(sizeof(struct inet_diag_msg))
+		+ nla_total_size(SK_MEMINFO_VARS * sizeof(u32))
+		+ nla_total_size(TCP_CA_NAME_MAX)
+		+ nla_total_size(sizeof(struct tcpvegas_info))
+		+ 64;
+}
+
 int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk,
 			      struct sk_buff *skb, struct inet_diag_req_v2 *req,
 			      struct user_namespace *user_ns,		      	
@@ -324,9 +338,7 @@ int inet_diag_dump_one_icsk(struct inet_
 	if (err)
 		goto out;
 
-	rep = nlmsg_new(sizeof(struct inet_diag_msg) +
-			sizeof(struct inet_diag_meminfo) +
-			sizeof(struct tcp_info) + 64, GFP_KERNEL);
+	rep = nlmsg_new(inet_sk_attr_size(), GFP_KERNEL);
 	if (!rep) {
 		err = -ENOMEM;
 		goto out;

[PATCH 3.14 11/79] caif: fix MSG_OOB test in caif_seqpkt_recvmsg()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

[ Upstream commit 3eeff778e00c956875c70b145c52638c313dfb23 ]

It should be checking flags, not msg->msg_flags.  It's ->sendmsg()
instances that need to look for that in ->msg_flags, ->recvmsg() ones
(including the other ->recvmsg() instance in that file, as well as
unix_dgram_recvmsg() this one claims to be imitating) check in flags.
Braino had been introduced in commit dcda13 ("caif: Bugfix - use MSG_TRUNC
in receive") back in 2010, so it goes quite a while back.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/caif/caif_socket.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/caif/caif_socket.c
+++ b/net/caif/caif_socket.c
@@ -283,7 +283,7 @@ static int caif_seqpkt_recvmsg(struct ki
 	int copylen;
 
 	ret = -EOPNOTSUPP;
-	if (m->msg_flags&MSG_OOB)
+	if (flags & MSG_OOB)
 		goto read_error;
 
 	skb = skb_recv_datagram(sk, flags, 0 , &ret);

[PATCH 3.14 12/79] rxrpc: bogus MSG_PEEK test in rxrpc_recvmsg()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@ZenIV.linux.org.uk>

[ Upstream commit 7d985ed1dca5c90535d67ce92ef6ca520302340a ]

[I would really like an ACK on that one from dhowells; it appears to be
quite straightforward, but...]

MSG_PEEK isn't passed to ->recvmsg() via msg->msg_flags; as the matter of
fact, neither the kernel users of rxrpc, nor the syscalls ever set that bit
in there.  It gets passed via flags; in fact, another such check in the same
function is done correctly - as flags & MSG_PEEK.

It had been that way (effectively disabled) for 8 years, though, so the patch
needs beating up - that case had never been tested.  If it is correct, it's
-stable fodder.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/rxrpc/ar-recvmsg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -87,7 +87,7 @@ int rxrpc_recvmsg(struct kiocb *iocb, st
 		if (!skb) {
 			/* nothing remains on the queue */
 			if (copied &&
-			    (msg->msg_flags & MSG_PEEK || timeo == 0))
+			    (flags & MSG_PEEK || timeo == 0))
 				goto out;
 
 			/* wait for a message to turn up */

[PATCH 3.14 13/79] Revert "net: cx82310_eth: use common match macro"

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Zary <linux@rainbow-software.org>

[ Upstream commit 8d006e0105978619fb472e150c88b0d49337fe2b ]

This reverts commit 11ad714b98f6d9ca0067568442afe3e70eb94845 because
it breaks cx82310_eth.

The custom USB_DEVICE_CLASS macro matches
bDeviceClass, bDeviceSubClass and bDeviceProtocol
but the common USB_DEVICE_AND_INTERFACE_INFO matches
bInterfaceClass, bInterfaceSubClass and bInterfaceProtocol instead, which are
not specified.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/cx82310_eth.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/net/usb/cx82310_eth.c
+++ b/drivers/net/usb/cx82310_eth.c
@@ -300,9 +300,18 @@ static const struct driver_info	cx82310_
 	.tx_fixup	= cx82310_tx_fixup,
 };
 
+#define USB_DEVICE_CLASS(vend, prod, cl, sc, pr) \
+	.match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+		       USB_DEVICE_ID_MATCH_DEV_INFO, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bDeviceClass = (cl), \
+	.bDeviceSubClass = (sc), \
+	.bDeviceProtocol = (pr)
+
 static const struct usb_device_id products[] = {
 	{
-		USB_DEVICE_AND_INTERFACE_INFO(0x0572, 0xcb01, 0xff, 0, 0),
+		USB_DEVICE_CLASS(0x0572, 0xcb01, 0xff, 0, 0),
 		.driver_info = (unsigned long) &cx82310_info
 	},
 	{ },

[PATCH 3.14 14/79] ipv6: fix backtracking for throw routes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Barth <cyrus@openwrt.org>

[ Upstream commit 73ba57bfae4a1914f6a6dac71e3168dd900e00af ]

for throw routes to trigger evaluation of other policy rules
EAGAIN needs to be propagated up to fib_rules_lookup
similar to how its done for IPv4

A simple testcase for verification is:

ip -6 rule add lookup 33333 priority 33333
ip -6 route add throw 2001:db8::1
ip -6 route add 2001:db8::1 via fe80::1 dev wlan0 table 33333
ip route get 2001:db8::1

Signed-off-by: Steven Barth <cyrus@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/fib6_rules.c |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv6/fib6_rules.c
+++ b/net/ipv6/fib6_rules.c
@@ -104,6 +104,7 @@ static int fib6_rule_action(struct fib_r
 				goto again;
 			flp6->saddr = saddr;
 		}
+		err = rt->dst.error;
 		goto out;
 	}
 again:

[PATCH 3.14 15/79] tcp: fix tcp fin memory accounting

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Josh Hunt <johunt@akamai.com>

[ Upstream commit d22e1537181188e5dc8cbc51451832625035bdc2 ]

tcp_send_fin() does not account for the memory it allocates properly, so
sk_forward_alloc can be negative in cases where we've sent a FIN:

ss example output (ss -amn | grep -B1 f4294):
tcp    FIN-WAIT-1 0      1            192.168.0.1:45520         192.0.2.1:8080
	skmem:(r0,rb87380,t0,tb87380,f4294966016,w1280,o0,bl0)
Acked-by: Eric Dumazet <edumazet@google.com>

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2617,15 +2617,11 @@ void tcp_send_fin(struct sock *sk)
 	} else {
 		/* Socket is locked, keep trying until memory is available. */
 		for (;;) {
-			skb = alloc_skb_fclone(MAX_TCP_HEADER,
-					       sk->sk_allocation);
+			skb = sk_stream_alloc_skb(sk, 0, sk->sk_allocation);
 			if (skb)
 				break;
 			yield();
 		}
-
-		/* Reserve space for headers and prepare control bits. */
-		skb_reserve(skb, MAX_TCP_HEADER);
 		/* FIN eats a sequence byte, write_seq advanced by tcp_queue_skb(). */
 		tcp_init_nondata_skb(skb, tp->write_seq,
 				     TCPHDR_ACK | TCPHDR_FIN);

[PATCH 3.14 16/79] net: compat: Update get_compat_msghdr() to match copy_msghdr_from_user() behaviour

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Catalin Marinas <catalin.marinas@arm.com>

[ Upstream commit 91edd096e224941131f896b86838b1e59553696a ]

Commit db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an
error) introduced the clamping of msg_namelen when the unsigned value
was larger than sizeof(struct sockaddr_storage). This caused a
msg_namelen of -1 to be valid. The native code was subsequently fixed by
commit dbb490b96584 (net: socket: error on a negative msg_namelen).

In addition, the native code sets msg_namelen to 0 when msg_name is
NULL. This was done in commit (6a2a2b3ae075 net:socket: set msg_namelen
to 0 if msg_name is passed as NULL in msghdr struct from userland) and
subsequently updated by 08adb7dabd48 (fold verify_iovec() into
copy_msghdr_from_user()).

This patch brings the get_compat_msghdr() in line with
copy_msghdr_from_user().

Fixes: db31c55a6fb2 (net: clamp ->msg_namelen instead of returning an error)
Cc: David S. Miller <davem@davemloft.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/compat.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/compat.c
+++ b/net/compat.c
@@ -71,6 +71,13 @@ int get_compat_msghdr(struct msghdr *kms
 	    __get_user(kmsg->msg_controllen, &umsg->msg_controllen) ||
 	    __get_user(kmsg->msg_flags, &umsg->msg_flags))
 		return -EFAULT;
+
+	if (!tmp1)
+		kmsg->msg_namelen = 0;
+
+	if (kmsg->msg_namelen < 0)
+		return -EINVAL;
+
 	if (kmsg->msg_namelen > sizeof(struct sockaddr_storage))
 		kmsg->msg_namelen = sizeof(struct sockaddr_storage);
 	kmsg->msg_name = compat_ptr(tmp1);

[PATCH 3.14 17/79] tcp: make connect() mem charging friendly

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 355a901e6cf1b2b763ec85caa2a9f04fbcc4ab4a ]

While working on sk_forward_alloc problems reported by Denys
Fedoryshchenko, we found that tcp connect() (and fastopen) do not call
sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so
sk_forward_alloc is negative while connect is in progress.

We can fix this by calling regular sk_stream_alloc_skb() both for the
SYN packet (in tcp_connect()) and the syn_data packet in
tcp_send_syn_data()

Then, tcp_send_syn_data() can avoid copying syn_data as we simply
can manipulate syn_data->cb[] to remove SYN flag (and increment seq)

Instead of open coding memcpy_fromiovecend(), simply use this helper.

This leaves in socket write queue clean fast clone skbs.

This was tested against our fastopen packetdrill tests.

Reported-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/tcp_output.c |   66 +++++++++++++++++++++-----------------------------
 1 file changed, 29 insertions(+), 37 deletions(-)

--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -2895,9 +2895,9 @@ static int tcp_send_syn_data(struct sock
 {
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct tcp_fastopen_request *fo = tp->fastopen_req;
-	int syn_loss = 0, space, i, err = 0, iovlen = fo->data->msg_iovlen;
-	struct sk_buff *syn_data = NULL, *data;
+	int syn_loss = 0, space, err = 0;
 	unsigned long last_syn_loss = 0;
+	struct sk_buff *syn_data;
 
 	tp->rx_opt.mss_clamp = tp->advmss;  /* If MSS is not cached */
 	tcp_fastopen_cache_get(sk, &tp->rx_opt.mss_clamp, &fo->cookie,
@@ -2928,42 +2928,38 @@ static int tcp_send_syn_data(struct sock
 	/* limit to order-0 allocations */
 	space = min_t(size_t, space, SKB_MAX_HEAD(MAX_TCP_HEADER));
 
-	syn_data = skb_copy_expand(syn, MAX_TCP_HEADER, space,
-				   sk->sk_allocation);
-	if (syn_data == NULL)
+	syn_data = sk_stream_alloc_skb(sk, space, sk->sk_allocation);
+	if (!syn_data)
 		goto fallback;
-
-	for (i = 0; i < iovlen && syn_data->len < space; ++i) {
-		struct iovec *iov = &fo->data->msg_iov[i];
-		unsigned char __user *from = iov->iov_base;
-		int len = iov->iov_len;
-
-		if (syn_data->len + len > space)
-			len = space - syn_data->len;
-		else if (i + 1 == iovlen)
-			/* No more data pending in inet_wait_for_connect() */
-			fo->data = NULL;
-
-		if (skb_add_data(syn_data, from, len))
-			goto fallback;
-	}
-
-	/* Queue a data-only packet after the regular SYN for retransmission */
-	data = pskb_copy(syn_data, sk->sk_allocation);
-	if (data == NULL)
+	syn_data->ip_summed = CHECKSUM_PARTIAL;
+	memcpy(syn_data->cb, syn->cb, sizeof(syn->cb));
+	if (unlikely(memcpy_fromiovecend(skb_put(syn_data, space),
+					 fo->data->msg_iov, 0, space))) {
+		kfree_skb(syn_data);
 		goto fallback;
-	TCP_SKB_CB(data)->seq++;
-	TCP_SKB_CB(data)->tcp_flags &= ~TCPHDR_SYN;
-	TCP_SKB_CB(data)->tcp_flags = (TCPHDR_ACK|TCPHDR_PSH);
-	tcp_connect_queue_skb(sk, data);
-	fo->copied = data->len;
+	}
 
-	if (tcp_transmit_skb(sk, syn_data, 0, sk->sk_allocation) == 0) {
+	/* No more data pending in inet_wait_for_connect() */
+	if (space == fo->size)
+		fo->data = NULL;
+	fo->copied = space;
+
+	tcp_connect_queue_skb(sk, syn_data);
+
+	err = tcp_transmit_skb(sk, syn_data, 1, sk->sk_allocation);
+
+	/* Now full SYN+DATA was cloned and sent (or not),
+	 * remove the SYN from the original skb (syn_data)
+	 * we keep in write queue in case of a retransmit, as we
+	 * also have the SYN packet (with no data) in the same queue.
+	 */
+	TCP_SKB_CB(syn_data)->seq++;
+	TCP_SKB_CB(syn_data)->tcp_flags = TCPHDR_ACK | TCPHDR_PSH;
+	if (!err) {
 		tp->syn_data = (fo->copied > 0);
 		NET_INC_STATS(sock_net(sk), LINUX_MIB_TCPFASTOPENACTIVE);
 		goto done;
 	}
-	syn_data = NULL;
 
 fallback:
 	/* Send a regular SYN with Fast Open cookie request option */
@@ -2972,7 +2968,6 @@ fallback:
 	err = tcp_transmit_skb(sk, syn, 1, sk->sk_allocation);
 	if (err)
 		tp->syn_fastopen = 0;
-	kfree_skb(syn_data);
 done:
 	fo->cookie.len = -1;  /* Exclude Fast Open option for SYN retries */
 	return err;
@@ -2992,13 +2987,10 @@ int tcp_connect(struct sock *sk)
 		return 0;
 	}
 
-	buff = alloc_skb_fclone(MAX_TCP_HEADER + 15, sk->sk_allocation);
-	if (unlikely(buff == NULL))
+	buff = sk_stream_alloc_skb(sk, 0, sk->sk_allocation);
+	if (unlikely(!buff))
 		return -ENOBUFS;
 
-	/* Reserve space for headers. */
-	skb_reserve(buff, MAX_TCP_HEADER);
-
 	tcp_init_nondata_skb(buff, tp->write_seq++, TCPHDR_SYN);
 	tp->retrans_stamp = TCP_SKB_CB(buff)->when = tcp_time_stamp;
 	tcp_connect_queue_skb(sk, buff);

[PATCH 3.14 19/79] drm/radeon: do a posting read in evergreen_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit c320bb5f6dc0cb88a811cbaf839303e0a3916a92 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/evergreen.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -4596,6 +4596,9 @@ int evergreen_irq_set(struct radeon_devi
 	WREG32(AFMT_AUDIO_PACKET_CONTROL + EVERGREEN_CRTC4_REGISTER_OFFSET, afmt5);
 	WREG32(AFMT_AUDIO_PACKET_CONTROL + EVERGREEN_CRTC5_REGISTER_OFFSET, afmt6);
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 

[PATCH 3.14 20/79] drm/radeon: do a posting read in r100_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit f957063fee6392bb9365370db6db74dc0b2dce0a upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/r100.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -742,6 +742,10 @@ int r100_irq_set(struct radeon_device *r
 		tmp |= RADEON_FP2_DETECT_MASK;
 	}
 	WREG32(RADEON_GEN_INT_CNTL, tmp);
+
+	/* read back to post the write */
+	RREG32(RADEON_GEN_INT_CNTL);
+
 	return 0;
 }
 

[PATCH 3.14 21/79] drm/radeon: do a posting read in r600_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 9d1393f23d5656cdd5f368efd60694d4aeed81d3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/r600.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -3647,6 +3647,9 @@ int r600_irq_set(struct radeon_device *r
 		WREG32(RV770_CG_THERMAL_INT, thermal_int);
 	}
 
+	/* posting read */
+	RREG32(R_000E50_SRBM_STATUS);
+
 	return 0;
 }
 

[PATCH 3.14 22/79] drm/radeon: do a posting read in cik_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit cffefd9bb31cd35ab745d3b49005d10616d25bdc upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/cik.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -7069,6 +7069,9 @@ int cik_irq_set(struct radeon_device *rd
 	WREG32(DC_HPD5_INT_CONTROL, hpd5);
 	WREG32(DC_HPD6_INT_CONTROL, hpd6);
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 

[PATCH 3.14 23/79] drm/radeon: do a posting read in si_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 0586915ec10d0ae60de5cd3381ad25a704760402 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/si.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -5958,6 +5958,9 @@ int si_irq_set(struct radeon_device *rde
 
 	WREG32(CG_THERMAL_INT, thermal_int);
 
+	/* posting read */
+	RREG32(SRBM_STATUS);
+
 	return 0;
 }
 

[PATCH 3.14 24/79] drm/radeon: do a posting read in rs600_set_irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 54acf107e4e66d1f4a697e08a7f60dba9fcf07c3 upstream.

To make sure the writes go through the pci bridge.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=90741

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/rs600.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -700,6 +700,10 @@ int rs600_irq_set(struct radeon_device *
 	WREG32(R_007D18_DC_HOT_PLUG_DETECT2_INT_CONTROL, hpd2);
 	if (ASIC_IS_DCE2(rdev))
 		WREG32(R_007408_HDMI0_AUDIO_PACKET_CONTROL, hdmi0);
+
+	/* posting read */
+	RREG32(R_000040_GEN_INT_CNTL);
+
 	return 0;
 }
 

[PATCH 3.14 25/79] drm/radeon: fix interlaced modes on DCE8

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 77ae5f4b48a0445426c9c1ef7c0f28b717e35d55 upstream.

Need to double the viewport height.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/atombios_crtc.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -1306,6 +1306,9 @@ static int dce4_crtc_do_set_base(struct
 	       (x << 16) | y);
 	viewport_w = crtc->mode.hdisplay;
 	viewport_h = (crtc->mode.vdisplay + 1) & ~1;
+	if ((rdev->family >= CHIP_BONAIRE) &&
+	    (crtc->mode.flags & DRM_MODE_FLAG_INTERLACE))
+		viewport_h *= 2;
 	WREG32(EVERGREEN_VIEWPORT_SIZE + radeon_crtc->crtc_offset,
 	       (viewport_w << 16) | viewport_h);
 

[PATCH 3.14 27/79] LZ4 : fix the data abort issue

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: JeHyeon Yeon <tom.yeon@windriver.com>

commit d5e7cafd69da24e6d6cc988fab6ea313a2577efc upstream.

