From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
David Airlie <airlied@linux.ie>,
Thierry Reding <thierry.reding@gmail.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
devicetree <devicetree@vger.kernel.org>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>,
linux-kernel <linux-kernel@vger.kernel.org>,
linux-clk <linux-clk@vger.kernel.org>,
dri-devel <dri-devel@lists.freedesktop.org>,
linux-sunxi <linux-sunxi@googlegroups.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Hans de Goede <hdegoede@redhat.com>,
Alexander Kaplan <alex@nextthing.co>,
Boris Brezillon <boris.brezillon@free-electrons.com>,
Wynter Woods <wynter@nextthing.co>,
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Rob Clark <robdclark@gmail.com>, Daniel Vetter <daniel@ffwll.ch>
Subject: Re: [PATCH v2 05/26] clk: sunxi: Add display and TCON0 clocks driver
Date: Wed, 3 Feb 2016 21:18:34 +0100 [thread overview]
Message-ID: <20160203201834.GC3327@lukather> (raw)
In-Reply-To: <CAGb2v65=EVTQo8KFMECVR4=94i0rt0V1H07hWKyXShSZxGYKEQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 12506 bytes --]
On Sat, Jan 16, 2016 at 11:29:41PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Thu, Jan 14, 2016 at 11:24 PM, Maxime Ripard
> <maxime.ripard@free-electrons.com> wrote:
> > The A10 SoCs and its relatives has a special clock controller to drive the
> > display engines (both frontend and backend), that have a lot in common with
> > the clock to drive the first TCON channel.
> >
> > Add a driver to support both.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> > ---
> > Documentation/devicetree/bindings/clock/sunxi.txt | 2 +
> > drivers/clk/sunxi/Makefile | 1 +
> > drivers/clk/sunxi/clk-sun4i-display.c | 241 ++++++++++++++++++++++
> > 3 files changed, 244 insertions(+)
> > create mode 100644 drivers/clk/sunxi/clk-sun4i-display.c
> >
> > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> > index 8a47b77abfca..5360554a7d3f 100644
> > --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> > @@ -55,6 +55,7 @@ Required properties:
> > "allwinner,sun9i-a80-apb1-gates-clk" - for the APB1 gates on A80
> > "allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> > "allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
> > + "allwinner,sun4i-a10-display-clk" - for the display clocks on the A10
> > "allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
> > "allwinner,sun4i-a10-mmc-clk" - for the MMC clock
> > "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
> > @@ -64,6 +65,7 @@ Required properties:
> > "allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
> > "allwinner,sun7i-a20-out-clk" - for the external output clocks
> > "allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
> > + "allwinner,sun4i-a10-tcon-ch0-clk" - for the TCON channel 0 clock on the A10
> > "allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
> > "allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
> > "allwinner,sun6i-a31-usb-clk" - for usb gates + resets on A31
> > diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
> > index cb4c299214ce..a991cd8ca509 100644
> > --- a/drivers/clk/sunxi/Makefile
> > +++ b/drivers/clk/sunxi/Makefile
> > @@ -10,6 +10,7 @@ obj-y += clk-a10-pll2.o
> > obj-y += clk-a20-gmac.o
> > obj-y += clk-mod0.o
> > obj-y += clk-simple-gates.o
> > +obj-y += clk-sun4i-display.o
> > obj-y += clk-sun8i-mbus.o
> > obj-y += clk-sun9i-core.o
> > obj-y += clk-sun9i-mmc.o
> > diff --git a/drivers/clk/sunxi/clk-sun4i-display.c b/drivers/clk/sunxi/clk-sun4i-display.c
> > new file mode 100644
> > index 000000000000..9dc6894f0934
> > --- /dev/null
> > +++ b/drivers/clk/sunxi/clk-sun4i-display.c
> > @@ -0,0 +1,241 @@
> > +/*
> > + * Copyright 2015 Maxime Ripard
> > + *
> > + * Maxime Ripard <maxime.ripard@free-electrons.com>
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License as published by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/kernel.h>
> > +#include <linux/of_address.h>
> > +#include <linux/reset-controller.h>
> > +#include <linux/slab.h>
