From: Lee Jones <lee.jones@linaro.org>
To: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
rtc-linux@googlegroups.com, sameo@linux.intel.com,
a.zummo@towertech.it, alexandre.belloni@free-electrons.com,
Chao Xie <chao.xie@marvell.com>
Subject: Re: [PATCH 1/4] mfd: 88pm800: add device tree support
Date: Mon, 1 Jun 2015 09:38:35 +0100 [thread overview]
Message-ID: <20150601083835.GE3329@x1> (raw)
In-Reply-To: <1432937962-4537-2-git-send-email-vaibhav.hiremath@linaro.org>
On Sat, 30 May 2015, Vaibhav Hiremath wrote:
> Add DT support to the 88pm800 driver along with below properties
> - marvell,88pm800-irq-write-clear :
> Idicates whether interrupt status is cleared by write
>
> Also, creates the DT binding text file,
> Documentation/devicetree/bindings/mfd/88pm800.txt
>
> Signed-off-by: Chao Xie <chao.xie@marvell.com>
> Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
> ---
> Documentation/devicetree/bindings/mfd/88pm800.txt | 57 +++++++++++++++++++++++
> drivers/mfd/88pm800.c | 39 ++++++++++++++++
These should be submitted separately.
> 2 files changed, 96 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/88pm800.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/88pm800.txt b/Documentation/devicetree/bindings/mfd/88pm800.txt
> new file mode 100644
> index 0000000..094951b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/88pm800.txt
> @@ -0,0 +1,57 @@
> +* Marvell 88PM800 Power Management IC
> +
> +Required parent device properties:
> +- compatible : "marvell,88pm800"
> +- reg : the I2C slave address for the 88pm800 chip
> +- interrupts : IRQ line for the 88pm800 chip
> +- interrupt-controller: describes the 88pm800 as an interrupt controller
> +- #interrupt-cells : should be 1.
> + - The cell is the 88pm800 local IRQ number
> +
> +Optional parent device properties:
> +- marvell,88pm800-irq-write-clr: indicates whether interrupt status is cleared by write
Drop the device name. These bindings should be as generic as possible.
Also describe what the absence of the property means.
> +88pm800 consists of a large and varied group of sub-devices:
3?
> +Device Supply Names Description
> +------ ------------ -----------
> +88pm80x-onkey : : On key
> +88pm80x-rtc : : RTC
> +88pm80x : : Regulators
Surely regulators is 88pm80x-regulator, no?
> +Note: More device list will follow
> +
> +Example:
> +
> + pmic: 88pm800@30 {
> + compatible = "marvell,88pm800";
> + reg = <0x30>;
> + interrupts = <0 77 0x4>;
Please use the #defines in include/dt-bindings/
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + marvell,88pm800-irq-write-clr;
> +
> + regulators {
> + compatible = "marvell,88pm80x-regulator";
> +
> + buck1a: BUCK1A {
> + regulator-compatible = "88PM800-BUCK1A";
> + regulator-min-microvolt = <600000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + ldo1: LDO1 {
> + regulator-compatible = "88PM800-LDO1";
> + regulator-min-microvolt = <1700000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
'\n' here.
> + rtc {
> + compatible = "marvell,88pm80x-rtc";
> + };
> + };
> diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c
> index 841717a..06ee058 100644
> --- a/drivers/mfd/88pm800.c
> +++ b/drivers/mfd/88pm800.c
> @@ -27,6 +27,7 @@
> #include <linux/mfd/core.h>
> #include <linux/mfd/88pm80x.h>
> #include <linux/slab.h>
> +#include <linux/of_device.h>
>
> /* Interrupt Registers */
> #define PM800_INT_STATUS1 (0x05)
> @@ -121,6 +122,11 @@ static const struct i2c_device_id pm80x_id_table[] = {
> };
> MODULE_DEVICE_TABLE(i2c, pm80x_id_table);
>
> +static const struct of_device_id pm80x_of_match_table[] = {
> + { .compatible = "marvell,88pm800", },
> + {},
> +};
> +
> static struct resource rtc_resources[] = {
> {
> .name = "88pm80x-rtc",
> @@ -133,6 +139,7 @@ static struct resource rtc_resources[] = {
> static struct mfd_cell rtc_devs[] = {
> {
> .name = "88pm80x-rtc",
> + .of_compatible = "marvell,88pm80x-rtc",
> .num_resources = ARRAY_SIZE(rtc_resources),
> .resources = &rtc_resources[0],
> .id = -1,
> @@ -151,6 +158,7 @@ static struct resource onkey_resources[] = {
> static const struct mfd_cell onkey_devs[] = {
> {
> .name = "88pm80x-onkey",
> + .of_compatible = "marvell,88pm80x-onkey",
> .num_resources = 1,
> .resources = &onkey_resources[0],
> .id = -1,
> @@ -160,6 +168,7 @@ static const struct mfd_cell onkey_devs[] = {
> static const struct mfd_cell regulator_devs[] = {
> {
> .name = "88pm80x-regulator",
> + .of_compatible = "marvell,88pm80x-regulator",
> .id = -1,
> },
> };
> @@ -538,14 +547,43 @@ out:
> return ret;
> }
>
> +static int pm800_probe_dt(struct device_node *np,
> + struct device *dev,
Do you even use dev?