If the part of the compression data are corrupted, or the compression
data is totally fake, the memory access over the limit is possible.

This is the log from my system usning lz4 decompression.
   [6502]data abort, halting
   [6503]r0  0x00000000 r1  0x00000000 r2  0xdcea0ffc r3  0xdcea0ffc
   [6509]r4  0xb9ab0bfd r5  0xdcea0ffc r6  0xdcea0ff8 r7  0xdce80000
   [6515]r8  0x00000000 r9  0x00000000 r10 0x00000000 r11 0xb9a98000
   [6522]r12 0xdcea1000 usp 0x00000000 ulr 0x00000000 pc  0x820149bc
   [6528]spsr 0x400001f3
and the memory addresses of some variables at the moment are
    ref:0xdcea0ffc, op:0xdcea0ffc, oend:0xdcea1000

As you can see, COPYLENGH is 8bytes, so @ref and @op can access the momory
over @oend.

Signed-off-by: JeHyeon Yeon <tom.yeon@windriver.com>
Reviewed-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/lz4/lz4_decompress.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/lib/lz4/lz4_decompress.c
+++ b/lib/lz4/lz4_decompress.c
@@ -139,6 +139,9 @@ static int lz4_uncompress(const char *so
 			/* Error: request to write beyond destination buffer */
 			if (cpy > oend)
 				goto _output_error;
+			if ((ref + COPYLENGTH) > oend ||
+					(op + COPYLENGTH) > oend)
+				goto _output_error;
 			LZ4_SECURECOPY(ref, op, (oend - COPYLENGTH));
 			while (op < cpy)
 				*op++ = *ref++;

[PATCH 3.14 28/79] fuse: set stolen page uptodate

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit aa991b3b267e24f578bac7b09cc57579b660304b upstream.

Regular pipe buffers' ->steal method (generic_pipe_buf_steal()) doesn't set
PG_uptodate.

Don't warn on this condition, just set the uptodate flag.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/dev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -819,8 +819,8 @@ static int fuse_try_move_page(struct fus
 
 	newpage = buf->page;
 
-	if (WARN_ON(!PageUptodate(newpage)))
-		return -EIO;
+	if (!PageUptodate(newpage))
+		SetPageUptodate(newpage);
 
 	ClearPageMappedToDisk(newpage);
 

[PATCH 3.14 29/79] fuse: notify: dont move pages

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit 0d2783626a53d4c922f82d51fa675cb5d13f0d36 upstream.

fuse_try_move_page() is not prepared for replacing pages that have already
been read.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/dev.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1726,6 +1726,9 @@ copy_finish:
 static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code,
 		       unsigned int size, struct fuse_copy_state *cs)
 {
+	/* Don't try to move pages (yet) */
+	cs->move_pages = 0;
+
 	switch (code) {
 	case FUSE_NOTIFY_POLL:
 		return fuse_notify_poll(fc, size, cs);

[PATCH 3.14 30/79] console: Fix console name size mismatch

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Hurley <peter@hurleysoftware.com>

commit 30a22c215a0007603ffc08021f2e8b64018517dd upstream.

commit 6ae9200f2cab7 ("enlarge console.name") increased the storage
for the console name to 16 bytes, but not the corresponding
struct console_cmdline::name storage. Console names longer than
8 bytes cause read beyond end-of-string and failure to match
console; I'm not sure if there are other unexpected consequences.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/printk/console_cmdline.h |    2 +-
 kernel/printk/printk.c          |    1 +
 2 files changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/printk/console_cmdline.h
+++ b/kernel/printk/console_cmdline.h
@@ -3,7 +3,7 @@
 
 struct console_cmdline
 {
-	char	name[8];			/* Name of the driver	    */
+	char	name[16];			/* Name of the driver	    */
 	int	index;				/* Minor dev. to use	    */
 	char	*options;			/* Options for the driver   */
 #ifdef CONFIG_A11Y_BRAILLE_CONSOLE
--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2280,6 +2280,7 @@ void register_console(struct console *ne
 	for (i = 0, c = console_cmdline;
 	     i < MAX_CMDLINECONSOLES && c->name[0];
 	     i++, c++) {
+		BUILD_BUG_ON(sizeof(c->name) != sizeof(newcon->name));
 		if (strcmp(c->name, newcon->name) != 0)
 			continue;
 		if (newcon->index >= 0 &&

[PATCH 3.14 31/79] virtio_console: init work unconditionally

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael S. Tsirkin" <mst@redhat.com>

commit 4f6e24ed9de8634d6471ef86b382cba6d4e57ca8 upstream.

when multiport is off, we don't initialize config work,
but we then cancel uninitialized control_work on freeze.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -2024,12 +2024,13 @@ static int virtcons_probe(struct virtio_
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);
 
+	INIT_WORK(&portdev->control_work, &control_work_handler);
+
 	if (multiport) {
 		unsigned int nr_added_bufs;
 
 		spin_lock_init(&portdev->c_ivq_lock);
 		spin_lock_init(&portdev->c_ovq_lock);
-		INIT_WORK(&portdev->control_work, &control_work_handler);
 
 		nr_added_bufs = fill_queue(portdev->c_ivq,
 					   &portdev->c_ivq_lock);

[PATCH 3.14 32/79] virtio_console: avoid config access from irq

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael S. Tsirkin" <mst@redhat.com>

commit eeb8a7e8bb123e84daeef84f5a2eab99ad2839a2 upstream.

when multiport is off, virtio console invokes config access from irq
context, config access is blocking on s390.
Fix this up by scheduling work from config irq - similar to what we do
for multiport configs.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/virtio_console.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -142,6 +142,7 @@ struct ports_device {
 	 * notification
 	 */
 	struct work_struct control_work;
+	struct work_struct config_work;
 
 	struct list_head ports;
 
@@ -1832,10 +1833,21 @@ static void config_intr(struct virtio_de
 
 	portdev = vdev->priv;
 
+	if (!use_multiport(portdev))
+		schedule_work(&portdev->config_work);
+}
+
+static void config_work_handler(struct work_struct *work)
+{
+	struct ports_device *portdev;
+
+	portdev = container_of(work, struct ports_device, control_work);
 	if (!use_multiport(portdev)) {
+		struct virtio_device *vdev;
 		struct port *port;
 		u16 rows, cols;
 
+		vdev = portdev->vdev;
 		virtio_cread(vdev, struct virtio_console_config, cols, &cols);
 		virtio_cread(vdev, struct virtio_console_config, rows, &rows);
 
@@ -2024,6 +2036,7 @@ static int virtcons_probe(struct virtio_
 	spin_lock_init(&portdev->ports_lock);
 	INIT_LIST_HEAD(&portdev->ports);
 
+	INIT_WORK(&portdev->config_work, &config_work_handler);
 	INIT_WORK(&portdev->control_work, &control_work_handler);
 
 	if (multiport) {
@@ -2098,6 +2111,8 @@ static void virtcons_remove(struct virti
 	/* Finish up work that's lined up */
 	if (use_multiport(portdev))
 		cancel_work_sync(&portdev->control_work);
+	else
+		cancel_work_sync(&portdev->config_work);
 
 	list_for_each_entry_safe(port, port2, &portdev->ports, list)
 		unplug_port(port);
@@ -2149,6 +2164,7 @@ static int virtcons_freeze(struct virtio
 
 	virtqueue_disable_cb(portdev->c_ivq);
 	cancel_work_sync(&portdev->control_work);
+	cancel_work_sync(&portdev->config_work);
 	/*
 	 * Once more: if control_work_handler() was running, it would
 	 * enable the cb as the last step.

[PATCH 3.14 33/79] Change email address for 8250_pci

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@arm.linux.org.uk>

commit f2e0ea861117bda073d1d7ffbd3120c07c0d5d34 upstream.

I'm still receiving reports to my email address, so let's point this
at the linux-serial mailing list instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -66,7 +66,7 @@ static void moan_device(const char *str,
 	       "Please send the output of lspci -vv, this\n"
 	       "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
 	       "manufacturer and name of serial board or\n"
-	       "modem board to rmk+serial@arm.linux.org.uk.\n",
+	       "modem board to <linux-serial@vger.kernel.org>.\n",
 	       pci_name(dev), str, dev->vendor, dev->device,
 	       dev->subsystem_vendor, dev->subsystem_device);
 }

[PATCH 3.14 34/79] can: add missing initialisations in CAN related skbuffs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 969439016d2cf61fef53a973d7e6d2061c3793b1 upstream.

When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient
this can lead to a skb_under_panic due to missing skb initialisations.

Add the missing initialisations at the CAN skbuff creation times on driver
level (rx path) and in the network layer (tx path).

Reported-by: Austin Schuh <austin@peloton-tech.com>
Reported-by: Daniel Steer <daniel.steer@mclaren.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/dev.c |    8 ++++++++
 net/can/af_can.c      |    3 +++
 2 files changed, 11 insertions(+)

--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -502,6 +502,14 @@ struct sk_buff *alloc_can_skb(struct net
 	skb->pkt_type = PACKET_BROADCAST;
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
+
+	skb_reset_mac_header(skb);
+	skb_reset_network_header(skb);
+	skb_reset_transport_header(skb);
+
 	can_skb_reserve(skb);
 	can_skb_prv(skb)->ifindex = dev->ifindex;
 
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -262,6 +262,9 @@ int can_send(struct sk_buff *skb, int lo
 		goto inval_skb;
 	}
 
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+	skb_reset_mac_header(skb);
 	skb_reset_network_header(skb);
 	skb_reset_transport_header(skb);
 

[PATCH 3.14 35/79] workqueue: fix hang involving racing cancel[_delayed]_work_sync()s for PREEMPT_NONE

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 8603e1b30027f943cc9c1eef2b291d42c3347af1 upstream.

cancel[_delayed]_work_sync() are implemented using
__cancel_work_timer() which grabs the PENDING bit using
try_to_grab_pending() and then flushes the work item with PENDING set
to prevent the on-going execution of the work item from requeueing
itself.

try_to_grab_pending() can always grab PENDING bit without blocking
except when someone else is doing the above flushing during
cancelation.  In that case, try_to_grab_pending() returns -ENOENT.  In
this case, __cancel_work_timer() currently invokes flush_work().  The
assumption is that the completion of the work item is what the other
canceling task would be waiting for too and thus waiting for the same
condition and retrying should allow forward progress without excessive
busy looping

Unfortunately, this doesn't work if preemption is disabled or the
latter task has real time priority.  Let's say task A just got woken
up from flush_work() by the completion of the target work item.  If,
before task A starts executing, task B gets scheduled and invokes
__cancel_work_timer() on the same work item, its try_to_grab_pending()
will return -ENOENT as the work item is still being canceled by task A
and flush_work() will also immediately return false as the work item
is no longer executing.  This puts task B in a busy loop possibly
preventing task A from executing and clearing the canceling state on
the work item leading to a hang.

task A			task B			worker

						executing work
__cancel_work_timer()
  try_to_grab_pending()
  set work CANCELING
  flush_work()
    block for work completion
						completion, wakes up A
			__cancel_work_timer()
			while (forever) {
			  try_to_grab_pending()
			    -ENOENT as work is being canceled
			  flush_work()
			    false as work is no longer executing
			}

This patch removes the possible hang by updating __cancel_work_timer()
to explicitly wait for clearing of CANCELING rather than invoking
flush_work() after try_to_grab_pending() fails with -ENOENT.

Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com

v3: bit_waitqueue() can't be used for work items defined in vmalloc
    area.  Switched to custom wake function which matches the target
    work item and exclusive wait and wakeup.

v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if
    the target bit waitqueue has wait_bit_queue's on it.  Use
    DEFINE_WAIT_BIT() and __wake_up_bit() instead.  Reported by Tomeu
    Vizoso.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com>
Tested-by: Jesper Nilsson <jesper.nilsson@axis.com>
Tested-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/workqueue.h |    3 +-
 kernel/workqueue.c        |   56 ++++++++++++++++++++++++++++++++++++++++++----
 2 files changed, 54 insertions(+), 5 deletions(-)

--- a/include/linux/workqueue.h
+++ b/include/linux/workqueue.h
@@ -71,7 +71,8 @@ enum {
 	/* data contains off-queue information when !WORK_STRUCT_PWQ */
 	WORK_OFFQ_FLAG_BASE	= WORK_STRUCT_COLOR_SHIFT,
 
-	WORK_OFFQ_CANCELING	= (1 << WORK_OFFQ_FLAG_BASE),
+	__WORK_OFFQ_CANCELING	= WORK_OFFQ_FLAG_BASE,
+	WORK_OFFQ_CANCELING	= (1 << __WORK_OFFQ_CANCELING),
 
 	/*
 	 * When a work item is off queue, its high bits point to the last
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2893,19 +2893,57 @@ bool flush_work(struct work_struct *work
 }
 EXPORT_SYMBOL_GPL(flush_work);
 
+struct cwt_wait {
+	wait_queue_t		wait;
+	struct work_struct	*work;
+};
+
+static int cwt_wakefn(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+	struct cwt_wait *cwait = container_of(wait, struct cwt_wait, wait);
+
+	if (cwait->work != key)
+		return 0;
+	return autoremove_wake_function(wait, mode, sync, key);
+}
+
 static bool __cancel_work_timer(struct work_struct *work, bool is_dwork)
 {
+	static DECLARE_WAIT_QUEUE_HEAD(cancel_waitq);
 	unsigned long flags;
 	int ret;
 
 	do {
 		ret = try_to_grab_pending(work, is_dwork, &flags);
 		/*
-		 * If someone else is canceling, wait for the same event it
-		 * would be waiting for before retrying.
+		 * If someone else is already canceling, wait for it to
+		 * finish.  flush_work() doesn't work for PREEMPT_NONE
+		 * because we may get scheduled between @work's completion
+		 * and the other canceling task resuming and clearing
+		 * CANCELING - flush_work() will return false immediately
+		 * as @work is no longer busy, try_to_grab_pending() will
+		 * return -ENOENT as @work is still being canceled and the
+		 * other canceling task won't be able to clear CANCELING as
+		 * we're hogging the CPU.
+		 *
+		 * Let's wait for completion using a waitqueue.  As this
+		 * may lead to the thundering herd problem, use a custom
+		 * wake function which matches @work along with exclusive
+		 * wait and wakeup.
 		 */
-		if (unlikely(ret == -ENOENT))
-			flush_work(work);
+		if (unlikely(ret == -ENOENT)) {
+			struct cwt_wait cwait;
+
+			init_wait(&cwait.wait);
+			cwait.wait.func = cwt_wakefn;
+			cwait.work = work;
+
+			prepare_to_wait_exclusive(&cancel_waitq, &cwait.wait,
+						  TASK_UNINTERRUPTIBLE);
+			if (work_is_canceling(work))
+				schedule();
+			finish_wait(&cancel_waitq, &cwait.wait);
+		}
 	} while (unlikely(ret < 0));
 
 	/* tell other tasks trying to grab @work to back off */
@@ -2914,6 +2952,16 @@ static bool __cancel_work_timer(struct w
 
 	flush_work(work);
 	clear_work_data(work);
+
+	/*
+	 * Paired with prepare_to_wait() above so that either
+	 * waitqueue_active() is visible here or !work_is_canceling() is
+	 * visible there.
+	 */
+	smp_mb();
+	if (waitqueue_active(&cancel_waitq))
+		__wake_up(&cancel_waitq, TASK_NORMAL, 1, work);
+
 	return ret;
 }
 

[PATCH 3.14 36/79] cpuset: Fix cpuset sched_relax_domain_level

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Low <jason.low2@hp.com>

commit 283cb41f426b723a0255702b761b0fc5d1b53a81 upstream.

The cpuset.sched_relax_domain_level can control how far we do
immediate load balancing on a system. However, it was found on recent
kernels that echo'ing a value into cpuset.sched_relax_domain_level
did not reduce any immediate load balancing.

The reason this occurred was because the update_domain_attr_tree() traversal
did not update for the "top_cpuset". This resulted in nothing being changed
when modifying the sched_relax_domain_level parameter.

This patch is able to address that problem by having update_domain_attr_tree()
allow updates for the root in the cpuset traversal.

Fixes: fc560a26acce ("cpuset: replace cpuset->stack_list with cpuset_for_each_descendant_pre()")
Signed-off-by: Jason Low <jason.low2@hp.com>
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Tested-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpuset.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -503,9 +503,6 @@ static void update_domain_attr_tree(stru
 
 	rcu_read_lock();
 	cpuset_for_each_descendant_pre(cp, pos_css, root_cs) {
-		if (cp == root_cs)
-			continue;
-
 		/* skip the whole subtree if @cp doesn't have any CPU */
 		if (cpumask_empty(cp->cpus_allowed)) {
 			pos_css = css_rightmost_descendant(pos_css);

[PATCH 3.14 37/79] tpm/ibmvtpm: Additional LE support for tpm_ibmvtpm_send

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "jmlatten@linux.vnet.ibm.com" <jmlatten@linux.vnet.ibm.com>

commit 62dfd912ab3b5405b6fe72d0135c37e9648071f1 upstream.

Problem: When IMA and VTPM are both enabled in kernel config,
kernel hangs during bootup on LE OS.

Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send
and tpm_ibmtpm_recv getting called. A trace showed that
tpm_ibmtpm_recv was hanging.

Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send
was sending CRQ message that probably did not make much sense
to phype because of Endianness. The fix below sends correctly
converted CRQ for LE. This was not caught before because it
seems IMA is not enabled by default in kernel config and
IMA exercises this particular code path in vtpm.

Tested with IMA and VTPM enabled in kernel config and VTPM
enabled on both a BE OS and a LE OS ppc64 lpar. This exercised
CRQ and TPM command code paths in vtpm.
Patch is against Peter's tpmdd tree on github which included
Vicky's previous vtpm le patches.

