Re: [RFD] CAT user space interface revisited

[Marcelo Tosatti <mtosatti@redhat.com>]

On Wed, Nov 18, 2015 at 07:25:03PM +0100, Thomas Gleixner wrote:
> Folks!
> 
> After rereading the mail flood on CAT and staring into the SDM for a
> while, I think we all should sit back and look at it from scratch
> again w/o our preconceptions - I certainly had to put my own away.
> 
> Let's look at the properties of CAT again:
> 
>    - It's a per socket facility
> 
>    - CAT slots can be associated to external hardware. This
>      association is per socket as well, so different sockets can have
>      different behaviour. I missed that detail when staring the first
>      time, thanks for the pointer!
> 
>    - The association ifself is per cpu. The COS selection happens on a
>      CPU while the set of masks which are selected via COS are shared
>      by all CPUs on a socket.
> 
> There are restrictions which CAT imposes in terms of configurability:
> 
>    - The bits which select a cache partition need to be consecutive
> 
>    - The number of possible cache association masks is limited
> 
> Let's look at the configurations (CDP omitted and size restricted)
> 
> Default:   1 1 1 1 1 1 1 1
> 	   1 1 1 1 1 1 1 1
> 	   1 1 1 1 1 1 1 1
> 	   1 1 1 1 1 1 1 1
> 
> Shared:	   1 1 1 1 1 1 1 1
> 	   0 0 1 1 1 1 1 1
> 	   0 0 0 0 1 1 1 1
> 	   0 0 0 0 0 0 1 1
> 
> Isolated:  1 1 1 1 0 0 0 0
> 	   0 0 0 0 1 1 0 0
> 	   0 0 0 0 0 0 1 0
> 	   0 0 0 0 0 0 0 1
> 
> Or any combination thereof. Surely some combinations will not make any
> sense, but we really should not make any restrictions on the stupidity
> of a sysadmin. The worst outcome might be L3 disabled for everything,
> so what?
> 
> Now that gets even more convoluted if CDP comes into play and we
> really need to look at CDP right now. We might end up with something
> which looks like this:
> 
>    	   1 1 1 1 0 0 0 0	Code
> 	   1 1 1 1 0 0 0 0	Data
> 	   0 0 0 0 0 0 1 0	Code
> 	   0 0 0 0 1 1 0 0	Data
> 	   0 0 0 0 0 0 0 1	Code
> 	   0 0 0 0 1 1 0 0	Data
> or 
> 	   0 0 0 0 0 0 0 1	Code
> 	   0 0 0 0 1 1 0 0	Data
> 	   0 0 0 0 0 0 0 1	Code
> 	   0 0 0 0 0 1 1 0	Data
> 
> Let's look at partitioning itself. We have two options:
> 
>    1) Per task partitioning
> 
>    2) Per CPU partitioning
> 
> So far we only talked about #1, but I think that #2 has a value as
> well. Let me give you a simple example.
> 
> Assume that you have isolated a CPU and run your important task on
> it. You give that task a slice of cache. Now that task needs kernel
> services which run in kernel threads on that CPU. We really don't want
> to (and cannot) hunt down random kernel threads (think cpu bound
> worker threads, softirq threads ....) and give them another slice of
> cache. What we really want is:
> 
>     	 1 1 1 1 0 0 0 0    <- Default cache
> 	 0 0 0 0 1 1 1 0    <- Cache for important task
> 	 0 0 0 0 0 0 0 1    <- Cache for CPU of important task
> 
> It would even be sufficient for particular use cases to just associate
> a piece of cache to a given CPU and do not bother with tasks at all.
> 
> We really need to make this as configurable as possible from userspace
> without imposing random restrictions to it. I played around with it on
> my new intel toy and the restriction to 16 COS ids (that's 8 with CDP
> enabled) makes it really useless if we force the ids to have the same
> meaning on all sockets and restrict it to per task partitioning.
> 
> Even if next generation systems will have more COS ids available,
> there are not going to be enough to have a system wide consistent
> view unless we have COS ids > nr_cpus.
> 
> Aside of that I don't think that a system wide consistent view is
> useful at all.
> 
>  - If a task migrates between sockets, it's going to suffer anyway.
>    Real sensitive applications will simply pin tasks on a socket to
>    avoid that in the first place. If we make the whole thing
>    configurable enough then the sysadmin can set it up to support
>    even the nonsensical case of identical cache partitions on all
>    sockets and let tasks use the corresponding partitions when
>    migrating.
> 
>  - The number of cache slices is going to be limited no matter what,
>    so one still has to come up with a sensible partitioning scheme.
> 
>  - Even if we have enough cos ids the system wide view will not make
>    the configuration problem any simpler as it remains per socket.
> 
> It's hard. Policies are hard by definition, but this one is harder
> than most other policies due to the inherent limitations.
> 
> So now to the interface part. Unfortunately we need to expose this
> very close to the hardware implementation as there are really no
> abstractions which allow us to express the various bitmap
> combinations. Any abstraction I tried to come up with renders that
> thing completely useless.
> 
> I was not able to identify any existing infrastructure where this
> really fits in. I chose a directory/file based representation. We
> certainly could do the same with a syscall, but that's just an
> implementation detail.
> 
> At top level:
> 
>    xxxxxxx/cat/max_cosids		<- Assume that all CPUs are the same
>    xxxxxxx/cat/max_maskbits		<- Assume that all CPUs are the same
>    xxxxxxx/cat/cdp_enable		<- Depends on CDP availability
> 
> Per socket data:
> 
>    xxxxxxx/cat/socket-0/
>    ...
>    xxxxxxx/cat/socket-N/l3_size
>    xxxxxxx/cat/socket-N/hwsharedbits
> 
> Per socket mask data:
> 
>    xxxxxxx/cat/socket-N/cos-id-0/
>    ...
>    xxxxxxx/cat/socket-N/cos-id-N/inuse
> 				/cat_mask	
> 				/cdp_mask	<- Data mask if CDP enabled
> 
> Per cpu default cos id for the cpus on that socket:
> 
>    xxxxxxx/cat/socket-N/cpu-x/default_cosid
>    ...
>    xxxxxxx/cat/socket-N/cpu-N/default_cosid
> 
> The above allows a simple cpu based partitioning. All tasks which do
> not have a cache partition assigned on a particular socket use the
> default one of the cpu they are running on.
> 
> Now for the task(s) partitioning:
> 
>    xxxxxxx/cat/partitions/
> 
> Under that directory one can create partitions
> 
>    xxxxxxx/cat/partitions/p1/tasks
> 			    /socket-0/cosid
> 			    ...
> 			    /socket-n/cosid
> 
>    The default value for the per socket cosid is COSID_DEFAULT, which
>    causes the task(s) to use the per cpu default id.
> 
> Thoughts?
> 
> Thanks,
> 
> 	tglx

The cgroups interface works, but moves the problem of contiguous
allocation to userspace, and is incompatible with cache allocations
on demand.

Have to solve the kernel threads VS cgroups issue...