From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752251AbbCXWPK (ORCPT ); Tue, 24 Mar 2015 18:15:10 -0400 Received: from down.free-electrons.com ([37.187.137.238]:53735 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751803AbbCXWPH (ORCPT ); Tue, 24 Mar 2015 18:15:07 -0400 Date: Tue, 24 Mar 2015 15:14:28 -0700 From: Maxime Ripard To: Thomas =?iso-8859-1?Q?Niederpr=FCm?= Cc: plagnioj@jcrosoft.com, tomi.valkeinen@ti.com, kernel@pengutronix.de, shawn.guo@linaro.org, robh+dt@kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCHv5 04/11] fbdev: ssd1307fb: Unify init code and obtain hw specific bits from DT Message-ID: <20150324221428.GD23664@lukather> References: <1423261694-5939-1-git-send-email-niederp@physik.uni-kl.de> <1427232238-21099-1-git-send-email-niederp@physik.uni-kl.de> <1427232238-21099-5-git-send-email-niederp@physik.uni-kl.de> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="3Pql8miugIZX0722" Content-Disposition: inline In-Reply-To: <1427232238-21099-5-git-send-email-niederp@physik.uni-kl.de> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org --3Pql8miugIZX0722 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Tue, Mar 24, 2015 at 10:23:51PM +0100, Thomas Niederpr=FCm wrote: > The 130X controllers are very similar from the configuration point of vie= w. > The configuration registers for the SSD1305/6/7 are bit identical (except= the > the VHCOM register and the the default values for clock setup register). = This > patch unifies the init code of the controller and adds hardware specific > properties to DT that are needed to correctly initialize the device. >=20 > The SSD130X can be wired to the OLED panel in various ways. Even for the > same controller this wiring can differ from one display module to another > and can not be probed by software. The added DT properties reflect these > hardware decisions of the display module manufacturer. > The 'com-sequential', 'com-lrremap' and 'com-invdir' values define differ= ent > possibilities for the COM signals pin configuration and readout direction > of the video memory. The 'segment-no-remap' allows the inversion of the > memory-to-pin mapping ultimately inverting the order of the controllers > output pins. The 'prechargepX' values need to be adapted according to the > capacitance of the OLEDs pixel cells. >=20 > So far these hardware specific bits are hard coded in the init code, maki= ng > the driver usable only for one certain wiring of the controller. This pat= ch > makes the driver usable with all possible hardware setups, given a valid = hw > description in DT. If these values are not set in DT the default values, > as they are set in the ssd1307 init code right now, are used. This implies > that without the corresponding DT property "segment-no-remap" the segment > remap of the ssd130X controller gets activated. Even though this is not t= he > default behaviour according to the datasheet it maintains backward > compatibility with older DTBs. >=20 > Note that the SSD1306 does not seem to be using the configuration written= to > the registers at all. Therefore this patch does not try to maintain these > values without changes in DT. For reference an example is added to the DT > bindings documentation that reproduces the configuration that is set in t= he > current init code. >=20 > Signed-off-by: Thomas Niederpr=FCm > --- > .../devicetree/bindings/video/ssd1307fb.txt | 21 +++ > drivers/video/fbdev/ssd1307fb.c | 192 ++++++++++++---= ------ > 2 files changed, 134 insertions(+), 79 deletions(-) >=20 > diff --git a/Documentation/devicetree/bindings/video/ssd1307fb.txt b/Docu= mentation/devicetree/bindings/video/ssd1307fb.txt > index 7a12542..637690f 100644 > --- a/Documentation/devicetree/bindings/video/ssd1307fb.txt > +++ b/Documentation/devicetree/bindings/video/ssd1307fb.txt > @@ -15,6 +15,16 @@ Required properties: > =20 > Optional properties: > - reset-active-low: Is the reset gpio is active on physical