Signed-off-by: Joy Latten <jmlatten@linux.vnet.ibm.com>
Reviewed-by: Ashley Lai <ashley@ahsleylai.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm_ibmvtpm.c |   10 +++++-----
 drivers/char/tpm/tpm_ibmvtpm.h |    6 +++---
 2 files changed, 8 insertions(+), 8 deletions(-)

--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -124,7 +124,7 @@ static int tpm_ibmvtpm_send(struct tpm_c
 {
 	struct ibmvtpm_dev *ibmvtpm;
 	struct ibmvtpm_crq crq;
-	u64 *word = (u64 *) &crq;
+	__be64 *word = (__be64 *)&crq;
 	int rc;
 
 	ibmvtpm = (struct ibmvtpm_dev *)TPM_VPRIV(chip);
@@ -145,11 +145,11 @@ static int tpm_ibmvtpm_send(struct tpm_c
 	memcpy((void *)ibmvtpm->rtce_buf, (void *)buf, count);
 	crq.valid = (u8)IBMVTPM_VALID_CMD;
 	crq.msg = (u8)VTPM_TPM_COMMAND;
-	crq.len = (u16)count;
-	crq.data = ibmvtpm->rtce_dma_handle;
+	crq.len = cpu_to_be16(count);
+	crq.data = cpu_to_be32(ibmvtpm->rtce_dma_handle);
 
-	rc = ibmvtpm_send_crq(ibmvtpm->vdev, cpu_to_be64(word[0]),
-			      cpu_to_be64(word[1]));
+	rc = ibmvtpm_send_crq(ibmvtpm->vdev, be64_to_cpu(word[0]),
+			      be64_to_cpu(word[1]));
 	if (rc != H_SUCCESS) {
 		dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
 		rc = 0;
--- a/drivers/char/tpm/tpm_ibmvtpm.h
+++ b/drivers/char/tpm/tpm_ibmvtpm.h
@@ -22,9 +22,9 @@
 struct ibmvtpm_crq {
 	u8 valid;
 	u8 msg;
-	u16 len;
-	u32 data;
-	u64 reserved;
+	__be16 len;
+	__be32 data;
+	__be64 reserved;
 } __attribute__((packed, aligned(8)));
 
 struct ibmvtpm_crq_queue {

[PATCH 3.14 38/79] spi: atmel: Fix interrupt setup for PDC transfers

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Torsten Fleischer <torfl6749@gmail.com>

commit 76e1d14b316d6f501ebc001e7a5d86b24ce5b615 upstream.

Additionally to the current DMA transfer the PDC allows to set up a next DMA
transfer. This is useful for larger SPI transfers.

The driver currently waits for ENDRX as end of the transfer. But ENDRX is set
when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the
next DMA transfer.
Thus a subsequent SPI transfer could be started although there is currently a
transfer in progress. This can cause invalid accesses to the SPI slave devices
and to SPI transfer errors.

This issue has been observed on a hardware with a M25P128 SPI NOR flash.

So instead of ENDRX we should wait for RXBUFF. This flag is set if there is
no more DMA transfer in progress (RCR = RNCR = 0).

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-atmel.c |   12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -781,17 +781,17 @@ static void atmel_spi_pdc_next_xfer(stru
 			(unsigned long long)xfer->rx_dma);
 	}
 
-	/* REVISIT: We're waiting for ENDRX before we start the next
+	/* REVISIT: We're waiting for RXBUFF before we start the next
 	 * transfer because we need to handle some difficult timing
-	 * issues otherwise. If we wait for ENDTX in one transfer and
-	 * then starts waiting for ENDRX in the next, it's difficult
-	 * to tell the difference between the ENDRX interrupt we're
-	 * actually waiting for and the ENDRX interrupt of the
+	 * issues otherwise. If we wait for TXBUFE in one transfer and
+	 * then starts waiting for RXBUFF in the next, it's difficult
+	 * to tell the difference between the RXBUFF interrupt we're
+	 * actually waiting for and the RXBUFF interrupt of the
 	 * previous transfer.
 	 *
 	 * It should be doable, though. Just not now...
 	 */
-	spi_writel(as, IER, SPI_BIT(ENDRX) | SPI_BIT(OVRES));
+	spi_writel(as, IER, SPI_BIT(RXBUFF) | SPI_BIT(OVRES));
 	spi_writel(as, PTCR, SPI_BIT(TXTEN) | SPI_BIT(RXTEN));
 }
 

[PATCH 3.14 39/79] spi: pl022: Fix race in giveback() leading to driver lock-up

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Sverdlin <alexander.sverdlin@nokia.com>

commit cd6fa8d2ca53cac3226fdcffcf763be390abae32 upstream.

Commit fd316941c ("spi/pl022: disable port when unused") introduced a race,
which leads to possible driver lock up (easily reproducible on SMP).

The problem happens in giveback() function where the completion of the transfer
is signalled to SPI subsystem and then the HW SPI controller is disabled. Another
transfer might be setup in between, which brings driver in locked-up state.

Exact event sequence on SMP:

core0                                   core1

                                        => pump_transfers()
                                        /* message->state == STATE_DONE */
                                          => giveback()
                                            => spi_finalize_current_message()

=> pl022_unprepare_transfer_hardware()
=> pl022_transfer_one_message
  => flush()
  => do_interrupt_dma_transfer()
    => set_up_next_transfer()
    /* Enable SSP, turn on interrupts */
    writew((readw(SSP_CR1(pl022->virtbase)) |
           SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase));

...

=> pl022_interrupt_handler()
  => readwriter()

                                        /* disable the SPI/SSP operation */
                                        => writew((readw(SSP_CR1(pl022->virtbase)) &
                                                  (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));

Lockup! SPI controller is disabled and the data will never be received. Whole
SPI subsystem is waiting for transfer ACK and blocked.

So, only signal transfer completion after disabling the controller.

Fixes: fd316941c (spi/pl022: disable port when unused)
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-pl022.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -503,12 +503,12 @@ static void giveback(struct pl022 *pl022
 	pl022->cur_msg = NULL;
 	pl022->cur_transfer = NULL;
 	pl022->cur_chip = NULL;
-	spi_finalize_current_message(pl022->master);
 
 	/* disable the SPI/SSP operation */
 	writew((readw(SSP_CR1(pl022->virtbase)) &
 		(~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
 
+	spi_finalize_current_message(pl022->master);
 }
 
 /**

[PATCH 3.14 41/79] ALSA: control: Add sanity checks for user ctl id name string

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit be3bb8236db2d0fcd705062ae2e2a9d75131222f upstream.

There was no check about the id string of user control elements, so we
accepted even a control element with an empty string, which is
obviously bogus.  This patch adds more sanity checks of id strings.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/core/control.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/sound/core/control.c
+++ b/sound/core/control.c
@@ -1168,6 +1168,10 @@ static int snd_ctl_elem_add(struct snd_c
 
 	if (info->count < 1)
 		return -EINVAL;
+	if (!*info->id.name)
+		return -EINVAL;
+	if (strnlen(info->id.name, sizeof(info->id.name)) >= sizeof(info->id.name))
+		return -EINVAL;
 	access = info->access == 0 ? SNDRV_CTL_ELEM_ACCESS_READWRITE :
 		(info->access & (SNDRV_CTL_ELEM_ACCESS_READWRITE|
 				 SNDRV_CTL_ELEM_ACCESS_INACTIVE|

[PATCH 3.14 42/79] ALSA: hda - Fix built-in mic on Compaq Presario CQ60

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit ddb6ca75b5671b8fbf1909bc588c449ee74b34f9 upstream.

Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the
built-in mic NID 0x17 instead of NID 0x1d, and it results in the
non-working mic.  This patch just remaps the pin correctly via fixup.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_conexant.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -3232,6 +3232,7 @@ enum {
 	CXT_PINCFG_LENOVO_TP410,
 	CXT_PINCFG_LEMOTE_A1004,
 	CXT_PINCFG_LEMOTE_A1205,
+	CXT_PINCFG_COMPAQ_CQ60,
 	CXT_FIXUP_STEREO_DMIC,
 	CXT_FIXUP_INC_MIC_BOOST,
 	CXT_FIXUP_HEADPHONE_MIC_PIN,
@@ -3368,6 +3369,15 @@ static const struct hda_fixup cxt_fixups
 		.type = HDA_FIXUP_PINS,
 		.v.pins = cxt_pincfg_lemote,
 	},
+	[CXT_PINCFG_COMPAQ_CQ60] = {
+		.type = HDA_FIXUP_PINS,
+		.v.pins = (const struct hda_pintbl[]) {
+			/* 0x17 was falsely set up as a mic, it should 0x1d */
+			{ 0x17, 0x400001f0 },
+			{ 0x1d, 0x97a70120 },
+			{ }
+		}
+	},
 	[CXT_FIXUP_STEREO_DMIC] = {
 		.type = HDA_FIXUP_FUNC,
 		.v.func = cxt_fixup_stereo_dmic,
@@ -3411,6 +3421,7 @@ static const struct hda_fixup cxt_fixups
 };
 
 static const struct snd_pci_quirk cxt5051_fixups[] = {
+	SND_PCI_QUIRK(0x103c, 0x360b, "Compaq CQ60", CXT_PINCFG_COMPAQ_CQ60),
 	SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200),
 	{}
 };

[PATCH 3.14 43/79] ALSA: hda - Dont access stereo amps for mono channel widgets

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit ef403edb75580a3ec5d155f5de82155f0419c621 upstream.

The current HDA generic parser initializes / modifies the amp values
always in stereo, but this seems causing the problem on ALC3229 codec
that has a few mono channel widgets: namely, these mono widgets react
to actions for both channels equally.

In the driver code, we do care the mono channel and create a control
only for the left channel (as defined in HD-audio spec) for such a
node.  When the control is updated, only the left channel value is
changed.  However, in the resume, the right channel value is also
restored from the initial value we took as stereo, and this overwrites
the left channel value.  This ends up being the silent output as the
right channel has been never touched and remains muted.

This patch covers the places where unconditional stereo amp accesses
are done and converts to the conditional accesses.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94581
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_generic.c |   30 ++++++++++++++++++++++--------
 1 file changed, 22 insertions(+), 8 deletions(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -658,7 +658,23 @@ static void init_amp(struct hda_codec *c
 {
 	unsigned int caps = query_amp_caps(codec, nid, dir);
 	int val = get_amp_val_to_activate(codec, nid, dir, caps, false);
-	snd_hda_codec_amp_init_stereo(codec, nid, dir, idx, 0xff, val);
+
+	if (get_wcaps(codec, nid) & AC_WCAP_STEREO)
+		snd_hda_codec_amp_init_stereo(codec, nid, dir, idx, 0xff, val);
+	else
+		snd_hda_codec_amp_init(codec, nid, 0, dir, idx, 0xff, val);
+}
+
+/* update the amp, doing in stereo or mono depending on NID */
+static int update_amp(struct hda_codec *codec, hda_nid_t nid, int dir, int idx,
+		      unsigned int mask, unsigned int val)
+{
+	if (get_wcaps(codec, nid) & AC_WCAP_STEREO)
+		return snd_hda_codec_amp_stereo(codec, nid, dir, idx,
+						mask, val);
+	else
+		return snd_hda_codec_amp_update(codec, nid, 0, dir, idx,
+						mask, val);
 }
 
 /* calculate amp value mask we can modify;
@@ -698,7 +714,7 @@ static void activate_amp(struct hda_code
 		return;
 
 	val &= mask;
-	snd_hda_codec_amp_stereo(codec, nid, dir, idx, mask, val);
+	update_amp(codec, nid, dir, idx, mask, val);
 }
 
 static void activate_amp_out(struct hda_codec *codec, struct nid_path *path,
@@ -4337,13 +4353,11 @@ static void mute_all_mixer_nid(struct hd
 	has_amp = nid_has_mute(codec, mix, HDA_INPUT);
 	for (i = 0; i < nums; i++) {
 		if (has_amp)
-			snd_hda_codec_amp_stereo(codec, mix,
-						 HDA_INPUT, i,
-						 0xff, HDA_AMP_MUTE);
+			update_amp(codec, mix, HDA_INPUT, i,
+				   0xff, HDA_AMP_MUTE);
 		else if (nid_has_volume(codec, conn[i], HDA_OUTPUT))
-			snd_hda_codec_amp_stereo(codec, conn[i],
-						 HDA_OUTPUT, 0,
-						 0xff, HDA_AMP_MUTE);
+			update_amp(codec, conn[i], HDA_OUTPUT, 0,
+				   0xff, HDA_AMP_MUTE);
 	}
 }
 

[PATCH 3.14 44/79] ALSA: hda - Set single_adc_amp flag for CS420x codecs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit bad994f5b4ab57eec8d56c180edca00505c3eeb2 upstream.

CS420x codecs seem to deal only the single amps of ADC nodes even
though the nodes receive multiple inputs.  This leads to the
inconsistent amp value after S3/S4 resume, for example.

The fix is just to set codec->single_adc_amp flag.  Then the driver
handles these ADC amps as if single connections.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_cirrus.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -587,6 +587,7 @@ static int patch_cs420x(struct hda_codec
 		return -ENOMEM;
 
 	spec->gen.automute_hook = cs_automute;
+	codec->single_adc_amp = 1;
 
 	snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
 			   cs420x_fixups);

[PATCH 3.14 45/79] ALSA: hda - Add workaround for MacBook Air 5,2 built-in mic

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 2ddee91abe9cc34ddb6294ee14702b46ae07d460 upstream.

MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the
built-in mic records only the right channel.  Apply the same
workaround as MBP8,1 to spread the mono channel via a Cirrus codec
vendor-specific COEF setup.

Reported-and-tested-by: Vasil Zlatanov <vasil.zlatanov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_cirrus.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -396,6 +396,7 @@ static const struct snd_pci_quirk cs420x
 	SND_PCI_QUIRK(0x106b, 0x1c00, "MacBookPro 8,1", CS420X_MBP81),
 	SND_PCI_QUIRK(0x106b, 0x2000, "iMac 12,2", CS420X_IMAC27_122),
 	SND_PCI_QUIRK(0x106b, 0x2800, "MacBookPro 10,1", CS420X_MBP101),
+	SND_PCI_QUIRK(0x106b, 0x5600, "MacBookAir 5,2", CS420X_MBP81),
 	SND_PCI_QUIRK(0x106b, 0x5b00, "MacBookAir 4,2", CS420X_MBA42),
 	SND_PCI_QUIRK_VENDOR(0x106b, "Apple", CS420X_APPLE),
 	{} /* terminator */

[PATCH 3.14 46/79] ALSA: hda - Fix regression of HD-audio controller fallback modes

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit a1f3f1ca66bd12c339b17a0c2ef93a093f90a277 upstream.

The commit [63e51fd708f5: ALSA: hda - Don't take unresponsive D3
transition too serious] introduced a conditional fallback behavior to
the HD-audio controller depending on the flag set.  However, it
introduced a silly bug, too, that the flag was evaluated in a reverse
way.  This resulted in a regression of HD-audio controller driver
where it can't go to the fallback mode at communication errors.

Unfortunately (or fortunately?) this didn't come up until recently
because the affected code path is an error handling that happens only
on an unstable hardware chip.  Most of recent chips work stably, thus
they didn't hit this problem.  Now, we've got a regression report with
a VIA chip, and this seems indeed requiring the fallback to the
polling mode, and finally the bug was revealed.

The fix is a oneliner to remove the wrong logical NOT in the check.
(Lesson learned - be careful about double negation.)

The bug should be backported to stable, but the patch won't be
applicable to 3.13 or earlier because of the code splits.  The stable
fix patches for earlier kernels will be posted later manually.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021
Fixes: 63e51fd708f5 ('ALSA: hda - Don't take unresponsive D3 transition too serious')
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 sound/pci/hda/hda_intel.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -959,7 +959,7 @@ static unsigned int azx_rirb_get_respons
 		}
 	}
 
-	if (!bus->no_response_fallback)
+	if (bus->no_response_fallback)
 		return -1;
 
 	if (!chip->polling_mode && chip->poll_count < 2) {

[PATCH 3.14 47/79] ALSA: hda - Treat stereo-to-mono mix properly

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit cc261738add93947d138d2fabad9f4dbed4e5c00 upstream.

The commit [ef403edb7558: ALSA: hda - Don't access stereo amps for
mono channel widgets] fixed the handling of mono widgets in general,
but it still misses an exceptional case: namely, a mono mixer widget
taking a single stereo input.  In this case, it has stereo volumes
although it's a mono widget, and thus we have to take care of both
left and right input channels, as stated in HD-audio spec ("7.1.3
Widget Interconnection Rules").

This patch covers this missing piece by adding proper checks of stereo
amps in both the generic parser and the proc output codes.

Reported-by: Raymond Yau <superquad.vortex2@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/hda_generic.c |   21 +++++++++++++++++++--
 sound/pci/hda/hda_proc.c    |   38 ++++++++++++++++++++++++++++++--------
 2 files changed, 49 insertions(+), 10 deletions(-)

--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -653,13 +653,30 @@ static int get_amp_val_to_activate(struc
 	return val;
 }
 
+/* is this a stereo widget or a stereo-to-mono mix? */
+static bool is_stereo_amps(struct hda_codec *codec, hda_nid_t nid, int dir)
+{
+	unsigned int wcaps = get_wcaps(codec, nid);
+	hda_nid_t conn;
+
+	if (wcaps & AC_WCAP_STEREO)
+		return true;
+	if (dir != HDA_INPUT || get_wcaps_type(wcaps) != AC_WID_AUD_MIX)
+		return false;
+	if (snd_hda_get_num_conns(codec, nid) != 1)
+		return false;
+	if (snd_hda_get_connections(codec, nid, &conn, 1) < 0)
+		return false;
+	return !!(get_wcaps(codec, conn) & AC_WCAP_STEREO);
+}
+
 /* initialize the amp value (only at the first time) */
 static void init_amp(struct hda_codec *codec, hda_nid_t nid, int dir, int idx)
 {
 	unsigned int caps = query_amp_caps(codec, nid, dir);
 	int val = get_amp_val_to_activate(codec, nid, dir, caps, false);
 
-	if (get_wcaps(codec, nid) & AC_WCAP_STEREO)
+	if (is_stereo_amps(codec, nid, dir))
 		snd_hda_codec_amp_init_stereo(codec, nid, dir, idx, 0xff, val);
 	else
 		snd_hda_codec_amp_init(codec, nid, 0, dir, idx, 0xff, val);
@@ -669,7 +686,7 @@ static void init_amp(struct hda_codec *c
 static int update_amp(struct hda_codec *codec, hda_nid_t nid, int dir, int idx,
 		      unsigned int mask, unsigned int val)
 {
-	if (get_wcaps(codec, nid) & AC_WCAP_STEREO)
+	if (is_stereo_amps(codec, nid, dir))
 		return snd_hda_codec_amp_stereo(codec, nid, dir, idx,
 						mask, val);
 	else
--- a/sound/pci/hda/hda_proc.c
+++ b/sound/pci/hda/hda_proc.c
@@ -134,13 +134,38 @@ static void print_amp_caps(struct snd_in
 		    (caps & AC_AMPCAP_MUTE) >> AC_AMPCAP_MUTE_SHIFT);
 }
 
+/* is this a stereo widget or a stereo-to-mono mix? */
+static bool is_stereo_amps(struct hda_codec *codec, hda_nid_t nid,
+			   int dir, unsigned int wcaps, int indices)
+{
+	hda_nid_t conn;
+
+	if (wcaps & AC_WCAP_STEREO)
+		return true;
+	/* check for a stereo-to-mono mix; it must be:
+	 * only a single connection, only for input, and only a mixer widget
+	 */
+	if (indices != 1 || dir != HDA_INPUT ||
+	    get_wcaps_type(wcaps) != AC_WID_AUD_MIX)
+		return false;
+
+	if (snd_hda_get_raw_connections(codec, nid, &conn, 1) < 0)
+		return false;
+	/* the connection source is a stereo? */
+	wcaps = snd_hda_param_read(codec, conn, AC_PAR_AUDIO_WIDGET_CAP);
+	return !!(wcaps & AC_WCAP_STEREO);
+}
+
 static void print_amp_vals(struct snd_info_buffer *buffer,
 			   struct hda_codec *codec, hda_nid_t nid,
-			   int dir, int stereo, int indices)
+			   int dir, unsigned int wcaps, int indices)
 {
 	unsigned int val;
+	bool stereo;
 	int i;
 
+	stereo = is_stereo_amps(codec, nid, dir, wcaps, indices);
+
 	dir = dir == HDA_OUTPUT ? AC_AMP_GET_OUTPUT : AC_AMP_GET_INPUT;
 	for (i = 0; i < indices; i++) {
 		snd_iprintf(buffer, " [");
@@ -757,12 +782,10 @@ static void print_codec_info(struct snd_
 			    (codec->single_adc_amp &&
 			     wid_type == AC_WID_AUD_IN))
 				print_amp_vals(buffer, codec, nid, HDA_INPUT,
-					       wid_caps & AC_WCAP_STEREO,
-					       1);
+					       wid_caps, 1);
 			else
 				print_amp_vals(buffer, codec, nid, HDA_INPUT,
-					       wid_caps & AC_WCAP_STEREO,
-					       conn_len);
+					       wid_caps, conn_len);
 		}
 		if (wid_caps & AC_WCAP_OUT_AMP) {
 			snd_iprintf(buffer, "  Amp-Out caps: ");
@@ -771,11 +794,10 @@ static void print_codec_info(struct snd_
 			if (wid_type == AC_WID_PIN &&
 			    codec->pin_amp_workaround)
 				print_amp_vals(buffer, codec, nid, HDA_OUTPUT,
-					       wid_caps & AC_WCAP_STEREO,
-					       conn_len);
+					       wid_caps, conn_len);
 			else
 				print_amp_vals(buffer, codec, nid, HDA_OUTPUT,
-					       wid_caps & AC_WCAP_STEREO, 1);
+					       wid_caps, 1);
 		}
 
 		switch (wid_type) {

[PATCH 3.14 48/79] mtd: nand: pxa3xx: Fix PIO FIFO draining

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxime Ripard <maxime.ripard@free-electrons.com>

commit 8dad0386b97c4bd6edd56752ca7f2e735fe5beb4 upstream.

