From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753366AbbFLLJV (ORCPT ); Fri, 12 Jun 2015 07:09:21 -0400 Received: from cantor2.suse.de ([195.135.220.15]:55073 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751156AbbFLLJU (ORCPT ); Fri, 12 Jun 2015 07:09:20 -0400 Date: Fri, 12 Jun 2015 13:09:15 +0200 From: Johannes Thumshirn To: Sreekanth Reddy Cc: jejb@kernel.org, hch@infradead.org, martin.petersen@oracle.com, linux-scsi@vger.kernel.org, JBottomley@Parallels.com, Sathya.Prakash@avagotech.com, linux-kernel@vger.kernel.org Subject: Re: [PATCH 01/20] [SCSI] mpt3sas: Added Combined Reply Queue feature to extend up-to 96 MSIX vector support Message-ID: <20150612110915.GB2812@c203.arch.suse.de> References: <1434102153-38581-1-git-send-email-Sreekanth.Reddy@avagotech.com> <1434102153-38581-2-git-send-email-Sreekanth.Reddy@avagotech.com> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: <1434102153-38581-2-git-send-email-Sreekanth.Reddy@avagotech.com> User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Jun 12, 2015 at 03:12:13PM +0530, Sreekanth Reddy wrote: > In this patch, increased the number of MSIX vector support for SAS3 C0 HBAs to up-to 96. > > Following are changes that are done in this patch > 1. Support this feature only for SAS3 C0 cards and also only when reply post free queue count is greater than 8. > 2. Instead of using single ReplyPostHostIndex system interface, here 12 ReplyPostHostIndex system interfaces are used. reply post free queues numbered from 0 to 7 use the first ReplyPostHostIndex system interface to update its corresponding ReplyPostHostIndex values, reply post free queues numbered from 8 to 15 will use the second ReplyPostHostIndex system interface and so on. These 12 ReplyPostHostIndex system interfaces address are saved in the array replyPostRegisterIndex[]. > 3. Update the ReplyPostHostIndex value of corresponding reply post free queue in the (its msix_index/8)th entry of replyPostRegisterIndex[] array after processing the reply post descriptor. > > Signed-off-by: Sreekanth Reddy > --- > drivers/scsi/mpt3sas/mpt3sas_base.c | 70 +++++++++++++++++++++++++++++++++---- > drivers/scsi/mpt3sas/mpt3sas_base.h | 7 +++- > 2 files changed, 69 insertions(+), 8 deletions(-) > > diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c > index 14a781b..c13a365 100644 > --- a/drivers/scsi/mpt3sas/mpt3sas_base.c > +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c > @@ -83,7 +83,7 @@ static int msix_disable = -1; > module_param(msix_disable, int, 0); > MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); > > -static int max_msix_vectors = 8; > +static int max_msix_vectors = -1; > module_param(max_msix_vectors, int, 0); > MODULE_PARM_DESC(max_msix_vectors, > " max msix vectors - (default=8)"); When changing the default value, please also update the description reflecting this change. > @@ -1009,8 +1009,15 @@ _base_interrupt(int irq, void *bus_id) > } > > wmb(); > - writel(reply_q->reply_post_host_index | (msix_index << > - MPI2_RPHI_MSIX_INDEX_SHIFT), &ioc->chip->ReplyPostHostIndex); > + if (ioc->msix96_vector) { > + writel(reply_q->reply_post_host_index | ((msix_index & 7) << > + MPI2_RPHI_MSIX_INDEX_SHIFT), > + ioc->replyPostRegisterIndex[msix_index/8]); > + } else { > + writel(reply_q->reply_post_host_index | (msix_index << > + MPI2_RPHI_MSIX_INDEX_SHIFT), > + &ioc->chip->ReplyPostHostIndex); > + } > atomic_dec(&reply_q->busy); > return IRQ_HANDLED; > } > @@ -1560,8 +1567,6 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) > > pci_read_config_word(ioc->pdev, base + 2, &message_control); > ioc->msix_vector_count = (message_control & 0x3FF) + 1; > - if (ioc->msix_vector_count > 8) > - ioc->msix_vector_count = 8; > dinitprintk(ioc, pr_info(MPT3SAS_FMT > "msix is supported, vector_count(%d)\n", > ioc->name, ioc->msix_vector_count)); > @@ -1880,6 +1885,31 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) > if (r) > goto out_fail; > > + /* Use the Combined reply queue feature only for SAS3 C0 HBAs and > + * also only when reply queue count is greater than 8 > + */ > + if (ioc->msix96_vector && ioc->reply_queue_count > 8) { > + /* If this is an 96 vector supported device, > + set up ReplyPostIndex addresses */ > + ioc->replyPostRegisterIndex = kcalloc(12, > + sizeof(resource_size_t *), GFP_KERNEL); > + if (!ioc->replyPostRegisterIndex) { > + dfailprintk(ioc, printk(MPT3SAS_FMT > + "allocation for reply Post Register Index failed!!!