linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: Andrew Morton <akpm@osdl.org>,
	pali.rohar@gmail.com, sre@debian.org, sre@ring0.de,
	kernel list <linux-kernel@vger.kernel.org>,
	linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
	linux-omap@vger.kernel.org, tony@atomide.com, khilman@kernel.org,
	aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com,
	patrikbachan@gmail.com, galak@codeaurora.org,
	bcousson@baylibre.com, sakari.ailus@iki.fi, m.chehab@samsung.com,
	devicetree@vger.kernel.org
Subject: [PATCHv5] media: i2c/adp1653: devicetree support for adp1653
Date: Fri, 3 Apr 2015 10:33:53 +0200	[thread overview]
Message-ID: <20150403083353.GA21070@amd> (raw)
In-Reply-To: <20150402203417.GA6336@amd>


We are moving to device tree support on OMAP3, but that currently
breaks ADP1653 driver. This adds device tree support, plus required
documentation.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
 
---

Switched to gpiod_, as requested by Javier.

Please apply,
  							Pavel

diff --git a/Documentation/devicetree/bindings/media/i2c/adp1653.txt b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
new file mode 100644
index 0000000..da9934a
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/adp1653.txt
@@ -0,0 +1,37 @@
+* Analog Devices ADP1653 flash LED driver
+
+Required Properties:
+
+  - compatible: Must contain be "adi,adp1653"
+
+  - reg: I2C slave address
+
+  - power-gpios: Reference to the GPIO that controls the power for the chip.
+
+There are two LED outputs available - flash and indicator. One LED is
+represented by one child node, nodes need to be named "flash" and "indicator".
+
+Required properties of the LED child node:
+- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+
+Required properties of the flash LED child node:
+
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		power-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			max-microamp = <50000>;
+		};
+		indicator {
+			max-microamp = <17500>;
+		};
+	};
diff --git a/drivers/media/i2c/adp1653.c b/drivers/media/i2c/adp1653.c
index 873fe19..ba7f43d 100644
--- a/drivers/media/i2c/adp1653.c
+++ b/drivers/media/i2c/adp1653.c
@@ -8,6 +8,7 @@
  * Contributors:
  *	Sakari Ailus <sakari.ailus@iki.fi>
  *	Tuukka Toivonen <tuukkat76@gmail.com>
+ *	Pavel Machek <pavel@ucw.cz>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -34,6 +35,8 @@
 #include <linux/module.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
+#include <linux/of_gpio.h>
+#include <linux/gpio.h>
 #include <media/adp1653.h>
 #include <media/v4l2-device.h>
 
@@ -306,9 +309,17 @@ adp1653_init_device(struct adp1653_flash *flash)
 static int
 __adp1653_set_power(struct adp1653_flash *flash, int on)
 {
-	int ret;
+	int ret = 0;
+
+	if (flash->platform_data->power) {
+		ret = flash->platform_data->power(&flash->subdev, on);
+	} else {
+		gpiod_set_value(flash->platform_data->power_gpio, on);
+		if (on)
+			/* Some delay is apparently required. */
+			udelay(20);
+	}
 
-	ret = flash->platform_data->power(&flash->subdev, on);
 	if (ret < 0)
 		return ret;
 
@@ -316,8 +327,13 @@ __adp1653_set_power(struct adp1653_flash *flash, int on)
 		return 0;
 
 	ret = adp1653_init_device(flash);
-	if (ret < 0)
+	if (ret >= 0)
+		return ret;
+
+	if (flash->platform_data->power)
 		flash->platform_data->power(&flash->subdev, 0);
+	else
+		gpiod_set_value(flash->platform_data->power_gpio, 0);
 
 	return ret;
 }
@@ -407,21 +423,75 @@ static int adp1653_resume(struct device *dev)
 
 #endif /* CONFIG_PM */
 
+static int adp1653_of_init(struct i2c_client *client,
+			   struct adp1653_flash *flash,
+			   struct device_node *node)
+{
+	u32 val;
+	struct adp1653_platform_data *pd;
+	struct device_node *child;
+
+	if (!node)
+		return -EINVAL;
+
+	pd = devm_kzalloc(&client->dev, sizeof(*pd), GFP_KERNEL);
+	if (!pd)
+		return -ENOMEM;
+	flash->platform_data = pd;
+
+	child = of_get_child_by_name(node, "flash");
+	if (!child)
+		return -EINVAL;
+	if (of_property_read_u32(child, "flash-timeout-microsec", &val))
+		return -EINVAL;
+
+	pd->max_flash_timeout = val;
+	if (of_property_read_u32(child, "flash-max-microamp", &val))
+		return -EINVAL;
+	pd->max_flash_intensity = val/1000;
+
+	if (of_property_read_u32(child, "max-microamp", &val))
+		return -EINVAL;
+	pd->max_torch_intensity = val/1000;
+
+	child = of_get_child_by_name(node, "indicator");
+	if (!child)
+		return -EINVAL;
+	if (of_property_read_u32(child, "max-microamp", &val))
+		return -EINVAL;
+	pd->max_indicator_intensity = val;
+
+	if (!of_find_property(node, "gpios", NULL)) {
+		dev_err(&client->dev, "No gpio node\n");
+		return -EINVAL;
+	}
+
+	pd->power_gpio = devm_gpiod_get(&client->dev, "power");
+	if (!pd->power_gpio) {
+		dev_err(&client->dev, "Error getting GPIO\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+
 static int adp1653_probe(struct i2c_client *client,
 			 const struct i2c_device_id *devid)
 {
 	struct adp1653_flash *flash;
 	int ret;
 