The NDDB register holds the data that are needed by the read and write
commands.

However, during a read PIO access, the datasheet specifies that after each 32
bytes read in that register, when BCH is enabled, we have to make sure that the
RDDREQ bit is set in the NDSR register.

This fixes an issue that was seen on the Armada 385, and presumably other mvebu
SoCs, when a read on a newly erased page would end up in the driver reporting a
timeout from the NAND.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/nand/pxa3xx_nand.c |   48 +++++++++++++++++++++++++++++++++++------
 1 file changed, 42 insertions(+), 6 deletions(-)

--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -481,6 +481,42 @@ static void disable_int(struct pxa3xx_na
 	nand_writel(info, NDCR, ndcr | int_mask);
 }
 
+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
+{
+	if (info->ecc_bch) {
+		int timeout;
+
+		/*
+		 * According to the datasheet, when reading from NDDB
+		 * with BCH enabled, after each 32 bytes reads, we
+		 * have to make sure that the NDSR.RDDREQ bit is set.
+		 *
+		 * Drain the FIFO 8 32 bits reads at a time, and skip
+		 * the polling on the last read.
+		 */
+		while (len > 8) {
+			__raw_readsl(info->mmio_base + NDDB, data, 8);
+
+			for (timeout = 0;
+			     !(nand_readl(info, NDSR) & NDSR_RDDREQ);
+			     timeout++) {
+				if (timeout >= 5) {
+					dev_err(&info->pdev->dev,
+						"Timeout on RDDREQ while draining the FIFO\n");
+					return;
+				}
+
+				mdelay(1);
+			}
+
+			data += 32;
+			len -= 8;
+		}
+	}
+
+	__raw_readsl(info->mmio_base + NDDB, data, len);
+}
+
 static void handle_data_pio(struct pxa3xx_nand_info *info)
 {
 	unsigned int do_bytes = min(info->data_size, info->chunk_size);
@@ -497,14 +533,14 @@ static void handle_data_pio(struct pxa3x
 				      DIV_ROUND_UP(info->oob_size, 4));
 		break;
 	case STATE_PIO_READING:
-		__raw_readsl(info->mmio_base + NDDB,
-			     info->data_buff + info->data_buff_pos,
-			     DIV_ROUND_UP(do_bytes, 4));
+		drain_fifo(info,
+			   info->data_buff + info->data_buff_pos,
+			   DIV_ROUND_UP(do_bytes, 4));
 
 		if (info->oob_size > 0)
-			__raw_readsl(info->mmio_base + NDDB,
-				     info->oob_buff + info->oob_buff_pos,
-				     DIV_ROUND_UP(info->oob_size, 4));
+			drain_fifo(info,
+				   info->oob_buff + info->oob_buff_pos,
+				   DIV_ROUND_UP(info->oob_size, 4));
 		break;
 	default:
 		dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,

[PATCH 3.14 49/79] bnx2x: Force fundamental reset for EEH recovery

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian King <brking@linux.vnet.ibm.com>

commit da293700568ed3d96fcf062ac15d7d7c41377f11 upstream.

EEH recovery for bnx2x based adapters is not reliable on all Power
systems using the default hot reset, which can result in an
unrecoverable EEH error. Forcing the use of fundamental reset
during EEH recovery fixes this.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12395,6 +12395,9 @@ static int bnx2x_init_dev(struct bnx2x *
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
 			       PCICFG_VENDOR_ID_OFFSET);
 
+	/* Set PCIe reset type to fundamental for EEH recovery */
+	pdev->needs_freset = 1;
+
 	/* AER (Advanced Error reporting) configuration */
 	rc = pci_enable_pcie_error_reporting(pdev);
 	if (!rc)

[PATCH 3.14 50/79] regulator: Only enable disabled regulators on resume

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>

commit 0548bf4f5ad6fc3bd93c4940fa48078b34609682 upstream.

The _regulator_do_enable() call ought to be a no-op when called on an
already-enabled regulator.  However, as an optimization
_regulator_enable() doesn't call _regulator_do_enable() on an already
enabled regulator.  That means we never test the case of calling
_regulator_do_enable() during normal usage and there may be hidden
bugs or warnings.  We have seen warnings issued by the tps65090 driver
and bugs when using the GPIO enable pin.

Let's match the same optimization that _regulator_enable() in
regulator_suspend_finish().  That may speed up suspend/resume and also
avoids exposing hidden bugs.

[Use much clearer commit message from Doug Anderson]

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/core.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3631,9 +3631,11 @@ int regulator_suspend_finish(void)
 	list_for_each_entry(rdev, &regulator_list, list) {
 		mutex_lock(&rdev->mutex);
 		if (rdev->use_count > 0  || rdev->constraints->always_on) {
-			error = _regulator_do_enable(rdev);
-			if (error)
-				ret = error;
+			if (!_regulator_is_enabled(rdev)) {
+				error = _regulator_do_enable(rdev);
+				if (error)
+					ret = error;
+			}
 		} else {
 			if (!have_full_constraints())
 				goto unlock;

[PATCH 3.14 51/79] regulator: core: Fix enable GPIO reference counting

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Doug Anderson <dianders@chromium.org>

commit 29d62ec5f87fbeec8413e2215ddad12e7f972e4c upstream.

Normally _regulator_do_enable() isn't called on an already-enabled
rdev.  That's because the main caller, _regulator_enable() always
calls _regulator_is_enabled() and only calls _regulator_do_enable() if
the rdev was not already enabled.

However, there is one caller of _regulator_do_enable() that doesn't
check: regulator_suspend_finish().  While we might want to make
regulator_suspend_finish() behave more like _regulator_enable(), it's
probably also a good idea to make _regulator_do_enable() robust if it
is called on an already enabled rdev.

At the moment, _regulator_do_enable() is _not_ robust for already
enabled rdevs if we're using an ena_pin.  Each time
_regulator_do_enable() is called for an rdev using an ena_pin the
reference count of the ena_pin is incremented even if the rdev was
already enabled.  This is not as intended because the ena_pin is for
something else: for keeping track of how many active rdevs there are
sharing the same ena_pin.

Here's how the reference counting works here:

* Each time _regulator_enable() is called we increment
  rdev->use_count, so _regulator_enable() calls need to be balanced
  with _regulator_disable() calls.

* There is no explicit reference counting in _regulator_do_enable()
  which is normally just a warapper around rdev->desc->ops->enable()
  with code for supporting delays.  It's not expected that the
  "ops->enable()" call do reference counting.

* Since regulator_ena_gpio_ctrl() does have reference counting
  (handling the sharing of the pin amongst multiple rdevs), we
  shouldn't call it if the current rdev is already enabled.

Note that as part of this we cleanup (remove) the initting of
ena_gpio_state in regulator_register().  In _regulator_do_enable(),
_regulator_do_disable() and _regulator_is_enabled() is is clear that
ena_gpio_state should be the state of whether this particular rdev has
requested the GPIO be enabled.  regulator_register() was initting it
as the actual state of the pin.

Fixes: 967cfb18c0e3 ("regulator: core: manage enable GPIO list")
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/regulator/core.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1764,10 +1764,12 @@ static int _regulator_do_enable(struct r
 	trace_regulator_enable(rdev_get_name(rdev));
 
 	if (rdev->ena_pin) {
-		ret = regulator_ena_gpio_ctrl(rdev, true);
-		if (ret < 0)
-			return ret;
-		rdev->ena_gpio_state = 1;
+		if (!rdev->ena_gpio_state) {
+			ret = regulator_ena_gpio_ctrl(rdev, true);
+			if (ret < 0)
+				return ret;
+			rdev->ena_gpio_state = 1;
+		}
 	} else if (rdev->desc->ops->enable) {
 		ret = rdev->desc->ops->enable(rdev);
 		if (ret < 0)
@@ -1897,10 +1899,12 @@ static int _regulator_do_disable(struct
 	trace_regulator_disable(rdev_get_name(rdev));
 
 	if (rdev->ena_pin) {
-		ret = regulator_ena_gpio_ctrl(rdev, false);
-		if (ret < 0)
-			return ret;
-		rdev->ena_gpio_state = 0;
+		if (rdev->ena_gpio_state) {
+			ret = regulator_ena_gpio_ctrl(rdev, false);
+			if (ret < 0)
+				return ret;
+			rdev->ena_gpio_state = 0;
+		}
 
 	} else if (rdev->desc->ops->disable) {
 		ret = rdev->desc->ops->disable(rdev);
@@ -3454,12 +3458,6 @@ regulator_register(const struct regulato
 				 config->ena_gpio, ret);
 			goto wash;
 		}
-
-		if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
-			rdev->ena_gpio_state = 1;
-
-		if (config->ena_gpio_invert)
-			rdev->ena_gpio_state = !rdev->ena_gpio_state;
 	}
 
 	/* set regulator constraints */

[PATCH 3.14 52/79] nilfs2: fix deadlock of segment constructor during recovery

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

commit 283ee1482f349d6c0c09dfb725db5880afc56813 upstream.

According to a report from Yuxuan Shui, nilfs2 in kernel 3.19 got stuck
during recovery at mount time.  The code path that caused the deadlock was
as follows:

  nilfs_fill_super()
    load_nilfs()
      nilfs_salvage_orphan_logs()
        * Do roll-forwarding, attach segment constructor for recovery,
          and kick it.

        nilfs_segctor_thread()
          nilfs_segctor_thread_construct()
           * A lock is held with nilfs_transaction_lock()
             nilfs_segctor_do_construct()
               nilfs_segctor_drop_written_files()
                 iput()
                   iput_final()
                     write_inode_now()
                       writeback_single_inode()
                         __writeback_single_inode()
                           do_writepages()
                             nilfs_writepage()
                               nilfs_construct_dsync_segment()
                                 nilfs_transaction_lock() --> deadlock

This can happen if commit 7ef3ff2fea8b ("nilfs2: fix deadlock of segment
constructor over I_SYNC flag") is applied and roll-forward recovery was
performed at mount time.  The roll-forward recovery can happen if datasync
write is done and the file system crashes immediately after that.  For
instance, we can reproduce the issue with the following steps:

 < nilfs2 is mounted on /nilfs (device: /dev/sdb1) >
 # dd if=/dev/zero of=/nilfs/test bs=4k count=1 && sync
 # dd if=/dev/zero of=/nilfs/test conv=notrunc oflag=dsync bs=4k
 count=1 && reboot -nfh
 < the system will immediately reboot >
 # mount -t nilfs2 /dev/sdb1 /nilfs

The deadlock occurs because iput() can run segment constructor through
writeback_single_inode() if MS_ACTIVE flag is not set on sb->s_flags.  The
above commit changed segment constructor so that it calls iput()
asynchronously for inodes with i_nlink == 0, but that change was
imperfect.

This fixes the another deadlock by deferring iput() in segment constructor
even for the case that mount is not finished, that is, for the case that
MS_ACTIVE flag is not set.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Reported-by: Yuxuan Shui <yshuiv7@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nilfs2/segment.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -1906,6 +1906,7 @@ static void nilfs_segctor_drop_written_f
 					     struct the_nilfs *nilfs)
 {
 	struct nilfs_inode_info *ii, *n;
+	int during_mount = !(sci->sc_super->s_flags & MS_ACTIVE);
 	int defer_iput = false;
 
 	spin_lock(&nilfs->ns_inode_lock);
@@ -1918,10 +1919,10 @@ static void nilfs_segctor_drop_written_f
 		brelse(ii->i_bh);
 		ii->i_bh = NULL;
 		list_del_init(&ii->i_dirty);
-		if (!ii->vfs_inode.i_nlink) {
+		if (!ii->vfs_inode.i_nlink || during_mount) {
 			/*
-			 * Defer calling iput() to avoid a deadlock
-			 * over I_SYNC flag for inodes with i_nlink == 0
+			 * Defer calling iput() to avoid deadlocks if
+			 * i_nlink == 0 or mount is not yet finished.
 			 */
 			list_add_tail(&ii->i_dirty, &sci->sc_iput_queue);
 			defer_iput = true;

[PATCH 3.14 53/79] drm/vmwgfx: Reorder device takedown somewhat

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Hellstrom <thellstrom@vmware.com>

commit 3458390b9f0ba784481d23134798faee27b5f16f upstream.

To take down the MOB and GMR memory types, the driver may have to issue
fence objects and thus make sure that the fence manager is taken down
after those memory types.
Reorder device init accordingly.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/vmwgfx/vmwgfx_drv.c |   77 ++++++++++++++++++------------------
 1 file changed, 40 insertions(+), 37 deletions(-)

--- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c
@@ -733,32 +733,6 @@ static int vmw_driver_load(struct drm_de
 		goto out_err1;
 	}
 
-	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
-			     (dev_priv->vram_size >> PAGE_SHIFT));
-	if (unlikely(ret != 0)) {
-		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
-		goto out_err2;
-	}
-
-	dev_priv->has_gmr = true;
-	if (((dev_priv->capabilities & (SVGA_CAP_GMR | SVGA_CAP_GMR2)) == 0) ||
-	    refuse_dma || ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
-					 VMW_PL_GMR) != 0) {
-		DRM_INFO("No GMR memory available. "
-			 "Graphics memory resources are very limited.\n");
-		dev_priv->has_gmr = false;
-	}
-
-	if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS) {
-		dev_priv->has_mob = true;
-		if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_MOB,
-				   VMW_PL_MOB) != 0) {
-			DRM_INFO("No MOB memory available. "
-				 "3D will be disabled.\n");
-			dev_priv->has_mob = false;
-		}
-	}
-
 	dev_priv->mmio_mtrr = arch_phys_wc_add(dev_priv->mmio_start,
 					       dev_priv->mmio_size);
 
@@ -821,6 +795,33 @@ static int vmw_driver_load(struct drm_de
 		goto out_no_fman;
 	}
 
+
+	ret = ttm_bo_init_mm(&dev_priv->bdev, TTM_PL_VRAM,
+			     (dev_priv->vram_size >> PAGE_SHIFT));
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("Failed initializing memory manager for VRAM.\n");
+		goto out_no_vram;
+	}
+
+	dev_priv->has_gmr = true;
+	if (((dev_priv->capabilities & (SVGA_CAP_GMR | SVGA_CAP_GMR2)) == 0) ||
+	    refuse_dma || ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_GMR,
+					 VMW_PL_GMR) != 0) {
+		DRM_INFO("No GMR memory available. "
+			 "Graphics memory resources are very limited.\n");
+		dev_priv->has_gmr = false;
+	}
+
+	if (dev_priv->capabilities & SVGA_CAP_GBOBJECTS) {
+		dev_priv->has_mob = true;
+		if (ttm_bo_init_mm(&dev_priv->bdev, VMW_PL_MOB,
+				   VMW_PL_MOB) != 0) {
+			DRM_INFO("No MOB memory available. "
+				 "3D will be disabled.\n");
+			dev_priv->has_mob = false;
+		}
+	}
+
 	vmw_kms_save_vga(dev_priv);
 
 	/* Start kms and overlay systems, needs fifo. */
@@ -846,6 +847,12 @@ out_no_fifo:
 	vmw_kms_close(dev_priv);
 out_no_kms:
 	vmw_kms_restore_vga(dev_priv);
+	if (dev_priv->has_mob)
+		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_MOB);
+	if (dev_priv->has_gmr)
+		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
+out_no_vram:
 	vmw_fence_manager_takedown(dev_priv->fman);
 out_no_fman:
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
@@ -861,12 +868,6 @@ out_err4:
 	iounmap(dev_priv->mmio_virt);
 out_err3:
 	arch_phys_wc_del(dev_priv->mmio_mtrr);
-	if (dev_priv->has_mob)
-		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_MOB);
-	if (dev_priv->has_gmr)
-		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
-out_err2:
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 out_err1:
 	vmw_ttm_global_release(dev_priv);
@@ -896,6 +897,13 @@ static int vmw_driver_unload(struct drm_
 	}
 	vmw_kms_close(dev_priv);
 	vmw_overlay_close(dev_priv);
+
+	if (dev_priv->has_mob)
+		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_MOB);
+	if (dev_priv->has_gmr)
+		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
+	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
+
 	vmw_fence_manager_takedown(dev_priv->fman);
 	if (dev_priv->capabilities & SVGA_CAP_IRQMASK)
 		drm_irq_uninstall(dev_priv->dev);
@@ -907,11 +915,6 @@ static int vmw_driver_unload(struct drm_
 	ttm_object_device_release(&dev_priv->tdev);
 	iounmap(dev_priv->mmio_virt);
 	arch_phys_wc_del(dev_priv->mmio_mtrr);
-	if (dev_priv->has_mob)
-		(void) ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_MOB);
-	if (dev_priv->has_gmr)
-		(void)ttm_bo_clean_mm(&dev_priv->bdev, VMW_PL_GMR);
-	(void)ttm_bo_clean_mm(&dev_priv->bdev, TTM_PL_VRAM);
 	(void)ttm_bo_device_release(&dev_priv->bdev);
 	vmw_ttm_global_release(dev_priv);
 

[PATCH 3.14 54/79] xen/events: avoid NULL pointer dereference in dom0 on large machines

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Juergen Gross <jgross@suse.com>

commit 85e40b0539b24518c8bdf63e2605c8522377d00f upstream.

