Re: [PATCH RESEND 1/4] dt-bindings: add SMP enable-method for Broadcom NSP

From: Rob Herring <robh@kernel.org>
To: Kapil Hali <kapilh@broadcom.com>
Cc: Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Russell King <linux@arm.linux.org.uk>,
	Ray Jui <rjui@broadcom.com>,
	Scott Branden <sbranden@broadcom.com>,
	Jon Mason <jonmason@broadcom.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Gregory Fong <gregory.0xf0@gmail.com>, Lee Jones <lee@kernel.org>,
	Hauke Mehrtens <hauke@hauke-m.de>,
	Heiko Stuebner <heiko@sntech.de>,
	Kever Yang <kever.yang@rock-chips.com>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Olof Johansson <olof@lixom.net>, Paul Walmsley <paul@pwsan.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Chen-Yu Tsai <wens@csie.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com
Subject: Re: [PATCH RESEND 1/4] dt-bindings: add SMP enable-method for Broadcom NSP
Date: Thu, 5 Nov 2015 14:48:25 -0600	[thread overview]
Message-ID: <20151105204825.GA19314@rob-hp-laptop> (raw)
In-Reply-To: <1446702681-45339-2-git-send-email-kapilh@broadcom.com>

On Thu, Nov 05, 2015 at 12:51:18AM -0500, Kapil Hali wrote:
> Add a compatible string "brcm,bcm-nsp-smp" for Broadcom's
> Northstar Plus CPU to the 32-bit ARM CPU device tree binding
> documentation file and create a new binding documentation for
> Northstar Plus CPU pen-release mechanism.
> 
> Signed-off-by: Kapil Hali <kapilh@broadcom.com>
> ---
>  .../bindings/arm/bcm/brcm,nsp-cpu-method.txt       | 36 ++++++++++++++++++++++
>  Documentation/devicetree/bindings/arm/cpus.txt     |  1 +
>  2 files changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> new file mode 100644
> index 0000000..8506da7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
> @@ -0,0 +1,36 @@
> +Broadcom Northstar Plus SoC CPU Enable Method
> +---------------------------------------------
> +This binding defines the enable method used for starting secondary
> +CPUs in the following Broadcom SoCs:
> +  BCM58522, BCM58525, BCM58535, BCM58622, BCM58623, BCM58625, BCM88312
> +
> +The enable method is specified by defining the following required
> +properties in the "cpus" device tree node:
> +  - enable-method = "brcm,bcm-nsp-smp";

This is supposed to be per core.

> +  - secondary-boot-reg = <...>;

What happens with more than 2 cores?

> +The secondary-boot-reg property is a u32 value that specifies the
> +physical address of the register used to request the ROM holding pen
> +code release a secondary CPU.
> +
> +Example:
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		enable-method = "brcm,bcm-nsp-smp";
> +		secondary-boot-reg = <0xffff042c>;
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			next-level-cache = <&L2>;
> +			reg = <0>;
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a9";
> +			next-level-cache = <&L2>;
> +			reg = <1>;
> +		};
> +	};
> diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
> index 91e6e5c..6abe3f3 100644
> --- a/Documentation/devicetree/bindings/arm/cpus.txt
> +++ b/Documentation/devicetree/bindings/arm/cpus.txt
> @@ -191,6 +191,7 @@ nodes to be present and contain the properties described below.
>  			    "allwinner,sun8i-a23"
>  			    "arm,psci"
>  			    "brcm,brahma-b15"
> +			    "brcm,bcm-nsp-smp"
>  			    "marvell,armada-375-smp"
>  			    "marvell,armada-380-smp"
>  			    "marvell,armada-390-smp"
> -- 
> 2.1.0
> 