> > +#include <linux/spinlock.h>
> > +
> > +struct sun4i_a10_display_clk_data {
> > + bool has_div;
> > + bool has_rst;
> > + u8 parents;
> > +
> > + u8 offset_en;
> > + u8 offset_div;
> > + u8 offset_mux;
> > + u8 offset_rst;
> > +
> > + u8 width_div;
> > + u8 width_mux;
> > +};
> > +
> > +struct reset_data {
> > + void __iomem *reg;
> > + spinlock_t *lock;
> > + struct reset_controller_dev rcdev;
> > + u8 offset;
> > +};
> > +
> > +static DEFINE_SPINLOCK(sun4i_a10_display_lock);
> > +
> > +static inline struct reset_data *rcdev_to_reset_data(struct reset_controller_dev *rcdev)
> > +{
> > + return container_of(rcdev, struct reset_data, rcdev);
> > +};
> > +
> > +static int sun4i_a10_display_assert(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + spin_lock_irqsave(data->lock, flags);
> > +
> > + reg = readl(data->reg);
> > + writel(reg & ~BIT(data->offset), data->reg);
> > +
> > + spin_unlock_irqrestore(data->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_a10_display_deassert(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > + unsigned long flags;
> > + u32 reg;
> > +
> > + spin_lock_irqsave(data->lock, flags);
> > +
> > + reg = readl(data->reg);
> > + writel(reg | BIT(data->offset), data->reg);
> > +
> > + spin_unlock_irqrestore(data->lock, flags);
> > +
> > + return 0;
> > +}
> > +
> > +static int sun4i_a10_display_status(struct reset_controller_dev *rcdev,
> > + unsigned long id)
> > +{
> > + struct reset_data *data = rcdev_to_reset_data(rcdev);
> > +
> > + return !(readl(data->reg) & BIT(data->offset));
> > +}
> > +
> > +static const struct reset_control_ops sun4i_a10_display_reset_ops = {
> > + .assert = sun4i_a10_display_assert,
> > + .deassert = sun4i_a10_display_deassert,
> > + .status = sun4i_a10_display_status,
> > +};
> > +
> > +static int sun4i_a10_display_reset_xlate(struct reset_controller_dev *rcdev,
> > + const struct of_phandle_args *spec)
> > +{
> > + /* We only have a single reset signal */
> > + return 0;
> > +}
> > +
> > +static void __init sun4i_a10_display_init(struct device_node *node,
> > + struct sun4i_a10_display_clk_data *data)
> > +{
> > + const char *parents[data->parents];
> > + const char *clk_name = node->name;
> > + struct reset_data *reset_data;
> > + struct clk_divider *div = NULL;
> > + struct clk_gate *gate;
> > + struct clk_mux *mux;
> > + void __iomem *reg;
> > + struct clk *clk;
> > + int i;
> > +
> > + of_property_read_string(node, "clock-output-names", &clk_name);
> > +
> > + reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > + if (IS_ERR(reg)) {
> > + pr_err("%s: Could not map the clock registers\n", clk_name);
> > + return;
> > + }
> > +
> > + of_clk_parent_fill(node, parents, data->parents);
>
> What if someone uses an incorrect DT that has less parents described?
Then here be dragons ? :)
I'll fix that.
> > +
> > + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
> > + if (!mux)
> > + return;
> > +
> > + mux->reg = reg;
> > + mux->shift = data->offset_mux;
> > + mux->mask = (1 << data->width_mux) - 1;
> > + mux->lock = &sun4i_a10_display_lock;
> > +
> > + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
> > + if (!gate)
> > + goto free_mux;
> > +
> > + gate->reg = reg;
> > + gate->bit_idx = data->offset_en;
> > + gate->lock = &sun4i_a10_display_lock;
> > +
> > + if (data->has_div) {
> > + div = kzalloc(sizeof(*div), GFP_KERNEL);
> > + if (!div)
> > + goto free_gate;
> > +
> > + div->reg = reg;
> > + div->shift = data->offset_div;
> > + div->width = data->width_div;
> > + div->lock = &sun4i_a10_display_lock;
> > + }
> > +
> > + clk = clk_register_composite(NULL, clk_name,
> > + parents, data->parents,
> > + &mux->hw, &clk_mux_ops,
> > + data->has_div ? &div->hw : NULL,
> > + data->has_div ? &clk_divider_ops : NULL,
> > + &gate->hw, &clk_gate_ops,
> > + 0);
> > + if (IS_ERR(clk)) {
> > + pr_err("%s: Couldn't register the clock\n", clk_name);
> > + goto free_div;
> > + }
> > +
> > + of_clk_add_provider(node, of_clk_src_simple_get, clk);
>
> Check for errors?
Yep.