Using the pvops kernel a NULL pointer dereference was detected on a
large machine (144 processors) when booting as dom0 in
evtchn_fifo_unmask() during assignment of a pirq.

The event channel in question was the first to need a new entry in
event_array[] in events_fifo.c. Unfortunately xen_irq_info_pirq_setup()
is called with evtchn being 0 for a new pirq and the real event channel
number is assigned to the pirq only during __startup_pirq().

It is mandatory to call xen_evtchn_port_setup() after assigning the
event channel number to the pirq to make sure all memory needed for the
event channel is allocated.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/events/events_base.c |   18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

--- a/drivers/xen/events/events_base.c
+++ b/drivers/xen/events/events_base.c
@@ -547,20 +547,26 @@ static unsigned int __startup_pirq(unsig
 	pirq_query_unmask(irq);
 
 	rc = set_evtchn_to_irq(evtchn, irq);
-	if (rc != 0) {
-		pr_err("irq%d: Failed to set port to irq mapping (%d)\n",
-		       irq, rc);
-		xen_evtchn_close(evtchn);
-		return 0;
-	}
+	if (rc)
+		goto err;
+
 	bind_evtchn_to_cpu(evtchn, 0);
 	info->evtchn = evtchn;
 
+	rc = xen_evtchn_port_setup(info);
+	if (rc)
+		goto err;
+
 out:
 	unmask_evtchn(evtchn);
 	eoi_pirq(irq_get_irq_data(irq));
 
 	return 0;
+
+err:
+	pr_err("irq%d: Failed to set port to irq mapping (%d)\n", irq, rc);
+	xen_evtchn_close(evtchn);
+	return 0;
 }
 
 static unsigned int startup_pirq(struct irq_data *data)

[PATCH 3.14 55/79] xen-pciback: limit guest control of command register

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit af6fc858a35b90e89ea7a7ee58e66628c55c776b upstream.

Otherwise the guest can abuse that control to cause e.g. PCIe
Unsupported Request responses by disabling memory and/or I/O decoding
and subsequently causing (CPU side) accesses to the respective address
ranges, which (depending on system configuration) may be fatal to the
host.

Note that to alter any of the bits collected together as
PCI_COMMAND_GUEST permissive mode is now required to be enabled
globally or on the specific device.

This is CVE-2015-2150 / XSA-120.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/xen-pciback/conf_space.c        |    2 
 drivers/xen/xen-pciback/conf_space.h        |    2 
 drivers/xen/xen-pciback/conf_space_header.c |   59 ++++++++++++++++++++++------
 3 files changed, 50 insertions(+), 13 deletions(-)

--- a/drivers/xen/xen-pciback/conf_space.c
+++ b/drivers/xen/xen-pciback/conf_space.c
@@ -16,7 +16,7 @@
 #include "conf_space.h"
 #include "conf_space_quirks.h"
 
-static bool permissive;
+bool permissive;
 module_param(permissive, bool, 0644);
 
 /* This is where xen_pcibk_read_config_byte, xen_pcibk_read_config_word,
--- a/drivers/xen/xen-pciback/conf_space.h
+++ b/drivers/xen/xen-pciback/conf_space.h
@@ -64,6 +64,8 @@ struct config_field_entry {
 	void *data;
 };
 
+extern bool permissive;
+
 #define OFFSET(cfg_entry) ((cfg_entry)->base_offset+(cfg_entry)->field->offset)
 
 /* Add fields to a device - the add_fields macro expects to get a pointer to
--- a/drivers/xen/xen-pciback/conf_space_header.c
+++ b/drivers/xen/xen-pciback/conf_space_header.c
@@ -11,6 +11,10 @@
 #include "pciback.h"
 #include "conf_space.h"
 
+struct pci_cmd_info {
+	u16 val;
+};
+
 struct pci_bar_info {
 	u32 val;
 	u32 len_val;
@@ -20,22 +24,36 @@ struct pci_bar_info {
 #define is_enable_cmd(value) ((value)&(PCI_COMMAND_MEMORY|PCI_COMMAND_IO))
 #define is_master_cmd(value) ((value)&PCI_COMMAND_MASTER)
 
-static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+/* Bits guests are allowed to control in permissive mode. */
+#define PCI_COMMAND_GUEST (PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| \
+			   PCI_COMMAND_INVALIDATE|PCI_COMMAND_VGA_PALETTE| \
+			   PCI_COMMAND_WAIT|PCI_COMMAND_FAST_BACK)
+
+static void *command_init(struct pci_dev *dev, int offset)
 {
-	int i;
-	int ret;
+	struct pci_cmd_info *cmd = kmalloc(sizeof(*cmd), GFP_KERNEL);
+	int err;
 
-	ret = xen_pcibk_read_config_word(dev, offset, value, data);
-	if (!pci_is_enabled(dev))
-		return ret;
-
-	for (i = 0; i < PCI_ROM_RESOURCE; i++) {
-		if (dev->resource[i].flags & IORESOURCE_IO)
-			*value |= PCI_COMMAND_IO;
-		if (dev->resource[i].flags & IORESOURCE_MEM)
-			*value |= PCI_COMMAND_MEMORY;
+	if (!cmd)
+		return ERR_PTR(-ENOMEM);
+
+	err = pci_read_config_word(dev, PCI_COMMAND, &cmd->val);
+	if (err) {
+		kfree(cmd);
+		return ERR_PTR(err);
 	}
 
+	return cmd;
+}
+
+static int command_read(struct pci_dev *dev, int offset, u16 *value, void *data)
+{
+	int ret = pci_read_config_word(dev, offset, value);
+	const struct pci_cmd_info *cmd = data;
+
+	*value &= PCI_COMMAND_GUEST;
+	*value |= cmd->val & ~PCI_COMMAND_GUEST;
+
 	return ret;
 }
 
@@ -43,6 +61,8 @@ static int command_write(struct pci_dev
 {
 	struct xen_pcibk_dev_data *dev_data;
 	int err;
+	u16 val;
+	struct pci_cmd_info *cmd = data;
 
 	dev_data = pci_get_drvdata(dev);
 	if (!pci_is_enabled(dev) && is_enable_cmd(value)) {
@@ -83,6 +103,19 @@ static int command_write(struct pci_dev
 		}
 	}
 
+	cmd->val = value;
+
+	if (!permissive && (!dev_data || !dev_data->permissive))
+		return 0;
+
+	/* Only allow the guest to control certain bits. */
+	err = pci_read_config_word(dev, offset, &val);
+	if (err || val == value)
+		return err;
+
+	value &= PCI_COMMAND_GUEST;
+	value |= val & ~PCI_COMMAND_GUEST;
+
 	return pci_write_config_word(dev, offset, value);
 }
 
@@ -282,6 +315,8 @@ static const struct config_field header_
 	{
 	 .offset    = PCI_COMMAND,
 	 .size      = 2,
+	 .init      = command_init,
+	 .release   = bar_release,
 	 .u.w.read  = command_read,
 	 .u.w.write = command_write,
 	},

[PATCH 3.14 56/79] libsas: Fix Kernel Crash in smp_execute_task

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Bottomley <JBottomley@Parallels.com>

commit 6302ce4d80aa82b3fdb5c5cd68e7268037091b47 upstream.

This crash was reported:

[  366.947370] sd 3:0:1:0: [sdb] Spinning up disk....
[  368.804046] BUG: unable to handle kernel NULL pointer dereference at           (null)
[  368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804098] PGD 0
[  368.804114] Oops: 0002 [#1] SMP
[  368.804143] CPU 1
[  368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common
[  368.804749]
[  368.804764] Pid: 392, comm: kworker/u:3 Tainted: P        W  O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920
[  368.804802] RIP: 0010:[<ffffffff81358457>]  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.804827] RSP: 0018:ffff880117001cc0  EFLAGS: 00010246
[  368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420
[  368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4
[  368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe
[  368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4
[  368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8
[  368.804916] FS:  0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000
[  368.804931] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[  368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0
[  368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0)
[  368.805009] Stack:
[  368.805017]  ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c
[  368.805062]  000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000
[  368.805100]  ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac
[  368.805135] Call Trace:
[  368.805153]  [<ffffffff81056f7c>] ? up+0xb/0x33
[  368.805168]  [<ffffffff813583ac>] ? mutex_lock+0x16/0x25
[  368.805194]  [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas]
[  368.805217]  [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas]
[  368.805240]  [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas]
[  368.805264]  [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas]
[  368.805280]  [<ffffffff81355a2a>] ? printk+0x43/0x48
[  368.805296]  [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd
[  368.805318]  [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas]
[  368.805336]  [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c
[  368.805351]  [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152
[  368.805366]  [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163
[  368.805382]  [<ffffffff81052c4e>] ? kthread+0x79/0x81
[  368.805399]  [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10
[  368.805416]  [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9
[  368.805431]  [<ffffffff8135fea0>] ? gs_change+0x13/0x13
[  368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41
[  368.805851] RIP  [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b
[  368.805877]  RSP <ffff880117001cc0>
[  368.805886] CR2: 0000000000000000
[  368.805899] ---[ end trace b720682065d8f4cc ]---

It's directly caused by 89d3cf6 [SCSI] libsas: add mutex for SMP task
execution, but shows a deeper cause: expander functions expect to be able to
cast to and treat domain devices as expanders.  The correct fix is to only do
expander discover when we know we've got an expander device to avoid wrongly
casting a non-expander device.

Reported-by: Praveen Murali <pmurali@logicube.com>
Tested-by: Praveen Murali <pmurali@logicube.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/libsas/sas_discover.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/scsi/libsas/sas_discover.c
+++ b/drivers/scsi/libsas/sas_discover.c
@@ -500,6 +500,7 @@ static void sas_revalidate_domain(struct
 	struct sas_discovery_event *ev = to_sas_discovery_event(work);
 	struct asd_sas_port *port = ev->port;
 	struct sas_ha_struct *ha = port->ha;
+	struct domain_device *ddev = port->port_dev;
 
 	/* prevent revalidation from finding sata links in recovery */
 	mutex_lock(&ha->disco_mutex);
@@ -514,8 +515,9 @@ static void sas_revalidate_domain(struct
 	SAS_DPRINTK("REVALIDATING DOMAIN on port %d, pid:%d\n", port->id,
 		    task_pid_nr(current));
 
-	if (port->port_dev)
-		res = sas_ex_revalidate_domain(port->port_dev);
+	if (ddev && (ddev->dev_type == SAS_FANOUT_EXPANDER_DEVICE ||
+		     ddev->dev_type == SAS_EDGE_EXPANDER_DEVICE))
+		res = sas_ex_revalidate_domain(ddev);
 
 	SAS_DPRINTK("done REVALIDATING DOMAIN on port %d, pid:%d, res 0x%x\n",
 		    port->id, task_pid_nr(current), res);

[PATCH 3.14 57/79] pagemap: do not leak physical addresses to non-privileged userspace

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>

commit ab676b7d6fbf4b294bf198fb27ade5b0e865c7ce upstream.

As pointed by recent post[1] on exploiting DRAM physical imperfection,
/proc/PID/pagemap exposes sensitive information which can be used to do
attacks.

This disallows anybody without CAP_SYS_ADMIN to read the pagemap.

[1] http://googleprojectzero.blogspot.com/2015/03/exploiting-dram-rowhammer-bug-to-gain.html

[ Eventually we might want to do anything more finegrained, but for now
  this is the simple model.   - Linus ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Seaborn <mseaborn@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/proc/task_mmu.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -1227,6 +1227,9 @@ out:
 
 static int pagemap_open(struct inode *inode, struct file *file)
 {
+	/* do not disclose physical addresses: attack vector */
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
 	pr_warn_once("Bits 55-60 of /proc/PID/pagemap entries are about "
 			"to stop being page-shift some time soon. See the "
 			"linux/Documentation/vm/pagemap.txt for details.\n");

[PATCH 3.14 58/79] crypto: arm/aes update NEON AES module to latest OpenSSL version

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel <ard.biesheuvel@linaro.org>

commit 001eabfd54c0cbf9d7d16264ddc8cc0bee67e3ed upstream.

This updates the bit sliced AES module to the latest version in the
upstream OpenSSL repository (e620e5ae37bc). This is needed to fix a
bug in the XTS decryption path, where data chunked in a certain way
could trigger the ciphertext stealing code, which is not supposed to
be active in the kernel build (The kernel implementation of XTS only
supports round multiples of the AES block size of 16 bytes, whereas
the conformant OpenSSL implementation of XTS supports inputs of
arbitrary size by applying ciphertext stealing). This is fixed in
the upstream version by adding the missing #ifndef XTS_CHAIN_TWEAK
around the offending instructions.

The upstream code also contains the change applied by Russell to
build the code unconditionally, i.e., even if __LINUX_ARM_ARCH__ < 7,
but implemented slightly differently.

Fixes: e4e7f10bfc40 ("ARM: add support for bit sliced AES using NEON instructions")
Reported-by: Adrian Kotelba <adrian.kotelba@gmail.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/crypto/aesbs-core.S_shipped |   12 ++++++++----
 arch/arm/crypto/bsaes-armv7.pl       |   12 ++++++++----
 2 files changed, 16 insertions(+), 8 deletions(-)

--- a/arch/arm/crypto/aesbs-core.S_shipped
+++ b/arch/arm/crypto/aesbs-core.S_shipped
@@ -58,14 +58,18 @@
 # define VFP_ABI_FRAME	0
 # define BSAES_ASM_EXTENDED_KEY
 # define XTS_CHAIN_TWEAK
-# define __ARM_ARCH__	7
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+# define __ARM_MAX_ARCH__ 7
 #endif
 
 #ifdef __thumb__
 # define adrl adr
 #endif
 
-#if __ARM_ARCH__>=7
+#if __ARM_MAX_ARCH__>=7
+.arch	armv7-a
+.fpu	neon
+
 .text
 .syntax	unified 	@ ARMv7-capable assembler is expected to handle this
 #ifdef __thumb2__
@@ -74,8 +78,6 @@
 .code   32
 #endif
 
-.fpu	neon
-
 .type	_bsaes_decrypt8,%function
 .align	4
 _bsaes_decrypt8:
@@ -2095,9 +2097,11 @@ bsaes_xts_decrypt:
 	vld1.8	{q8}, [r0]			@ initial tweak
 	adr	r2, .Lxts_magic
 
+#ifndef	XTS_CHAIN_TWEAK
 	tst	r9, #0xf			@ if not multiple of 16
 	it	ne				@ Thumb2 thing, sanity check in ARM
 	subne	r9, #0x10			@ subtract another 16 bytes
+#endif
 	subs	r9, #0x80
 
 	blo	.Lxts_dec_short
--- a/arch/arm/crypto/bsaes-armv7.pl
+++ b/arch/arm/crypto/bsaes-armv7.pl
@@ -701,14 +701,18 @@ $code.=<<___;
 # define VFP_ABI_FRAME	0
 # define BSAES_ASM_EXTENDED_KEY
 # define XTS_CHAIN_TWEAK
-# define __ARM_ARCH__	7
+# define __ARM_ARCH__ __LINUX_ARM_ARCH__
+# define __ARM_MAX_ARCH__ 7
 #endif
 
 #ifdef __thumb__
 # define adrl adr
 #endif
 
-#if __ARM_ARCH__>=7
+#if __ARM_MAX_ARCH__>=7
+.arch	armv7-a
+.fpu	neon
+
 .text
 .syntax	unified 	@ ARMv7-capable assembler is expected to handle this
 #ifdef __thumb2__
@@ -717,8 +721,6 @@ $code.=<<___;
 .code   32
 #endif
 
-.fpu	neon
-
 .type	_bsaes_decrypt8,%function
 .align	4
 _bsaes_decrypt8:
@@ -2076,9 +2078,11 @@ bsaes_xts_decrypt:
 	vld1.8	{@XMM[8]}, [r0]			@ initial tweak
 	adr	$magic, .Lxts_magic
 
+#ifndef	XTS_CHAIN_TWEAK
 	tst	$len, #0xf			@ if not multiple of 16
 	it	ne				@ Thumb2 thing, sanity check in ARM
 	subne	$len, #0x10			@ subtract another 16 bytes
+#endif
 	subs	$len, #0x80
 
 	blo	.Lxts_dec_short

[PATCH 3.14 59/79] crypto: aesni - fix memory usage in GCM decryption

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephan Mueller <smueller@chronox.de>

commit ccfe8c3f7e52ae83155cb038753f4c75b774ca8a upstream.

The kernel crypto API logic requires the caller to provide the
length of (ciphertext || authentication tag) as cryptlen for the
AEAD decryption operation. Thus, the cipher implementation must
calculate the size of the plaintext output itself and cannot simply use
cryptlen.

The RFC4106 GCM decryption operation tries to overwrite cryptlen memory
in req->dst. As the destination buffer for decryption only needs to hold
the plaintext memory but cryptlen references the input buffer holding
(ciphertext || authentication tag), the assumption of the destination
buffer length in RFC4106 GCM operation leads to a too large size. This
patch simply uses the already calculated plaintext size.

In addition, this patch fixes the offset calculation of the AAD buffer
pointer: as mentioned before, cryptlen already includes the size of the
tag. Thus, the tag does not need to be added. With the addition, the AAD
will be written beyond the already allocated buffer.

Note, this fixes a kernel crash that can be triggered from user space
via AF_ALG(aead) -- simply use the libkcapi test application
from [1] and update it to use rfc4106-gcm-aes.

Using [1], the changes were tested using CAVS vectors to demonstrate
that the crypto operation still delivers the right results.