> + struct pm80x_platform_data *pdata)
> +{
> + pdata->irq_mode =
> + of_property_read_bool(np, "marvell,88pm800-irq-write-clear");
You write a new function for this?
> + return 0;
> +}
> +
> +
Superfluous '\n'.
> static int pm800_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> int ret = 0;
> struct pm80x_chip *chip;
> struct pm80x_platform_data *pdata = dev_get_platdata(&client->dev);
> + struct device_node *node = client->dev.of_node;
It's more common to use 'np'.
> struct pm80x_subchip *subchip;
>
> + if (!pdata && !node) {
> + dev_err(&client->dev,
> + "pm80x requires platform data or of_node\n");
> + return -EINVAL;
> + }
> +
> + if (!pdata) {
> + pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata) {
> + dev_err(&client->dev, "failed to allocaate memory\n");
> + return -ENOMEM;
> + }
> + ret = pm800_probe_dt(node, &client->dev, pdata);
> + if (ret)
> + return ret;
> + }
All this for a single attribute? Please simplify.
> ret = pm80x_init(client);
> if (ret) {
> dev_err(&client->dev, "pm800_init fail\n");
> @@ -611,6 +649,7 @@ static struct i2c_driver pm800_driver = {
> .name = "88PM800",
> .owner = THIS_MODULE,
> .pm = &pm80x_pm_ops,
> + .of_match_table = pm80x_of_match_table,
> },
> .probe = pm800_probe,
> .remove = pm800_remove,
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
next prev parent reply other threads:[~2015-06-01 8:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-29 22:19 [PATCH 0/4] Add Device tree support for 88PM800 mfd and rtc driver Vaibhav Hiremath
2015-05-29 22:19 ` [PATCH 1/4] mfd: 88pm800: add device tree support Vaibhav Hiremath
2015-06-01 8:38 ` Lee Jones [this message]
2015-06-16 7:52 ` Vaibhav Hiremath
2015-06-16 13:02 ` Rob Herring
2015-06-16 14:36 ` Vaibhav Hiremath
2015-05-29 22:19 ` [PATCH 2/4] mfd: 88pm800: use irq_mode to configure interrupt status reg clear method Vaibhav Hiremath
2015-06-01 8:31 ` Lee Jones
2015-06-02 8:51 ` Vaibhav Hiremath
2015-05-29 22:19 ` [PATCH 3/4] rtc: 88pm80x: add device tree support Vaibhav Hiremath
2015-05-29 22:19 ` [PATCH 4/4] mfd: 88pm800: allocate pdata->rtc if not allocated earlier Vaibhav Hiremath
2015-06-01 8:22 ` Lee Jones
2015-06-02 5:07 ` Vaibhav Hiremath
2015-06-02 7:40 ` Lee Jones
2015-06-02 9:05 ` Vaibhav Hiremath
2015-06-02 9:33 ` Lee Jones
2015-06-02 9:49 ` Vaibhav Hiremath
2015-06-02 10:07 ` Lee Jones
2015-06-02 10:18 ` Vaibhav Hiremath
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150601083835.GE3329@x1 \
--to=lee.jones@linaro.org \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@free-electrons.com \
--cc=chao.xie@marvell.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rtc-linux@googlegroups.com \
--cc=sameo@linux.intel.com \
--cc=vaibhav.hiremath@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).