-	/* we couldn't work without platform data */
-	if (client->dev.platform_data == NULL)
-		return -ENODEV;
-
 	flash = devm_kzalloc(&client->dev, sizeof(*flash), GFP_KERNEL);
 	if (flash == NULL)
 		return -ENOMEM;
 
 	flash->platform_data = client->dev.platform_data;
+	if (client->dev.of_node) {
+		ret = adp1653_of_init(client, flash, client->dev.of_node);
+		if (ret)
+			return ret;
+	}
 
 	mutex_init(&flash->power_lock);
 
@@ -442,6 +512,7 @@ static int adp1653_probe(struct i2c_client *client,
 	return 0;
 
 free_and_quit:
+	dev_err(&client->dev, "adp1653: failed to register device\n");
 	v4l2_ctrl_handler_free(&flash->ctrls);
 	return ret;
 }
@@ -464,7 +535,7 @@ static const struct i2c_device_id adp1653_id_table[] = {
 };
 MODULE_DEVICE_TABLE(i2c, adp1653_id_table);
 
-static struct dev_pm_ops adp1653_pm_ops = {
+static const struct dev_pm_ops adp1653_pm_ops = {
 	.suspend	= adp1653_suspend,
 	.resume		= adp1653_resume,
 };
diff --git a/include/media/adp1653.h b/include/media/adp1653.h
index 1d9b48a..34b505e 100644
--- a/include/media/adp1653.h
+++ b/include/media/adp1653.h
@@ -100,9 +100,11 @@ struct adp1653_platform_data {
 	int (*power)(struct v4l2_subdev *sd, int on);
 
 	u32 max_flash_timeout;		/* flash light timeout in us */
-	u32 max_flash_intensity;	/* led intensity, flash mode */
-	u32 max_torch_intensity;	/* led intensity, torch mode */
-	u32 max_indicator_intensity;	/* indicator led intensity */
+	u32 max_flash_intensity;	/* led intensity, flash mode, mA */
+	u32 max_torch_intensity;	/* led intensity, torch mode, mA */
+	u32 max_indicator_intensity;	/* indicator led intensity, uA */
+
+	struct gpio_desc *power_gpio;	/* for device-tree based boot */
 };
 
 #define to_adp1653_flash(sd)	container_of(sd, struct adp1653_flash, subdev)

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  parent reply	other threads:[~2015-04-03  8:34 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-02 14:38 [PATCHv3] media: i2c/adp1653: devicetree support for adp1653 Pavel Machek
2015-04-02 16:14 ` Sakari Ailus
2015-04-02 20:30   ` Pavel Machek
2015-04-02 23:48     ` Sakari Ailus
2015-04-03  8:23       ` Pavel Machek
2015-04-03 11:23         ` Sakari Ailus
2015-04-03 20:29           ` Pavel Machek
2015-04-03 21:35             ` Sakari Ailus
2015-04-02 20:34 ` [PATCHv4] " Pavel Machek
2015-04-02 22:18   ` Javier Martinez Canillas
2015-04-03  8:21     ` Pavel Machek
2015-04-03  8:49       ` Javier Martinez Canillas
2015-04-03 14:22         ` Sebastian Reichel
2015-04-03  8:33   ` Pavel Machek [this message]
2015-04-03 11:32     ` [PATCHv5] " Sakari Ailus
2015-04-03 20:26       ` [PATCHv6] media: i2c/adp1653: Documentation for " Pavel Machek
2015-04-03 21:36         ` Sakari Ailus
2015-04-04  7:43           ` Pavel Machek
2015-04-04 10:24             ` Sakari Ailus
2015-04-04 17:11               ` Pavel Machek
2015-04-04 20:03                 ` Sakari Ailus
2015-04-09  7:42                   ` [PATCHv7] media: i2c/adp1653: Devicetree " Pavel Machek
2015-04-09  9:10                     ` Sebastian Reichel
2015-04-09 11:29                       ` Pavel Machek
2015-04-09 12:19                         ` Sebastian Reichel
2015-04-09 12:31                           ` [PATCHv7] media: i2c/adp1653: fix includes Pavel Machek
2015-04-09 12:43                             ` Javier Martinez Canillas
2015-04-09 12:59                               ` Pali Rohár
2015-04-13  8:32                                 ` Javier Martinez Canillas
2015-04-09 21:47                     ` [PATCHv7] media: i2c/adp1653: Devicetree support for adp1653 Sakari Ailus
2015-04-13 13:00                       ` Pavel Machek
2015-04-03 21:39         ` [PATCHv6] media: i2c/adp1653: Documentation for devicetree " Sakari Ailus
2015-04-03 21:04       ` [PATCHv5] media: i2c/adp1653: " Pavel Machek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150403083353.GA21070@amd \
    --to=pavel@ucw.cz \
    --cc=aaro.koskinen@iki.fi \
    --cc=akpm@osdl.org \
    --cc=bcousson@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ivo.g.dimitrov.75@gmail.com \
    --cc=khilman@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=m.chehab@samsung.com \
    --cc=pali.rohar@gmail.com \
    --cc=patrikbachan@gmail.com \
    --cc=sakari.ailus@iki.fi \
    --cc=sre@debian.org \
    --cc=sre@ring0.de \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).