[1] http://www.chronox.de/libkcapi.html

CC: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/aesni-intel_glue.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1109,7 +1109,7 @@ static int __driver_rfc4106_decrypt(stru
 		src = kmalloc(req->cryptlen + req->assoclen, GFP_ATOMIC);
 		if (!src)
 			return -ENOMEM;
-		assoc = (src + req->cryptlen + auth_tag_len);
+		assoc = (src + req->cryptlen);
 		scatterwalk_map_and_copy(src, req->src, 0, req->cryptlen, 0);
 		scatterwalk_map_and_copy(assoc, req->assoc, 0,
 			req->assoclen, 0);
@@ -1134,7 +1134,7 @@ static int __driver_rfc4106_decrypt(stru
 		scatterwalk_done(&src_sg_walk, 0, 0);
 		scatterwalk_done(&assoc_sg_walk, 0, 0);
 	} else {
-		scatterwalk_map_and_copy(dst, req->dst, 0, req->cryptlen, 1);
+		scatterwalk_map_and_copy(dst, req->dst, 0, tempCipherLen, 1);
 		kfree(src);
 	}
 	return retval;

[PATCH 3.14 60/79] x86/fpu: Avoid math_state_restore() without used_math() in __restore_xstate_sig()

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit a7c80ebcac3068b1c3cb27d538d29558c30010c8 upstream.

math_state_restore() assumes it is called with irqs disabled,
but this is not true if the caller is __restore_xstate_sig().

This means that if ia32_fxstate == T and __copy_from_user()
fails, __restore_xstate_sig() returns with irqs disabled too.

This triggers:

  BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:41
   dump_stack
   ___might_sleep
   ? _raw_spin_unlock_irqrestore
   __might_sleep
   down_read
   ? _raw_spin_unlock_irqrestore
   print_vma_addr
   signal_fault
   sys32_rt_sigreturn

Change __restore_xstate_sig() to call set_used_math()
unconditionally. This avoids enabling and disabling interrupts
in math_state_restore(). If copy_from_user() fails, we can
simply do fpu_finit() by hand.

[ Note: this is only the first step. math_state_restore() should
        not check used_math(), it should set this flag. While
	init_fpu() should simply die. ]

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150307153844.GB25954@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/xsave.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/arch/x86/kernel/xsave.c
+++ b/arch/x86/kernel/xsave.c
@@ -375,7 +375,7 @@ int __restore_xstate_sig(void __user *bu
 		 * thread's fpu state, reconstruct fxstate from the fsave
 		 * header. Sanitize the copied state etc.
 		 */
-		struct xsave_struct *xsave = &tsk->thread.fpu.state->xsave;
+		struct fpu *fpu = &tsk->thread.fpu;
 		struct user_i387_ia32_struct env;
 		int err = 0;
 
@@ -389,14 +389,15 @@ int __restore_xstate_sig(void __user *bu
 		 */
 		drop_fpu(tsk);
 
-		if (__copy_from_user(xsave, buf_fx, state_size) ||
+		if (__copy_from_user(&fpu->state->xsave, buf_fx, state_size) ||
 		    __copy_from_user(&env, buf, sizeof(env))) {
+			fpu_finit(fpu);
 			err = -1;
 		} else {
 			sanitize_restored_xstate(tsk, &env, xstate_bv, fx_only);
-			set_used_math();
 		}
 
+		set_used_math();
 		if (use_eager_fpu()) {
 			preempt_disable();
 			math_state_restore();

[PATCH 3.14 61/79] x86/fpu: Drop_fpu() should not assume that tsk equals current

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oleg Nesterov <oleg@redhat.com>

commit f4c3686386393c120710dd34df2a74183ab805fd upstream.

drop_fpu() does clear_used_math() and usually this is correct
because tsk == current.

However switch_fpu_finish()->restore_fpu_checking() is called before
__switch_to() updates the "current_task" variable. If it fails,
we will wrongly clear the PF_USED_MATH flag of the previous task.

So use clear_stopped_child_used_math() instead.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Riikonen <priikone@iki.fi>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150309171041.GB11388@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/fpu-internal.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/include/asm/fpu-internal.h
+++ b/arch/x86/include/asm/fpu-internal.h
@@ -368,7 +368,7 @@ static inline void drop_fpu(struct task_
 	preempt_disable();
 	tsk->thread.fpu_counter = 0;
 	__drop_fpu(tsk);
-	clear_used_math();
+	clear_stopped_child_used_math(tsk);
 	preempt_enable();
 }
 

[PATCH 3.14 62/79] x86/vdso: Fix the build on GCC5

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit e893286918d2cde3a94850d8f7101cd1039e0c62 upstream.

On gcc5 the kernel does not link:

  ld: .eh_frame_hdr table[4] FDE at 0000000000000648 overlaps table[5] FDE at 0000000000000670.

Because prior GCC versions always emitted NOPs on ALIGN directives, but
gcc5 started omitting them.

.LSTARTFDEDLSI1 says:

        /* HACK: The dwarf2 unwind routines will subtract 1 from the
           return address to get an address in the middle of the
           presumed call instruction.  Since we didn't get here via
           a call, we need to include the nop before the real start
           to make up for it.  */
        .long .LSTART_sigreturn-1-.     /* PC-relative start address */

But commit 69d0627a7f6e ("x86 vDSO: reorder vdso32 code") from 2.6.25
replaced .org __kernel_vsyscall+32,0x90 by ALIGN right before
__kernel_sigreturn.

Of course, ALIGN need not generate any NOP in there. Esp. gcc5 collapses
vclock_gettime.o and int80.o together with no generated NOPs as "ALIGN".

So fix this by adding to that point at least a single NOP and make the
function ALIGN possibly with more NOPs then.

Kudos for reporting and diagnosing should go to Richard.

Reported-by: Richard Biener <rguenther@suse.de>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1425543211-12542-1-git-send-email-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/vdso/vdso32/sigreturn.S |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/vdso/vdso32/sigreturn.S
+++ b/arch/x86/vdso/vdso32/sigreturn.S
@@ -17,6 +17,7 @@
 	.text
 	.globl __kernel_sigreturn
 	.type __kernel_sigreturn,@function
+	nop /* this guy is needed for .LSTARTFDEDLSI1 below (watch for HACK) */
 	ALIGN
 __kernel_sigreturn:
 .LSTART_sigreturn:

[PATCH 3.14 63/79] ipvs: add missing ip_vs_pe_put in sync code

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

commit 528c943f3bb919aef75ab2fff4f00176f09a4019 upstream.

ip_vs_conn_fill_param_sync() gets in param.pe a module
reference for persistence engine from __ip_vs_pe_getbyname()
but forgets to put it. Problem occurs in backup for
sync protocol v1 (2.6.39).

Also, pe_data usually comes in sync messages for
connection templates and ip_vs_conn_new() copies
the pointer only in this case. Make sure pe_data
is not leaked if it comes unexpectedly for normal
connections. Leak can happen only if bogus messages
are sent to backup server.

Fixes: fe5e7a1efb66 ("IPVS: Backup, Adding Version 1 receive capability")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_sync.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/net/netfilter/ipvs/ip_vs_sync.c
+++ b/net/netfilter/ipvs/ip_vs_sync.c
@@ -891,6 +891,8 @@ static void ip_vs_proc_conn(struct net *
 			IP_VS_DBG(2, "BACKUP, add new conn. failed\n");
 			return;
 		}
+		if (!(flags & IP_VS_CONN_F_TEMPLATE))
+			kfree(param->pe_data);
 	}
 
 	if (opt)
@@ -1164,6 +1166,7 @@ static inline int ip_vs_proc_sync_conn(s
 				(opt_flags & IPVS_OPT_F_SEQ_DATA ? &opt : NULL)
 				);
 #endif
+	ip_vs_pe_put(param.pe);
 	return 0;
 	/* Error exit */
 out:

[PATCH 3.14 64/79] ipvs: rerouting to local clients is not needed anymore

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

commit 579eb62ac35845686a7c4286c0a820b4eb1f96aa upstream.

commit f5a41847acc5 ("ipvs: move ip_route_me_harder for ICMP")
from 2.6.37 introduced ip_route_me_harder() call for responses to
local clients, so that we can provide valid rt_src after SNAT.
It was used by TCP to provide valid daddr for ip_send_reply().
After commit 0a5ebb8000c5 ("ipv4: Pass explicit daddr arg to
ip_send_reply()." from 3.0 this rerouting is not needed anymore
and should be avoided, especially in LOCAL_IN.

Fixes 3.12.33 crash in xfrm reported by Florian Wiessner:
"3.12.33 - BUG xfrm_selector_match+0x25/0x2f6"

Reported-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Tested-by: Smart Weblications GmbH - Florian Wiessner <f.wiessner@smart-weblications.de>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_core.c |   33 ++++++++++++++++++++++-----------
 1 file changed, 22 insertions(+), 11 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -658,16 +658,24 @@ static inline int ip_vs_gather_frags(str
 	return err;
 }
 
-static int ip_vs_route_me_harder(int af, struct sk_buff *skb)
+static int ip_vs_route_me_harder(int af, struct sk_buff *skb,
+				 unsigned int hooknum)
 {
+	if (!sysctl_snat_reroute(skb))
+		return 0;
+	/* Reroute replies only to remote clients (FORWARD and LOCAL_OUT) */
+	if (NF_INET_LOCAL_IN == hooknum)
+		return 0;
 #ifdef CONFIG_IP_VS_IPV6
 	if (af == AF_INET6) {
-		if (sysctl_snat_reroute(skb) && ip6_route_me_harder(skb) != 0)
+		struct dst_entry *dst = skb_dst(skb);
+
+		if (dst->dev && !(dst->dev->flags & IFF_LOOPBACK) &&
+		    ip6_route_me_harder(skb) != 0)
 			return 1;
 	} else
 #endif
-		if ((sysctl_snat_reroute(skb) ||
-		     skb_rtable(skb)->rt_flags & RTCF_LOCAL) &&
+		if (!(skb_rtable(skb)->rt_flags & RTCF_LOCAL) &&
 		    ip_route_me_harder(skb, RTN_LOCAL) != 0)
 			return 1;
 
@@ -790,7 +798,8 @@ static int handle_response_icmp(int af,
 				union nf_inet_addr *snet,
 				__u8 protocol, struct ip_vs_conn *cp,
 				struct ip_vs_protocol *pp,
-				unsigned int offset, unsigned int ihl)
+				unsigned int offset, unsigned int ihl,
+				unsigned int hooknum)
 {
 	unsigned int verdict = NF_DROP;
 
@@ -820,7 +829,7 @@ static int handle_response_icmp(int af,
 #endif
 		ip_vs_nat_icmp(skb, pp, cp, 1);
 
-	if (ip_vs_route_me_harder(af, skb))
+	if (ip_vs_route_me_harder(af, skb, hooknum))
 		goto out;
 
 	/* do the statistics and put it back */
@@ -915,7 +924,7 @@ static int ip_vs_out_icmp(struct sk_buff
 
 	snet.ip = iph->saddr;
 	return handle_response_icmp(AF_INET, skb, &snet, cih->protocol, cp,
-				    pp, ciph.len, ihl);
+				    pp, ciph.len, ihl, hooknum);
 }
 
 #ifdef CONFIG_IP_VS_IPV6
@@ -980,7 +989,8 @@ static int ip_vs_out_icmp_v6(struct sk_b
 	snet.in6 = ciph.saddr.in6;
 	writable = ciph.len;
 	return handle_response_icmp(AF_INET6, skb, &snet, ciph.protocol, cp,
-				    pp, writable, sizeof(struct ipv6hdr));
+				    pp, writable, sizeof(struct ipv6hdr),
+				    hooknum);
 }
 #endif
 
@@ -1039,7 +1049,8 @@ static inline bool is_new_conn(const str
  */
 static unsigned int
 handle_response(int af, struct sk_buff *skb, struct ip_vs_proto_data *pd,
-		struct ip_vs_conn *cp, struct ip_vs_iphdr *iph)
+		struct ip_vs_conn *cp, struct ip_vs_iphdr *iph,
+		unsigned int hooknum)
 {
 	struct ip_vs_protocol *pp = pd->pp;
 
@@ -1077,7 +1088,7 @@ handle_response(int af, struct sk_buff *
 	 * if it came from this machine itself.  So re-compute
 	 * the routing information.
 	 */
-	if (ip_vs_route_me_harder(af, skb))
+	if (ip_vs_route_me_harder(af, skb, hooknum))
 		goto drop;
 
 	IP_VS_DBG_PKT(10, af, pp, skb, 0, "After SNAT");
@@ -1180,7 +1191,7 @@ ip_vs_out(unsigned int hooknum, struct s
 	cp = pp->conn_out_get(af, skb, &iph, 0);
 
 	if (likely(cp))
-		return handle_response(af, skb, pd, cp, &iph);
+		return handle_response(af, skb, pd, cp, &iph, hooknum);
 	if (sysctl_nat_icmp_send(net) &&
 	    (pp->protocol == IPPROTO_TCP ||
 	     pp->protocol == IPPROTO_UDP ||

[PATCH 3.14 65/79] netfilter: nft_compat: fix module refcount underflow

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 520aa7414bb590f39d0d1591b06018e60cbc7cf4 upstream.

Feb 12 18:20:42 nfdev kernel: ------------[ cut here ]------------
Feb 12 18:20:42 nfdev kernel: WARNING: CPU: 4 PID: 4359 at kernel/module.c:963 module_put+0x9b/0xba()
Feb 12 18:20:42 nfdev kernel: CPU: 4 PID: 4359 Comm: ebtables-compat Tainted: G        W      3.19.0-rc6+ #43
[...]
Feb 12 18:20:42 nfdev kernel: Call Trace:
Feb 12 18:20:42 nfdev kernel: [<ffffffff815fd911>] dump_stack+0x4c/0x65
Feb 12 18:20:42 nfdev kernel: [<ffffffff8103e6f7>] warn_slowpath_common+0x9c/0xb6
Feb 12 18:20:42 nfdev kernel: [<ffffffff8109919f>] ? module_put+0x9b/0xba
Feb 12 18:20:42 nfdev kernel: [<ffffffff8103e726>] warn_slowpath_null+0x15/0x17
Feb 12 18:20:42 nfdev kernel: [<ffffffff8109919f>] module_put+0x9b/0xba
Feb 12 18:20:42 nfdev kernel: [<ffffffff813ecf7c>] nft_match_destroy+0x45/0x4c
Feb 12 18:20:42 nfdev kernel: [<ffffffff813e683f>] nf_tables_rule_destroy+0x28/0x70

Reported-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nft_compat.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/net/netfilter/nft_compat.c
+++ b/net/netfilter/nft_compat.c
@@ -611,8 +611,12 @@ nft_match_select_ops(const struct nft_ct
 		struct xt_match *match = nft_match->ops.data;
 
 		if (strcmp(match->name, mt_name) == 0 &&
-		    match->revision == rev && match->family == family)
+		    match->revision == rev && match->family == family) {
+			if (!try_module_get(match->me))
+				return ERR_PTR(-ENOENT);
+
 			return &nft_match->ops;
+		}
 	}
 
 	match = xt_request_find_match(family, mt_name, rev);
@@ -682,8 +686,12 @@ nft_target_select_ops(const struct nft_c
 		struct xt_target *target = nft_target->ops.data;
 
 		if (strcmp(target->name, tg_name) == 0 &&
-		    target->revision == rev && target->family == family)
+		    target->revision == rev && target->family == family) {
+			if (!try_module_get(target->me))
+				return ERR_PTR(-ENOENT);
+
 			return &nft_target->ops;
+		}
 	}
 
 	target = xt_request_find_target(family, tg_name, rev);

[PATCH 3.14 66/79] netfilter: xt_socket: fix a stack corruption bug

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <edumazet@google.com>

commit 78296c97ca1fd3b104f12e1f1fbc06c46635990b upstream.

As soon as extract_icmp6_fields() returns, its local storage (automatic
variables) is deallocated and can be overwritten.

Lets add an additional parameter to make sure storage is valid long
enough.

While we are at it, adds some const qualifiers.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: b64c9256a9b76 ("tproxy: added IPv6 support to the socket match")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_socket.c |   21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -243,12 +243,13 @@ static int
 extract_icmp6_fields(const struct sk_buff *skb,
 		     unsigned int outside_hdrlen,
 		     int *protocol,
-		     struct in6_addr **raddr,
-		     struct in6_addr **laddr,
+		     const struct in6_addr **raddr,
+		     const struct in6_addr **laddr,
 		     __be16 *rport,
-		     __be16 *lport)
+		     __be16 *lport,
+		     struct ipv6hdr *ipv6_var)
 {
-	struct ipv6hdr *inside_iph, _inside_iph;
+	const struct ipv6hdr *inside_iph;
 	struct icmp6hdr *icmph, _icmph;
 	__be16 *ports, _ports[2];
 	u8 inside_nexthdr;
@@ -263,12 +264,14 @@ extract_icmp6_fields(const struct sk_buf
 	if (icmph->icmp6_type & ICMPV6_INFOMSG_MASK)
 		return 1;
 
-	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph), sizeof(_inside_iph), &_inside_iph);
+	inside_iph = skb_header_pointer(skb, outside_hdrlen + sizeof(_icmph),
+					sizeof(*ipv6_var), ipv6_var);
 	if (inside_iph == NULL)
 		return 1;
 	inside_nexthdr = inside_iph->nexthdr;
 
-	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) + sizeof(_inside_iph),
+	inside_hdrlen = ipv6_skip_exthdr(skb, outside_hdrlen + sizeof(_icmph) +
+					      sizeof(*ipv6_var),
 					 &inside_nexthdr, &inside_fragoff);
 	if (inside_hdrlen < 0)
 		return 1; /* hjm: Packet has no/incomplete transport layer headers. */
@@ -315,10 +318,10 @@ xt_socket_get_sock_v6(struct net *net, c
 static bool
 socket_mt6_v1_v2(const struct sk_buff *skb, struct xt_action_param *par)
 {
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr ipv6_var, *iph = ipv6_hdr(skb);
 	struct udphdr _hdr, *hp = NULL;
 	struct sock *sk = skb->sk;
-	struct in6_addr *daddr = NULL, *saddr = NULL;
+	const struct in6_addr *daddr = NULL, *saddr = NULL;
 	__be16 uninitialized_var(dport), uninitialized_var(sport);
 	int thoff = 0, uninitialized_var(tproto);
 	const struct xt_socket_mtinfo1 *info = (struct xt_socket_mtinfo1 *) par->matchinfo;
@@ -342,7 +345,7 @@ socket_mt6_v1_v2(const struct sk_buff *s
 
 	} else if (tproto == IPPROTO_ICMPV6) {
 		if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
-					 &sport, &dport))
+					 &sport, &dport, &ipv6_var))
 			return false;
 	} else {
 		return false;

[PATCH 3.14 67/79] ARM: imx6sl-evk: set swbst_reg as vbuss parent reg

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@freescale.com>

commit 2de9dd0391a74e80922c1bc95a78cedf85bcdc9e upstream.

USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
parent reg, it fixed a bug that the voltage of vbus is incorrect
due to swbst_reg is disabled after boots up.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6sl-evk.dts |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -28,6 +28,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 0 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_otg2_vbus: usb_otg2_vbus {
@@ -37,6 +38,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio4 2 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 	};
 };

[PATCH 3.14 68/79] arm64: Honor __GFP_ZERO in dma allocations

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Suzuki K. Poulose" <suzuki.poulose@arm.com>

commit 7132813c384515c9dede1ae20e56f3895feb7f1e upstream.

Current implementation doesn't zero out the pages allocated.
Honor the __GFP_ZERO flag and zero out if set.

Cc: <stable@vger.kernel.org> # v3.14+
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/mm/dma-mapping.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/arm64/mm/dma-mapping.c
+++ b/arch/arm64/mm/dma-mapping.c
@@ -44,6 +44,7 @@ static void *arm64_swiotlb_alloc_coheren
 		flags |= GFP_DMA32;
 	if (IS_ENABLED(CONFIG_DMA_CMA)) {
 		struct page *page;
+		void *addr;
 
 		size = PAGE_ALIGN(size);
 		page = dma_alloc_from_contiguous(dev, size >> PAGE_SHIFT,
@@ -52,7 +53,10 @@ static void *arm64_swiotlb_alloc_coheren
 			return NULL;
 
 		*dma_handle = phys_to_dma(dev, page_to_phys(page));
-		return page_address(page);
+		addr = page_address(page);
+		if (flags & __GFP_ZERO)
+			memset(addr, 0, size);
+		return addr;
 	} else {
 		return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
 	}

[PATCH 3.14 69/79] ARM: imx6qdl-sabresd: set swbst_reg as vbuss parent reg

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Chen <peter.chen@freescale.com>

commit 40f737791d4dab26bf23a6331609c604142228bd upstream.

USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's
parent reg, it fixed a bug that the voltage of vbus is incorrect
due to swbst_reg is disabled after boots up.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -25,6 +25,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio3 22 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_usb_h1_vbus: usb_h1_vbus {
@@ -34,6 +35,7 @@
 			regulator-max-microvolt = <5000000>;
 			gpio = <&gpio1 29 0>;
 			enable-active-high;
+			vin-supply = <&swbst_reg>;
 		};
 
 		reg_audio: wm8962_supply {

[PATCH 3.14 70/79] ARM: at91: pm: fix at91rm9200 standby

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Belloni <alexandre.belloni@free-electrons.com>

commit 84e871660bebfddb9a62ebd6f19d02536e782f0a upstream.

at91rm9200 standby and suspend to ram has been broken since
00482a4078f4. It is wrongly using AT91_BASE_SYS which is a physical address
and actually doesn't correspond to any register on at91rm9200.

Use the correct at91_ramc_base[0] instead.

Fixes: 00482a4078f4 (ARM: at91: implement the standby function for pm/cpuidle)

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-at91/pm.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -45,7 +45,7 @@ static inline void at91rm9200_standby(vo
 		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
 		"    str    %5, [%1, %2]"
 		:
-		: "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
+		: "r" (0), "r" (at91_ramc_base[0]), "r" (AT91RM9200_SDRAMC_LPR),
 		  "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
 		  "r" (lpr));
 }

[PATCH 3.14 71/79] ARM: dts: DRA7x: Fix the bypass clock source for dpll_iva and others

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ravikumar Kattekola <rk@ti.com>

commit d2192ea09858a8535b056fcede1a41d824e0b3d8 upstream.

Fixes: ee6c750761 (ARM: dts: dra7 clock data)

On DRA7x, For DPLL_IVA, the ref clock(CLKINP) is connected to sys_clk1 and
the bypass input(CLKINPULOW) is connected to iva_dpll_hs_clk_div clock.
But the bypass input is not directly routed to bypass clkout instead
both CLKINP and CLKINPULOW are connected to bypass clkout via a mux.

This mux is controlled by the bit - CM_CLKSEL_DPLL_IVA[23]:DPLL_BYP_CLKSEL
and it's POR value is zero which selects the CLKINP as bypass clkout.
which means iva_dpll_hs_clk_div is not the bypass clock for dpll_iva_ck

Fix this by adding another mux clock as parent in bypass mode.

This design is common to most of the PLLs and the rest have only one bypass
clock. Below is a list of the DPLLs that need this fix:

DPLL_IVA, DPLL_DDR,
DPLL_DSP, DPLL_EVE,
DPLL_GMAC, DPLL_PER,
DPLL_USB and DPLL_CORE

Signed-off-by: Ravikumar Kattekola <rk@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/dra7xx-clocks.dtsi |   90 +++++++++++++++++++++++++++++++----
 1 file changed, 81 insertions(+), 9 deletions(-)

--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -243,10 +243,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_core_byp_mux: dpll_core_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x012c>;
+	};
+
 	dpll_core_ck: dpll_core_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-core-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_core_byp_mux>;
 		reg = <0x0120>, <0x0124>, <0x012c>, <0x0128>;
 	};
 
@@ -309,10 +317,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_dsp_byp_mux: dpll_dsp_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0240>;
+	};
+
 	dpll_dsp_ck: dpll_dsp_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dsp_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_dsp_byp_mux>;
 		reg = <0x0234>, <0x0238>, <0x0240>, <0x023c>;
 	};
 
@@ -335,10 +351,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_iva_byp_mux: dpll_iva_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x01ac>;
+	};
+
 	dpll_iva_ck: dpll_iva_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&iva_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_iva_byp_mux>;
 		reg = <0x01a0>, <0x01a4>, <0x01ac>, <0x01a8>;
 	};
 
@@ -361,10 +385,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_gpu_byp_mux: dpll_gpu_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02e4>;
+	};
+
 	dpll_gpu_ck: dpll_gpu_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gpu_byp_mux>;
 		reg = <0x02d8>, <0x02dc>, <0x02e4>, <0x02e0>;
 	};
 
@@ -398,10 +430,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_ddr_byp_mux: dpll_ddr_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x021c>;
+	};
+
 	dpll_ddr_ck: dpll_ddr_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_ddr_byp_mux>;
 		reg = <0x0210>, <0x0214>, <0x021c>, <0x0218>;
 	};
 
@@ -416,10 +456,18 @@
 		ti,invert-autoidle-bit;
 	};
 
+	dpll_gmac_byp_mux: dpll_gmac_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		ti,bit-shift = <23>;
+		reg = <0x02b4>;
+	};
+
 	dpll_gmac_ck: dpll_gmac_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&dpll_abe_m3x2_ck>;
+		clocks = <&sys_clkin1>, <&dpll_gmac_byp_mux>;
 		reg = <0x02a8>, <0x02ac>, <0x02b4>, <0x02b0>;
 	};
 
@@ -482,10 +530,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_eve_byp_mux: dpll_eve_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x0290>;
+	};
+
 	dpll_eve_ck: dpll_eve_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&eve_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_eve_byp_mux>;
 		reg = <0x0284>, <0x0288>, <0x0290>, <0x028c>;
 	};
 
@@ -1214,10 +1270,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_per_byp_mux: dpll_per_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x014c>;
+	};
+
 	dpll_per_ck: dpll_per_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-clock";
-		clocks = <&sys_clkin1>, <&per_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_per_byp_mux>;
 		reg = <0x0140>, <0x0144>, <0x014c>, <0x0148>;
 	};
 
@@ -1240,10 +1304,18 @@
 		clock-div = <1>;
 	};
 
+	dpll_usb_byp_mux: dpll_usb_byp_mux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		ti,bit-shift = <23>;
+		reg = <0x018c>;
+	};
+
 	dpll_usb_ck: dpll_usb_ck {
 		#clock-cells = <0>;
 		compatible = "ti,omap4-dpll-j-type-clock";
-		clocks = <&sys_clkin1>, <&usb_dpll_hs_clk_div>;
+		clocks = <&sys_clkin1>, <&dpll_usb_byp_mux>;
 		reg = <0x0180>, <0x0184>, <0x018c>, <0x0188>;
 	};
 

[PATCH 3.14 72/79] target: Fix reference leak in target_get_sess_cmd() error path

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@sandisk.com>

commit 7544e597343e2166daba3f32e4708533aa53c233 upstream.

This patch fixes a se_cmd->cmd_kref leak buf when se_sess->sess_tearing_down
is true within target_get_sess_cmd() submission path code.

This se_cmd reference leak can occur during active session shutdown when
ack_kref=1 is passed by target_submit_cmd_[map_sgls,tmr]() callers.

Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_transport.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -2327,6 +2327,10 @@ int target_get_sess_cmd(struct se_sessio
 	list_add_tail(&se_cmd->se_cmd_list, &se_sess->sess_cmd_list);
 out:
 	spin_unlock_irqrestore(&se_sess->sess_cmd_lock, flags);
+
+	if (ret && ack_kref)
+		target_put_sess_cmd(se_sess, se_cmd);
+
 	return ret;
 }
 EXPORT_SYMBOL(target_get_sess_cmd);

[PATCH 3.14 73/79] target: Fix virtual LUN=0 target_configure_device failure OOPs

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 5f7da044f8bc1cfb21c962edf34bd5699a76e7ae upstream.

This patch fixes a NULL pointer dereference triggered by a late
target_configure_device() -> alloc_workqueue() failure that results
in target_free_device() being called with DF_CONFIGURED already set,
which subsequently OOPses in destroy_workqueue() code.

Currently this only happens at modprobe target_core_mod time when
core_dev_setup_virtual_lun0() -> target_configure_device() fails,
and the explicit target_free_device() gets called.

To address this bug originally introduced by commit 0fd97ccf45, go
ahead and move DF_CONFIGURED to end of target_configure_device()
code to handle this special failure case.

Reported-by: Claudio Fleiner <cmf@daterainc.com>
Cc: Claudio Fleiner <cmf@daterainc.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_device.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1591,8 +1591,6 @@ int target_configure_device(struct se_de
 	ret = dev->transport->configure_device(dev);
 	if (ret)
 		goto out;
-	dev->dev_flags |= DF_CONFIGURED;
-
 	/*
 	 * XXX: there is not much point to have two different values here..
 	 */
@@ -1654,6 +1652,8 @@ int target_configure_device(struct se_de
 	list_add_tail(&dev->g_dev_node, &g_device_list);
 	mutex_unlock(&g_device_mutex);
 
+	dev->dev_flags |= DF_CONFIGURED;
+
 	return 0;
 
 out_free_alua:

[PATCH 3.14 74/79] iscsi-target: Avoid early conn_logout_comp for iser connections

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit f068fbc82e7696d67b1bb8189306865bedf368b6 upstream.

This patch fixes a iser specific logout bug where early complete()
of conn->conn_logout_comp in iscsit_close_connection() was causing
isert_wait4logout() to complete too soon, triggering a use after
free NULL pointer dereference of iscsi_conn memory.

The complete() was originally added for traditional iscsi-target
when a ISCSI_LOGOUT_OP failed in iscsi_target_rx_opcode(), but given
iser-target does not wait in logout failure, this special case needs
to be avoided.

Reported-by: Sagi Grimberg <sagig@mellanox.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Slava Shwartsman <valyushash@gmail.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/iscsi/iscsi_target.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -4196,11 +4196,17 @@ int iscsit_close_connection(
 	pr_debug("Closing iSCSI connection CID %hu on SID:"
 		" %u\n", conn->cid, sess->sid);
 	/*
-	 * Always up conn_logout_comp just in case the RX Thread is sleeping
-	 * and the logout response never got sent because the connection
-	 * failed.
+	 * Always up conn_logout_comp for the traditional TCP case just in case
+	 * the RX Thread in iscsi_target_rx_opcode() is sleeping and the logout
+	 * response never got sent because the connection failed.
+	 *
+	 * However for iser-target, isert_wait4logout() is using conn_logout_comp
+	 * to signal logout response TX interrupt completion.  Go ahead and skip
+	 * this for iser since isert_rx_opcode() does not wait on logout failure,
+	 * and to avoid iscsi_conn pointer dereference in iser-target code.
 	 */
-	complete(&conn->conn_logout_comp);
+	if (conn->conn_transport->transport_type == ISCSI_TCP)
+		complete(&conn->conn_logout_comp);
 
 	iscsi_release_thread_set(conn);
 

[PATCH 3.14 75/79] target/pscsi: Fix NULL pointer dereference in get_device_type

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 215a8fe4198f607f34ecdbc9969dae783d8b5a61 upstream.

This patch fixes a NULL pointer dereference OOPs with pSCSI backends
within target_core_stat.c code.  The bug is caused by a configfs attr
read if no pscsi_dev_virt->pdv_sd has been configured.

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pscsi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/target/target_core_pscsi.c
+++ b/drivers/target/target_core_pscsi.c
@@ -1111,7 +1111,7 @@ static u32 pscsi_get_device_type(struct
 	struct pscsi_dev_virt *pdv = PSCSI_DEV(dev);
 	struct scsi_device *sd = pdv->pdv_sd;
 
-	return sd->type;
+	return (sd) ? sd->type : TYPE_NO_LUN;
 }
 
 static sector_t pscsi_get_blocks(struct se_device *dev)

[PATCH 3.14 76/79] target: Fix R_HOLDER bit usage for AllRegistrants

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit d16ca7c5198fd668db10d2c7b048ed3359c12c54 upstream.

This patch fixes the usage of R_HOLDER bit for an All Registrants
reservation in READ_FULL_STATUS, where only the registration who
issued RESERVE was being reported as having an active reservation.

It changes core_scsi3_pri_read_full_status() to check ahead of the
list walk of active registrations to see if All Registrants is active,
and if so set R_HOLDER bit and scope/type fields for all active
registrations.

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pr.c |   26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -3855,7 +3855,8 @@ core_scsi3_pri_read_full_status(struct s
 	unsigned char *buf;
 	u32 add_desc_len = 0, add_len = 0, desc_len, exp_desc_len;
 	u32 off = 8; /* off into first Full Status descriptor */
-	int format_code = 0;
+	int format_code = 0, pr_res_type = 0, pr_res_scope = 0;
+	bool all_reg = false;
 
 	if (cmd->data_length < 8) {
 		pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u"
@@ -3872,6 +3873,19 @@ core_scsi3_pri_read_full_status(struct s
 	buf[2] = ((dev->t10_pr.pr_generation >> 8) & 0xff);
 	buf[3] = (dev->t10_pr.pr_generation & 0xff);
 
+	spin_lock(&dev->dev_reservation_lock);
+	if (dev->dev_pr_res_holder) {
+		struct t10_pr_registration *pr_holder = dev->dev_pr_res_holder;
+
+		if (pr_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG ||
+		    pr_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG) {
+			all_reg = true;
+			pr_res_type = pr_holder->pr_res_type;
+			pr_res_scope = pr_holder->pr_res_scope;
+		}
+	}
+	spin_unlock(&dev->dev_reservation_lock);
+
 	spin_lock(&pr_tmpl->registration_lock);
 	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
 			&pr_tmpl->registration_list, pr_reg_list) {
@@ -3921,14 +3935,20 @@ core_scsi3_pri_read_full_status(struct s
 		 * reservation holder for PR_HOLDER bit.
 		 *
 		 * Also, if this registration is the reservation
-		 * holder, fill in SCOPE and TYPE in the next byte.
+		 * holder or there is an All Registrants reservation
+		 * active, fill in SCOPE and TYPE in the next byte.
 		 */
 		if (pr_reg->pr_res_holder) {
 			buf[off++] |= 0x01;
 			buf[off++] = (pr_reg->pr_res_scope & 0xf0) |
 				     (pr_reg->pr_res_type & 0x0f);
-		} else
+		} else if (all_reg) {
+			buf[off++] |= 0x01;
+			buf[off++] = (pr_res_scope & 0xf0) |
+				     (pr_res_type & 0x0f);
+		} else {
 			off += 2;
+		}
 
 		off += 4; /* Skip over reserved area */
 		/*

[PATCH 3.14 77/79] target: Avoid dropping AllRegistrants reservation during unregister

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit 6c3c9baa0debeb4bcc52a78c4463a0a97518de10 upstream.

This patch fixes an issue with AllRegistrants reservations where
an unregister operation by the I_T nexus reservation holder would
incorrectly drop the reservation, instead of waiting until the
last active I_T nexus is unregistered as per SPC-4.

This includes updating __core_scsi3_complete_pro_release() to reset
dev->dev_pr_res_holder with another pr_reg for this special case,
as well as a new 'unreg' parameter to determine when the release
is occuring from an implicit unregister, vs. explicit RELEASE.

It also adds special handling in core_scsi3_free_pr_reg_from_nacl()
to release the left-over pr_res_holder, now that pr_reg is deleted
from pr_reg_list within __core_scsi3_complete_pro_release().