low? > + - solomon,segment-no-remap: Display needs normal (non-inverted) data c= olumn > + to segment mapping > + - solomon,com-sequential: Display uses sequential COM pin configuration > + - solomon,com-lrremap: Display uses left-right COM pin remap > + - solomon,com-invdir: Display uses inverted COM pin scan direction > + - solomon,com-offset: Number of the COM pin wired to the first display= line > + - solomon,prechargep1: Length of deselect period (phase 1) in clock cy= cles. > + - solomon,prechargep2: Length of precharge period (phase 2) in clock c= ycles. > + This needs to be the higher, the higher the cap= acitance > + of the OLED's pixels is > =20 > [0]: Documentation/devicetree/bindings/pwm/pwm.txt > =20 > @@ -26,3 +36,14 @@ ssd1307: oled@3c { > reset-gpios =3D <&gpio2 7>; > reset-active-low; > }; > + > +ssd1306: oled@3c { > + compatible =3D "solomon,ssd1306fb-i2c"; > + reg =3D <0x3c>; > + pwms =3D <&pwm 4 3000>; > + reset-gpios =3D <&gpio2 7>; > + reset-active-low; > + solomon,com-lrremap; > + solomon,com-invdir; > + solomon,com-offset =3D <32>; > +}; > diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd130= 7fb.c > index 8d34c56..d16aad4 100644 > --- a/drivers/video/fbdev/ssd1307fb.c > +++ b/drivers/video/fbdev/ssd1307fb.c > @@ -40,20 +40,34 @@ > =20 > struct ssd1307fb_par; > =20 > -struct ssd1307fb_ops { > - int (*init)(struct ssd1307fb_par *); > - int (*remove)(struct ssd1307fb_par *); > +struct ssd1307fb_deviceinfo { > + u32 default_vcomh; > + u32 default_dclk_div; > + u32 default_dclk_frq; > + int need_pwm; > + int need_chargepump; > }; > =20 > struct ssd1307fb_par { > + u32 com_invdir; > + u32 com_lrremap; > + u32 com_offset; > + u32 com_seq; > + u32 contrast; > + u32 dclk_div; > + u32 dclk_frq; > + struct ssd1307fb_deviceinfo *device_info; > struct i2c_client *client; > u32 height; > struct fb_info *info; > - struct ssd1307fb_ops *ops; > u32 page_offset; > + u32 prechargep1; > + u32 prechargep2; > struct pwm_device *pwm; > u32 pwm_period; > int reset; > + u32 seg_remap; > + u32 vcomh; > u32 width; > }; > =20 > @@ -254,69 +268,46 @@ static struct fb_deferred_io ssd1307fb_defio =3D { > .deferred_io =3D ssd1307fb_deferred_io, > }; > =20 > -static int ssd1307fb_ssd1307_init(struct ssd1307fb_par *par) > +static int ssd1307fb_init(struct ssd1307fb_par *par) > { > int ret; > + u32 precharge, dclk, com_invdir, compins; > =20 > - par->pwm =3D pwm_get(&par->client->dev, NULL); > - if (IS_ERR(par->pwm)) { > - dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); > - return PTR_ERR(par->pwm); > - } > - > - par->pwm_period =3D pwm_get_period(par->pwm); > - /* Enable the PWM */ > - pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); > - pwm_enable(par->pwm); > - > - dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", > - par->pwm->pwm, par->pwm_period); > - > - /* Map column 127 of the OLED to segment 0 */ > - ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); > - if (ret < 0) > - return ret; > - > - /* Turn on the display */ > - ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_DISPLAY_ON); > - if (ret < 0) > - return ret; > - > - return 0; > -} > - > -static int ssd1307fb_ssd1307_remove(struct ssd1307fb_par *par) > -{ > - pwm_disable(par->pwm); > - pwm_put(par->pwm); > - return 0; > -} > + if (par->device_info->need_pwm) { > + par->pwm =3D pwm_get(&par->client->dev, NULL); > + if (IS_ERR(par->pwm)) { > + dev_err(&par->client->dev, "Could not get PWM from device tree!\n"); > + return PTR_ERR(par->pwm); > + } > =20 > -static struct ssd1307fb_ops ssd1307fb_ssd1307_ops =3D { > - .init =3D ssd1307fb_ssd1307_init, > - .remove =3D ssd1307fb_ssd1307_remove, > -}; > + par->pwm_period =3D pwm_get_period(par->pwm); > + /* Enable the PWM */ > + pwm_config(par->pwm, par->pwm_period / 2, par->pwm_period); > + pwm_enable(par->pwm); > =20 > -static int ssd1307fb_ssd1306_init(struct ssd1307fb_par *par) > -{ > - int ret; > + dev_dbg(&par->client->dev, "Using PWM%d with a %dns period.