\n", > + ioc->name)); > + r = -ENOMEM; > + goto out_fail; > + } > + > + for (i = 0; i < 12; i++) { > + ioc->replyPostRegisterIndex[i] = (resource_size_t *) > + ((u8 *)&ioc->chip->Doorbell + > + MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET + > + (i * 0x10)); > + } > + } else > + ioc->msix96_vector = 0; > + > list_for_each_entry(reply_q, &ioc->reply_queue_list, list) > pr_info(MPT3SAS_FMT "%s: IRQ %d\n", > reply_q->name, ((ioc->msix_enable) ? "PCI-MSI-X enabled" : > @@ -1901,6 +1931,8 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) > pci_release_selected_regions(ioc->pdev, ioc->bars); > pci_disable_pcie_error_reporting(pdev); > pci_disable_device(pdev); > + if (ioc->msix96_vector) > + kfree(ioc->replyPostRegisterIndex); > return r; > } > > @@ -4522,8 +4554,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) > > /* initialize reply post host index */ > list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { > - writel(reply_q->msix_index << MPI2_RPHI_MSIX_INDEX_SHIFT, > - &ioc->chip->ReplyPostHostIndex); > + if (ioc->msix96_vector) { > + writel((reply_q->msix_index & 7)<< > + MPI2_RPHI_MSIX_INDEX_SHIFT, > + ioc->replyPostRegisterIndex[reply_q->msix_index/8]); > + } else { > + writel(reply_q->msix_index << > + MPI2_RPHI_MSIX_INDEX_SHIFT, > + &ioc->chip->ReplyPostHostIndex); > + } > + > if (!_base_is_controller_msix_enabled(ioc)) > goto skip_init_reply_post_host_index; > } > @@ -4577,6 +4617,9 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) > _base_free_irq(ioc); > _base_disable_msix(ioc); > > + if (ioc->msix96_vector) > + kfree(ioc->replyPostRegisterIndex); > + > if (ioc->chip_phys && ioc->chip) > iounmap(ioc->chip); > ioc->chip_phys = 0; > @@ -4600,6 +4643,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) > { > int r, i; > int cpu_id, last_cpu_id = 0; > + u8 revision; > > dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, > __func__)); > @@ -4618,6 +4662,18 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) > r = -ENOMEM; > goto out_free_resources; > } > + /* Check whether the controller revision is C0 or above. > + C0 and above revision controllers support 96 vectors */ > + revision = ioc->pdev->revision; > + > + if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 || > + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 || > + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 || > + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 || > + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 || > + ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) && > + (revision >= 0x02)) > + ioc->msix96_vector = 1; > > ioc->rdpq_array_enable_assigned = 0; > ioc->dma_mask = 0; > diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h > index afa8816..6b8d8f1 100644 > --- a/drivers/scsi/mpt3sas/mpt3sas_base.h > +++ b/drivers/scsi/mpt3sas/mpt3sas_base.h > @@ -728,7 +728,8 @@ typedef void (*MPT3SAS_FLUSH_RUNNING_CMDS)(struct MPT3SAS_ADAPTER *ioc); > * is assigned only ones > * @reply_queue_count: number of reply queue's > * @reply_queue_list: link list contaning the reply queue info > - * @reply_post_host_index: head index in the pool where FW completes IO > + * @msix96_vector: 96 MSI-X vector support > + * @replyPostRegisterIndex: index of next position in Reply Desc Post Queue > * @delayed_tr_list: target reset link list > * @delayed_tr_volume_list: volume target reset link list > * @@temp_sensors_count: flag to carry the number of temperature sensors > @@ -937,6 +938,10 @@ struct MPT3SAS_ADAPTER { > u8 reply_queue_count; > struct list_head reply_queue_list; > > + u8 msix96_vector; > + /* reply post register index */ > + resource_size_t **replyPostRegisterIndex; > + I know there are many uses of mixed-case varibles in this driver and changing them when they're already in makes no sense, but maybe you could consider getting rid of them in your mpt2sas/mpt3sas merge, as it is not really a commonly seen pattern in the linux kernel. > struct list_head delayed_tr_list; > struct list_head delayed_tr_volume_list; > u8 temp_sensors_count; > -- > 2.0.2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Johannes Thumshirn Storage jthumshirn@suse.de +49 911 74053 689 SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton HRB 21284 (AG Nürnberg)