From: Tomasz Duszynski <tduszyns@gmail.com>
To: Daniel Baluta <daniel.baluta@gmail.com>
Cc: Tomasz Duszynski <tduszyns@gmail.com>,
Jonathan Cameron <jic23@kernel.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald <pmeerw@pmeerw.net>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>
Subject: Re: [PATCH] iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors
Date: Thu, 23 Apr 2015 21:42:17 +0200 [thread overview]
Message-ID: <20150423194217.GA24769@Arch.lan> (raw)
In-Reply-To: <CAEnQRZBNMZTT7oB8xV+NU1gJg9FJXi_gqJivt3X1hkDhrtkcAA@mail.gmail.com>
On Thu, Apr 23, 2015 at 10:30:09AM +0300, Daniel Baluta wrote:
> On Tue, Apr 21, 2015 at 9:43 PM, Tomasz Duszynski <tduszyns@gmail.com> wrote:
> > Add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light
> > sensors.
> >
> > Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
> > ---
> > drivers/iio/light/Kconfig | 10 ++
> > drivers/iio/light/Makefile | 1 +
> > drivers/iio/light/bh1750.c | 322 +++++++++++++++++++++++++++++++++++++++++++++
> > 3 files changed, 333 insertions(+)
> > create mode 100644 drivers/iio/light/bh1750.c
> >
> > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> > index 5a3237b..9fb79ca 100644
> > --- a/drivers/iio/light/Kconfig
> > +++ b/drivers/iio/light/Kconfig
> > @@ -37,6 +37,16 @@ config APDS9300
> > To compile this driver as a module, choose M here: the
> > module will be called apds9300.
> >
> > +config BH1750
> > + tristate "BH1750 ambient light sensor"
>
> Better use ROHM BH1750 .. here.
>
>
Did git blame on Kconfig and among newest sensors some
have this manufacturer prefix while others don't, but still no problem
for me to add that.
> > +static const struct iio_chan_spec bh1750_channels[] = {
> > + {
> > + .type = IIO_INTENSITY,
>
> Shouldn't this be IIO_LIGHT channel type?
>
> Users will get illuminance after multiplying raw value with scale.
>
That naming is misleading. Thanks for pointing this out.
> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
> > + BIT(IIO_CHAN_INFO_SCALE) |
> > + BIT(IIO_CHAN_INFO_INT_TIME)
> > + }
> > +};
> > +
> > +static int bh1750_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + int ret, usec;
> > + struct bh1750_data *data;
> > + struct iio_dev *indio_dev;
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
> > + I2C_FUNC_SMBUS_WRITE_BYTE))
> > + return -ENODEV;
> > +
> > + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> > + if (!indio_dev)
> > + return -ENOMEM;
> > +
> > + data = iio_priv(indio_dev);
> > + i2c_set_clientdata(client, indio_dev);
> > + data->client = client;
> > + data->chip_info = &chip_info_tbl[id->driver_data];
> > +
> > + usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default;
> > + ret = bh1750_change_int_time(data, usec);
> > + if (ret < 0)
> > + return ret;
> > +
> > + mutex_init(&data->lock);
> > + indio_dev->dev.parent = &client->dev;
> > + indio_dev->info = &bh1750_info;
> > + indio_dev->name = id->name;
> > + indio_dev->channels = bh1750_channels;
> > + indio_dev->num_channels = ARRAY_SIZE(bh1750_channels);
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > +
> > + return devm_iio_device_register(&client->dev, indio_dev);
>
> You need also to add a remove function where the chip is powered down. Then
> you shouldn't use devm_iio_device_register here, because you need to control
> the order of chip powerdown/ device unregister operations at remove.
>
Right.
> thanks,
> Daniel.
Thanks for review!
prev parent reply other threads:[~2015-04-23 19:47 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-21 18:43 [PATCH] iio: light: add support for ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors Tomasz Duszynski
2015-04-22 8:49 ` Peter Meerwald
2015-04-22 17:36 ` tduszyns
2015-04-23 7:30 ` Daniel Baluta
2015-04-23 19:42 ` Tomasz Duszynski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150423194217.GA24769@Arch.lan \
--to=tduszyns@gmail.com \
--cc=daniel.baluta@gmail.com \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).