\n", > + par->pwm->pwm, par->pwm_period); > + }; > =20 > /* Set initial contrast */ > ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_CONTRAST); > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x7f); > - if (ret < 0) > - return ret; > - > - /* Set COM direction */ > - ret =3D ssd1307fb_write_cmd(par->client, 0xc8); > + ret =3D ssd1307fb_write_cmd(par->client, par->contrast); > if (ret < 0) > return ret; > =20 > /* Set segment re-map */ > - ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); > + if (par->seg_remap) { > + ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SEG_REMAP_ON); > + if (ret < 0) > + return ret; > + }; > + > + /* Set COM direction */ > + com_invdir =3D 0xc0 | (par->com_invdir & 0xf) << 3; > + ret =3D ssd1307fb_write_cmd(par->client, com_invdir); > if (ret < 0) > return ret; > =20 > @@ -334,7 +325,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x20); > + ret =3D ssd1307fb_write_cmd(par->client, par->com_offset); > if (ret < 0) > return ret; > =20 > @@ -343,7 +334,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0xf0); > + dclk =3D (par->dclk_div & 0xf) | (par->dclk_frq & 0xf) << 4; > + ret =3D ssd1307fb_write_cmd(par->client, dclk); > if (ret < 0) > return ret; > =20 > @@ -352,7 +344,8 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x22); > + precharge =3D (par->prechargep1 & 0xf) | (par->prechargep2 & 0xf) << 4; > + ret =3D ssd1307fb_write_cmd(par->client, precharge); > if (ret < 0) > return ret; > =20 > @@ -361,7 +354,9 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x22); > + compins =3D 0x02 | (!par->com_seq & 0x1) << 4 > + | (par->com_lrremap & 0x1) << 5; > + ret =3D ssd1307fb_write_cmd(par->client, compins); > if (ret < 0) > return ret; > =20 > @@ -370,18 +365,20 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_= par *par) > if (ret < 0) > return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x49); > + ret =3D ssd1307fb_write_cmd(par->client, par->vcomh); > if (ret < 0) > return ret; > =20 > - /* Turn on the DC-DC Charge Pump */ > - ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); > - if (ret < 0) > - return ret; > + if (par->device_info->need_chargepump) { > + /* Turn on the DC-DC Charge Pump */ > + ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_CHARGE_PUMP); > + if (ret < 0) > + return ret; > =20 > - ret =3D ssd1307fb_write_cmd(par->client, 0x14); > - if (ret < 0) > - return ret; > + ret =3D ssd1307fb_write_cmd(par->client, 0x14); > + if (ret < 0) > + return ret; > + }; > =20 > /* Switch to horizontal addressing mode */ > ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SET_ADDRESS_MODE); > @@ -393,6 +390,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > + /* Set column range */ > ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SET_COL_RANGE); > if (ret < 0) > return ret; > @@ -405,6 +403,7 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_pa= r *par) > if (ret < 0) > return ret; > =20 > + /* Set page range */ > ret =3D ssd1307fb_write_cmd(par->client, SSD1307FB_SET_PAGE_RANGE); > if (ret < 0) > return ret; > @@ -426,18 +425,30 @@ static int ssd1307fb_ssd1306_init(struct ssd1307fb_= par *par) > return 0; > } > =20 > -static struct ssd1307fb_ops ssd1307fb_ssd1306_ops =3D { > - .init =3D ssd1307fb_ssd1306_init, > +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1306_deviceinfo =3D { > + .default_vcomh =3D 0x20, > + .default_dclk_div =3D 0, A division by 0 ? > + .default_dclk_frq =3D 8, > + .need_pwm =3D 0, You don't need to declare this field, its value will already be initialized to 0. > + .need_chargepump =3D 1, > +}; > + > +static struct ssd1307fb_deviceinfo ssd1307fb_ssd1307_deviceinfo =3D { > + .default_vcomh =3D 0x20, > + .default_dclk_div =3D 1, > + .default_dclk_frq =3D 12, > + .need_pwm =3D 1, > + .need_chargepump =3D 0, > }; Same thing here. > =20 > static const struct of_device_id ssd1307fb_of_match[] =3D { > { > .compatible =3D "solomon,ssd1306fb-i2c", > - .data =3D (void *)&ssd1307fb_ssd1306_ops, > + .data =3D (void *)&ssd1307fb_ssd1306_deviceinfo, > }, > { > .compatible =3D "solomon,ssd1307fb-i2c", > - .data =3D (void *)&ssd1307fb_ssd1307_ops, > + .data =3D (void *)&ssd1307fb_ssd1307_deviceinfo, > }, > {}, > }; > @@ -468,8 +479,8 @@ static int ssd1307fb_probe(struct i2c_client *client, > par->info =3D info; > par->client =3D client; > =20 > - par->ops =3D (struct ssd1307fb_ops *)of_match_device(ssd1307fb_of_match, > - &client->dev)->data; > + par->device_info =3D (struct ssd1307fb_deviceinfo *)of_match_device( > + ssd1307fb_of_match, &client->dev)->data; > =20 > par->reset =3D of_get_named_gpio(client->dev.of_node, > "reset-gpios", 0); > @@ -487,6 +498,27 @@ static int ssd1307fb_probe(struct i2c_client *client, > if (of_property_read_u32(node, "solomon,page-offset", &par->page_offset= )) > par->page_offset =3D 1; > =20 > + if (of_property_read_u32(node, "solomon,com-offset", &par->com_offset)) > + par->com_offset =3D 0; > + > + if (of_property_read_u32(node, "solomon,prechargep1", &par->prechargep1= )) > + par->prechargep1 =3D 2; > + > + if (of_property_read_u32(node, "solomon,prechargep2", &par->prechargep2= )) > + par->prechargep2 =3D 0; > + > + par->seg_remap =3D !of_property_read_bool(node, "solomon,segment-no-rem= ap"); > + par->com_seq =3D of_property_read_bool(node, "solomon,com-sequential"); > + par->com_lrremap =3D of_property_read_bool(node, "solomon,com-lrremap"); > + par->com_invdir =3D of_property_read_bool(node, "solomon,com-invdir"); > + > + par->contrast =3D 127; > + par->vcomh =3D par->device_info->default_vcomh; > + > + /* Setup display timing */ > + par->dclk_div =3D par->device_info->default_dclk_div; > + par->dclk_frq =3D par->device_info->default_dclk_frq; > + > vmem_size =3D par->width * par->height / 8; > =20 > vmem =3D (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, > @@ -539,11 +571,9 @@ static int ssd1307fb_probe(struct i2c_client *client, > gpio_set_value(par->reset, 1); > udelay(4); > =20 > - if (par->ops->init) { > - ret =3D par->ops->init(par); > - if (ret) > - goto reset_oled_error; > - } > + ret =3D ssd1307fb_init(par); > + if (ret) > + goto reset_oled_error; > =20 > ret =3D register_framebuffer(info); > if (ret) { > @@ -556,8 +586,10 @@ static int ssd1307fb_probe(struct i2c_client *client, > return 0; > =20 > panel_init_error: > - if (par->ops->remove) > - par->ops->remove(par); > + if (par->device_info->need_pwm) { > + pwm_disable(par->pwm); > + pwm_put(par->pwm); > + }; > reset_oled_error: > fb_deferred_io_cleanup(info); > fb_alloc_error: > @@ -571,8 +603,10 @@ static int ssd1307fb_remove(struct i2c_client *clien= t) > struct ssd1307fb_par *par =3D info->par; > =20 > unregister_framebuffer(info); > - if (par->ops->remove) > - par->ops->remove(par); > + if (par->device_info->need_pwm) { > + pwm_disable(par->pwm); > + pwm_put(par->pwm); > + }; > fb_deferred_io_cleanup(info); > __free_pages(__va(info->fix.smem_start), get_order(info->fix.smem_len)); > framebuffer_release(info); > --=20 > 2.3.0 >=20 --=20 Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com --3Pql8miugIZX0722 Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAEBAgAGBQJVEeHEAAoJEBx+YmzsjxAgqvkQALsLyha2eMzn6i30k1vTQ39H FCHhPIWEMe0xCNfMCeNYeVWfGZuvyZ/cQPvjnPdqnAm/kki0Coi4YUnBH5zzFKF7 Ajes6CrdIVw4Yt/plqMBj8s88/STI/dNxOBfW/mQGce451Pz1qK0877vZxtXxf6T rFgA7VGn2zkuaU9iXKWhv82f5lxUAfvE9Bf8++7eEd0/VRtr0B4nyLRLRfXTW6LU nrgOHoywVaS4zb0ENPuAOO2b/szIo5mlVIRwVSPkoJaVeyE0/qozCac2ycmfYAB8 PtCHpG4YDzLu6ocFz15FUCbHqtRsAds4Zi7zHqG1uJ5dPMLbQY77+7Ks4mRPZl6W OlZF08ntD3aawVB6rI+tc3eObdI4zohbpmN5OouiYJROQo63cUw4EcPY5Auu+qCY FTtKNMXLetmGNzpONXoHynF635imJYRUWvT+VZiJCffMYFITVqblATJZF/bPT0hW akm2LTUI1Ku0deA1rYN6lKOcrtehGX3O0mKZGuBQUTxClv0psaFhlNOYemrTLo8t ARkChoWFx7qJlMnR9m53g1VtPOYgo05x71XYcH4rGY5CMSAKItHTn5gGYf0Ckkvf mb6zlfNt8ZQQYzdHDznlafMMfzp5f1f25+QeJEgdFhNwEfhmagsWANu6b4HCLmyp WyX+t98eOZ5H++fnjR0p =gEFU -----END PGP SIGNATURE----- --3Pql8miugIZX0722--