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pr.c |   89 +++++++++++++++++++++++++++++-----------
 1 file changed, 66 insertions(+), 23 deletions(-)

--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -76,7 +76,7 @@ enum preempt_type {
 };
 
 static void __core_scsi3_complete_pro_release(struct se_device *, struct se_node_acl *,
-			struct t10_pr_registration *, int);
+					      struct t10_pr_registration *, int, int);
 
 static sense_reason_t
 target_scsi2_reservation_check(struct se_cmd *cmd)
@@ -1186,7 +1186,7 @@ static int core_scsi3_check_implicit_rel
 		 *    service action with the SERVICE ACTION RESERVATION KEY
 		 *    field set to zero (see 5.7.11.3).
 		 */
-		__core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0);
+		__core_scsi3_complete_pro_release(dev, nacl, pr_reg, 0, 1);
 		ret = 1;
 		/*
 		 * For 'All Registrants' reservation types, all existing
@@ -1228,7 +1228,8 @@ static void __core_scsi3_free_registrati
 
 	pr_reg->pr_reg_deve->def_pr_registered = 0;
 	pr_reg->pr_reg_deve->pr_res_key = 0;
-	list_del(&pr_reg->pr_reg_list);
+	if (!list_empty(&pr_reg->pr_reg_list))
+		list_del(&pr_reg->pr_reg_list);
 	/*
 	 * Caller accessing *pr_reg using core_scsi3_locate_pr_reg(),
 	 * so call core_scsi3_put_pr_reg() to decrement our reference.
@@ -1280,6 +1281,7 @@ void core_scsi3_free_pr_reg_from_nacl(
 {
 	struct t10_reservation *pr_tmpl = &dev->t10_pr;
 	struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_res_holder;
+	bool free_reg = false;
 	/*
 	 * If the passed se_node_acl matches the reservation holder,
 	 * release the reservation.
@@ -1287,13 +1289,18 @@ void core_scsi3_free_pr_reg_from_nacl(
 	spin_lock(&dev->dev_reservation_lock);
 	pr_res_holder = dev->dev_pr_res_holder;
 	if ((pr_res_holder != NULL) &&
-	    (pr_res_holder->pr_reg_nacl == nacl))
-		__core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0);
+	    (pr_res_holder->pr_reg_nacl == nacl)) {
+		__core_scsi3_complete_pro_release(dev, nacl, pr_res_holder, 0, 1);
+		free_reg = true;
+	}
 	spin_unlock(&dev->dev_reservation_lock);
 	/*
 	 * Release any registration associated with the struct se_node_acl.
 	 */
 	spin_lock(&pr_tmpl->registration_lock);
+	if (pr_res_holder && free_reg)
+		__core_scsi3_free_registration(dev, pr_res_holder, NULL, 0);
+
 	list_for_each_entry_safe(pr_reg, pr_reg_tmp,
 			&pr_tmpl->registration_list, pr_reg_list) {
 
@@ -1316,7 +1323,7 @@ void core_scsi3_free_all_registrations(
 	if (pr_res_holder != NULL) {
 		struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
 		__core_scsi3_complete_pro_release(dev, pr_res_nacl,
-				pr_res_holder, 0);
+						  pr_res_holder, 0, 0);
 	}
 	spin_unlock(&dev->dev_reservation_lock);
 
@@ -2126,13 +2133,13 @@ core_scsi3_emulate_pro_register(struct s
 		/*
 		 * sa_res_key=0 Unregister Reservation Key for registered I_T Nexus.
 		 */
-		pr_holder = core_scsi3_check_implicit_release(
-				cmd->se_dev, pr_reg);
+		type = pr_reg->pr_res_type;
+		pr_holder = core_scsi3_check_implicit_release(cmd->se_dev,
+							      pr_reg);
 		if (pr_holder < 0) {
 			ret = TCM_RESERVATION_CONFLICT;
 			goto out;
 		}
-		type = pr_reg->pr_res_type;
 
 		spin_lock(&pr_tmpl->registration_lock);
 		/*
@@ -2406,23 +2413,59 @@ static void __core_scsi3_complete_pro_re
 	struct se_device *dev,
 	struct se_node_acl *se_nacl,
 	struct t10_pr_registration *pr_reg,
-	int explicit)
+	int explicit,
+	int unreg)
 {
 	struct target_core_fabric_ops *tfo = se_nacl->se_tpg->se_tpg_tfo;
 	char i_buf[PR_REG_ISID_ID_LEN];
+	int pr_res_type = 0, pr_res_scope = 0;
 
 	memset(i_buf, 0, PR_REG_ISID_ID_LEN);
 	core_pr_dump_initiator_port(pr_reg, i_buf, PR_REG_ISID_ID_LEN);
 	/*
 	 * Go ahead and release the current PR reservation holder.
-	 */
-	dev->dev_pr_res_holder = NULL;
+	 * If an All Registrants reservation is currently active and
+	 * a unregister operation is requested, replace the current
+	 * dev_pr_res_holder with another active registration.
+	 */
+	if (dev->dev_pr_res_holder) {
+		pr_res_type = dev->dev_pr_res_holder->pr_res_type;
+		pr_res_scope = dev->dev_pr_res_holder->pr_res_scope;
+		dev->dev_pr_res_holder->pr_res_type = 0;
+		dev->dev_pr_res_holder->pr_res_scope = 0;
+		dev->dev_pr_res_holder->pr_res_holder = 0;
+		dev->dev_pr_res_holder = NULL;
+	}
+	if (!unreg)
+		goto out;
 
-	pr_debug("SPC-3 PR [%s] Service Action: %s RELEASE cleared"
-		" reservation holder TYPE: %s ALL_TG_PT: %d\n",
-		tfo->get_fabric_name(), (explicit) ? "explicit" : "implicit",
-		core_scsi3_pr_dump_type(pr_reg->pr_res_type),
-		(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	spin_lock(&dev->t10_pr.registration_lock);
+	list_del_init(&pr_reg->pr_reg_list);
+	/*
+	 * If the I_T nexus is a reservation holder, the persistent reservation
+	 * is of an all registrants type, and the I_T nexus is the last remaining
+	 * registered I_T nexus, then the device server shall also release the
+	 * persistent reservation.
+	 */
+	if (!list_empty(&dev->t10_pr.registration_list) &&
+	    ((pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) ||
+	     (pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG))) {
+		dev->dev_pr_res_holder =
+			list_entry(dev->t10_pr.registration_list.next,
+				   struct t10_pr_registration, pr_reg_list);
+		dev->dev_pr_res_holder->pr_res_type = pr_res_type;
+		dev->dev_pr_res_holder->pr_res_scope = pr_res_scope;
+		dev->dev_pr_res_holder->pr_res_holder = 1;
+	}
+	spin_unlock(&dev->t10_pr.registration_lock);
+out:
+	if (!dev->dev_pr_res_holder) {
+		pr_debug("SPC-3 PR [%s] Service Action: %s RELEASE cleared"
+			" reservation holder TYPE: %s ALL_TG_PT: %d\n",
+			tfo->get_fabric_name(), (explicit) ? "explicit" :
+			"implicit", core_scsi3_pr_dump_type(pr_res_type),
+			(pr_reg->pr_reg_all_tg_pt) ? 1 : 0);
+	}
 	pr_debug("SPC-3 PR [%s] RELEASE Node: %s%s\n",
 		tfo->get_fabric_name(), se_nacl->initiatorname,
 		i_buf);
@@ -2553,7 +2596,7 @@ core_scsi3_emulate_pro_release(struct se
 	 *    server shall not establish a unit attention condition.
 	 */
 	__core_scsi3_complete_pro_release(dev, se_sess->se_node_acl,
-			pr_reg, 1);
+					  pr_reg, 1, 0);
 
 	spin_unlock(&dev->dev_reservation_lock);
 
@@ -2641,7 +2684,7 @@ core_scsi3_emulate_pro_clear(struct se_c
 	if (pr_res_holder) {
 		struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
 		__core_scsi3_complete_pro_release(dev, pr_res_nacl,
-			pr_res_holder, 0);
+						  pr_res_holder, 0, 0);
 	}
 	spin_unlock(&dev->dev_reservation_lock);
 	/*
@@ -2700,7 +2743,7 @@ static void __core_scsi3_complete_pro_pr
 	 */
 	if (dev->dev_pr_res_holder)
 		__core_scsi3_complete_pro_release(dev, nacl,
-				dev->dev_pr_res_holder, 0);
+						  dev->dev_pr_res_holder, 0, 0);
 
 	dev->dev_pr_res_holder = pr_reg;
 	pr_reg->pr_res_holder = 1;
@@ -2944,8 +2987,8 @@ core_scsi3_pro_preempt(struct se_cmd *cm
 	 */
 	if (pr_reg_n != pr_res_holder)
 		__core_scsi3_complete_pro_release(dev,
-				pr_res_holder->pr_reg_nacl,
-				dev->dev_pr_res_holder, 0);
+						  pr_res_holder->pr_reg_nacl,
+						  dev->dev_pr_res_holder, 0, 0);
 	/*
 	 * b) Remove the registrations for all I_T nexuses identified
 	 *    by the SERVICE ACTION RESERVATION KEY field, except the
@@ -3415,7 +3458,7 @@ after_iport_check:
 	 *    holder (i.e., the I_T nexus on which the
 	 */
 	__core_scsi3_complete_pro_release(dev, pr_res_nacl,
-			dev->dev_pr_res_holder, 0);
+					  dev->dev_pr_res_holder, 0, 0);
 	/*
 	 * g) Move the persistent reservation to the specified I_T nexus using
 	 *    the same scope and type as the persistent reservation released in

[PATCH 3.14 78/79] target: Allow AllRegistrants to re-RESERVE existing reservation

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit ae450e246e8540300699480a3780a420a028b73f upstream.

This patch changes core_scsi3_pro_release() logic to allow an
existing AllRegistrants type reservation to be re-reserved by
any registered I_T nexus.

This addresses a issue where AllRegistrants type RESERVE was
receiving RESERVATION_CONFLICT status if dev_pr_res_holder did
not match the same I_T nexus, instead of just returning GOOD
status following spc4r34 Section 5.9.9:

"If the device server receives a PERSISTENT RESERVE OUT command
 with RESERVE service action where the TYPE field and the SCOPE
 field contain the same values as the existing type and scope
 from a persistent reservation holder, it shall not make any
 change to the existing persistent reservation and shall complete
 the command with GOOD status."

Reported-by: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Ilias Tsitsimpis <i.tsitsimpis@gmail.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pr.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -2297,6 +2297,7 @@ core_scsi3_pro_reserve(struct se_cmd *cm
 	spin_lock(&dev->dev_reservation_lock);
 	pr_res_holder = dev->dev_pr_res_holder;
 	if (pr_res_holder) {
+		int pr_res_type = pr_res_holder->pr_res_type;
 		/*
 		 * From spc4r17 Section 5.7.9: Reserving:
 		 *
@@ -2307,7 +2308,9 @@ core_scsi3_pro_reserve(struct se_cmd *cm
 		 * the logical unit, then the command shall be completed with
 		 * RESERVATION CONFLICT status.
 		 */
-		if (pr_res_holder != pr_reg) {
+		if ((pr_res_holder != pr_reg) &&
+		    (pr_res_type != PR_TYPE_WRITE_EXCLUSIVE_ALLREG) &&
+		    (pr_res_type != PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) {
 			struct se_node_acl *pr_res_nacl = pr_res_holder->pr_reg_nacl;
 			pr_err("SPC-3 PR: Attempted RESERVE from"
 				" [%s]: %s while reservation already held by"

[PATCH 3.14 79/79] target: Allow Write Exclusive non-reservation holders to READ

[Greg Kroah-Hartman]

3.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lee Duncan <lduncan@suse.com>

commit 1ecc7586922662e3ca2f3f0c3f17fec8749fc621 upstream.

For PGR reservation of type Write Exclusive Access, allow all non
reservation holding I_T nexuses with active registrations to READ
from the device.

This addresses a bug where active registrations that attempted
to READ would result in an reservation conflict.

Signed-off-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_pr.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -528,6 +528,18 @@ static int core_scsi3_pr_seq_non_holder(
 
 			return 0;
 		}
+       } else if (we && registered_nexus) {
+               /*
+                * Reads are allowed for Write Exclusive locks
+                * from all registrants.
+                */
+               if (cmd->data_direction == DMA_FROM_DEVICE) {
+                       pr_debug("Allowing READ CDB: 0x%02x for %s"
+                               " reservation\n", cdb[0],
+                               core_scsi3_pr_dump_type(pr_reg_type));
+
+                       return 0;
+               }
 	}
 	pr_debug("%s Conflict for %sregistered nexus %s CDB: 0x%2x"
 		" for %s reservation\n", transport_dump_cmd_direction(cmd),

Re: [PATCH 3.14 00/79] 3.14.37-stable review

[Guenter Roeck]

On 03/24/2015 08:45 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.14.37 release.
> There are 79 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
> Anything received after that time might be too late.
>

Build results:
	total: 123 pass: 120 fail: 3
Failed builds:
	arm:imx_v6_v7_defconfig
	arm:multi_v7_defconfig
	arm:imx_v4_v5_defconfig

Qemu test results:
	total: 30 pass: 30 fail: 0

--------------
Build error log:

ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
ERROR: Input tree has errors, aborting (use -f to force output)
make[1]: *** [arch/arm/boot/dts/imx6dl-sabresd.dtb] Error 2
make[1]: *** Waiting for unfinished jobs....
make: *** [dtbs] Error 2

Caused by 'ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg'
and 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.

swbst_reg was only introduced with commit 4b444bb82fa8 ("ARM: dts:
imx6qdl-sabresd: Add PFUZE100 support"). Unfortunately, that patch
does not apply cleanly.

--------------


Details are available at http://server.roeck-us.net:8010/builders.

Guenter

Re: [PATCH 3.14 00/79] 3.14.37-stable review

[Greg Kroah-Hartman]

On Tue, Mar 24, 2015 at 07:50:07PM -0700, Guenter Roeck wrote:
> On 03/24/2015 08:45 AM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.14.37 release.
> >There are 79 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
> >Anything received after that time might be too late.
> >
> 
> Build results:
> 	total: 123 pass: 120 fail: 3
> Failed builds:
> 	arm:imx_v6_v7_defconfig
> 	arm:multi_v7_defconfig
> 	arm:imx_v4_v5_defconfig
> 
> Qemu test results:
> 	total: 30 pass: 30 fail: 0
> 
> --------------
> Build error log:
> 
> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
> ERROR: Input tree has errors, aborting (use -f to force output)
> make[1]: *** [arch/arm/boot/dts/imx6dl-sabresd.dtb] Error 2
> make[1]: *** Waiting for unfinished jobs....
> make: *** [dtbs] Error 2
> 
> Caused by 'ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg'
> and 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.
> 
> swbst_reg was only introduced with commit 4b444bb82fa8 ("ARM: dts:
> imx6qdl-sabresd: Add PFUZE100 support"). Unfortunately, that patch
> does not apply cleanly.

Thanks, I've now dropped that patch from the queue.

greg k-h

Re: [PATCH 3.14 00/79] 3.14.37-stable review

[Guenter Roeck]

On 03/25/2015 01:30 AM, Greg Kroah-Hartman wrote:
> On Tue, Mar 24, 2015 at 07:50:07PM -0700, Guenter Roeck wrote:
>> On 03/24/2015 08:45 AM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 3.14.37 release.
>>> There are 79 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
>>> Anything received after that time might be too late.
>>>
>>
>> Build results:
>> 	total: 123 pass: 120 fail: 3
>> Failed builds:
>> 	arm:imx_v6_v7_defconfig
>> 	arm:multi_v7_defconfig
>> 	arm:imx_v4_v5_defconfig
>>
>> Qemu test results:
>> 	total: 30 pass: 30 fail: 0
>>
>> --------------
>> Build error log:
>>
>> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
>> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
>> ERROR: Input tree has errors, aborting (use -f to force output)
>> make[1]: *** [arch/arm/boot/dts/imx6dl-sabresd.dtb] Error 2
>> make[1]: *** Waiting for unfinished jobs....
>> make: *** [dtbs] Error 2
>>
>> Caused by 'ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg'
>> and 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.
>>
>> swbst_reg was only introduced with commit 4b444bb82fa8 ("ARM: dts:
>> imx6qdl-sabresd: Add PFUZE100 support"). Unfortunately, that patch
>> does not apply cleanly.
>
> Thanks, I've now dropped that patch from the queue.
>

Two patches, not just one.

Guenter

Re: [PATCH 3.14 00/79] 3.14.37-stable review

[Guenter Roeck]

On 03/25/2015 06:03 AM, Guenter Roeck wrote:
> On 03/25/2015 01:30 AM, Greg Kroah-Hartman wrote:
>> On Tue, Mar 24, 2015 at 07:50:07PM -0700, Guenter Roeck wrote:
>>> On 03/24/2015 08:45 AM, Greg Kroah-Hartman wrote:
>>>> This is the start of the stable review cycle for the 3.14.37 release.
>>>> There are 79 patches in this series, all will be posted as a response
>>>> to this one.  If anyone has any issues with these being applied, please
>>>> let me know.
>>>>
>>>> Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
>>>> Anything received after that time might be too late.
>>>>
>>>
>>> Build results:
>>>     total: 123 pass: 120 fail: 3
>>> Failed builds:
>>>     arm:imx_v6_v7_defconfig
>>>     arm:multi_v7_defconfig
>>>     arm:imx_v4_v5_defconfig
>>>
>>> Qemu test results:
>>>     total: 30 pass: 30 fail: 0
>>>
>>> --------------
>>> Build error log:
>>>
>>> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
>>> ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
>>> ERROR: Input tree has errors, aborting (use -f to force output)
>>> make[1]: *** [arch/arm/boot/dts/imx6dl-sabresd.dtb] Error 2
>>> make[1]: *** Waiting for unfinished jobs....
>>> make: *** [dtbs] Error 2
>>>
>>> Caused by 'ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg'
>>> and 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.
>>>
>>> swbst_reg was only introduced with commit 4b444bb82fa8 ("ARM: dts:
>>> imx6qdl-sabresd: Add PFUZE100 support"). Unfortunately, that patch
>>> does not apply cleanly.
>>
>> Thanks, I've now dropped that patch from the queue.
>>
>
> Two patches, not just one.
>

Yep, you still need to drop 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.

Guenter

Re: [PATCH 3.14 00/79] 3.14.37-stable review

[Greg Kroah-Hartman]

On Wed, Mar 25, 2015 at 06:07:45AM -0700, Guenter Roeck wrote:
> On 03/25/2015 06:03 AM, Guenter Roeck wrote:
> >On 03/25/2015 01:30 AM, Greg Kroah-Hartman wrote:
> >>On Tue, Mar 24, 2015 at 07:50:07PM -0700, Guenter Roeck wrote:
> >>>On 03/24/2015 08:45 AM, Greg Kroah-Hartman wrote:
> >>>>This is the start of the stable review cycle for the 3.14.37 release.
> >>>>There are 79 patches in this series, all will be posted as a response
> >>>>to this one.  If anyone has any issues with these being applied, please
> >>>>let me know.
> >>>>
> >>>>Responses should be made by Thu Mar 26 15:43:19 UTC 2015.
> >>>>Anything received after that time might be too late.
> >>>>
> >>>
> >>>Build results:
> >>>    total: 123 pass: 120 fail: 3
> >>>Failed builds:
> >>>    arm:imx_v6_v7_defconfig
> >>>    arm:multi_v7_defconfig
> >>>    arm:imx_v4_v5_defconfig
> >>>
> >>>Qemu test results:
> >>>    total: 30 pass: 30 fail: 0
> >>>
> >>>--------------
> >>>Build error log:
> >>>
> >>>ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
> >>>ERROR (phandle_references): Reference to non-existent node or label "swbst_reg"
> >>>ERROR: Input tree has errors, aborting (use -f to force output)
> >>>make[1]: *** [arch/arm/boot/dts/imx6dl-sabresd.dtb] Error 2
> >>>make[1]: *** Waiting for unfinished jobs....
> >>>make: *** [dtbs] Error 2
> >>>
> >>>Caused by 'ARM: imx6qdl-sabresd: set swbst_reg as vbus's parent reg'
> >>>and 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.
> >>>
> >>>swbst_reg was only introduced with commit 4b444bb82fa8 ("ARM: dts:
> >>>imx6qdl-sabresd: Add PFUZE100 support"). Unfortunately, that patch
> >>>does not apply cleanly.
> >>
> >>Thanks, I've now dropped that patch from the queue.
> >>
> >
> >Two patches, not just one.
> >
> 
> Yep, you still need to drop 'ARM: imx6sl-evk: set swbst_reg as vbus's parent reg'.

Thanks, now dropped.

greg k-h