> > +
> > + if (!data->has_rst)
> > + return;
> > +
> > + reset_data = kzalloc(sizeof(*reset_data), GFP_KERNEL);
> > + if (!reset_data)
> > + goto free_clk;
> > +
> > + reset_data->reg = reg;
> > + reset_data->offset = data->offset_rst;
> > + reset_data->lock = &sun4i_a10_display_lock;
> > + reset_data->rcdev.nr_resets = 1;
> > + reset_data->rcdev.ops = &sun4i_a10_display_reset_ops;
> > + reset_data->rcdev.of_node = node;
> > + reset_data->rcdev.of_reset_n_cells = 0;
> > + reset_data->rcdev.of_xlate = &sun4i_a10_display_reset_xlate;
> > +
> > + if (reset_controller_register(&reset_data->rcdev)) {
> > + pr_err("%s: Couldn't register the reset controller\n",
> > + clk_name);
> > + goto free_reset;
> > + }
> > +
> > + return;
> > +
> > +free_reset:
> > + kfree(reset_data);
> > +free_clk:
> > + clk_unregister(clk);
> > +free_div:
> > + if (data->has_div)
> > + kfree(div);
> > +free_gate:
> > + kfree(gate);
> > +free_mux:
> > + kfree(mux);
>
> Cleanup after of_io_request_and_map()?
Hmm, indeed...
>
> > +}
> > +
> > +static struct sun4i_a10_display_clk_data sun4i_a10_tcon_ch0_data = {
> > + .has_rst = true,
> > + .parents = 4,
> > + .offset_en = 31,
> > + .offset_rst = 29,
>
> My datasheets (A10 v1.5, A20 v1.4), say bit 30 for LCD0 ch0 reset.
>
> A13 and R8 manuals do not list this clock, but A10s does, which has
> bit 30 for LCD reset and bit 29 for TV encoder reset.
>
> I suggest changing has_rst to int, and for sun5i variant, have
> has_rst = 2, reset_cells = 1, for 2 separate reset controls.
> The tcon and tv encoder bits of the DTSI should be updated as
> well.
>
> I assume your tests work because U-boot already de-asserted the
> resets (both if you're using composite output).
You're right, I'll fix it as you suggested.
> > + .offset_mux = 24,
> > + .width_mux = 2,
> > +};
> > +
> > +static void __init sun4i_a10_tcon_ch0_setup(struct device_node *node)
> > +{
> > + sun4i_a10_display_init(node, &sun4i_a10_tcon_ch0_data);
> > +}
> > +CLK_OF_DECLARE(sun4i_a10_tcon_ch0, "allwinner,sun4i-a10-tcon-ch0-clk",
> > + sun4i_a10_tcon_ch0_setup);
> > +
> > +static struct sun4i_a10_display_clk_data sun4i_a10_display_data = {
> > + .has_div = true,
>
> Missing .has_rst = true.
Indeed
> > + .parents = 3,
> > + .offset_en = 31,
> > + .offset_rst = 30,
> > + .offset_mux = 24,
> > + .offset_div = 0,
>
> This is already implied.
Because the structure would already by initialised to 0?
Yeah, true, but I wanted to make that explicit that the div offset is
actually 0, and not something that got forgotten.
Thanks!
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]
next prev parent reply other threads:[~2016-02-03 20:18 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-14 15:24 [PATCH v2 00/26] drm: Add Allwinner A10 display engine support Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 01/26] reset: Move DT cell size check to the core Maxime Ripard
2016-01-15 15:50 ` Philipp Zabel
2016-01-14 15:24 ` [PATCH v2 02/26] reset: Make reset_control_ops const Maxime Ripard
2016-01-15 15:50 ` Philipp Zabel
2016-01-14 15:24 ` [PATCH v2 03/26] clk: Add regmap support Maxime Ripard
2016-01-28 7:56 ` Stephen Boyd
2016-01-14 15:24 ` [PATCH v2 04/26] clk: composite: Add unregister function Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 05/26] clk: sunxi: Add display and TCON0 clocks driver Maxime Ripard
2016-01-15 3:01 ` Rob Herring
2016-01-16 14:08 ` [linux-sunxi] " Priit Laes
2016-01-16 15:29 ` Chen-Yu Tsai
2016-02-03 20:18 ` Maxime Ripard [this message]
2016-01-14 15:24 ` [PATCH v2 06/26] clk: sunxi: Add PLL3 clock Maxime Ripard
2016-01-15 3:02 ` Rob Herring
2016-01-16 16:05 ` Chen-Yu Tsai
2016-02-03 20:27 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 07/26] clk: sunxi: Add TCON channel1 clock Maxime Ripard
2016-01-15 3:03 ` Rob Herring
2016-01-16 16:36 ` Chen-Yu Tsai
2016-02-03 20:29 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 08/26] clk: sun5i: add DRAM gates Maxime Ripard
2016-01-15 3:04 ` Rob Herring
2016-01-14 15:24 ` [PATCH v2 09/26] ARM: sun5i: dt: Add pll3 and pll7 clocks Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 10/26] ARM: sun5i: a13: Add display and TCON clocks Maxime Ripard
2016-01-16 17:06 ` Chen-Yu Tsai
2016-02-03 20:31 ` Maxime Ripard
2016-02-05 9:49 ` Chen-Yu Tsai
2016-01-14 15:24 ` [PATCH v2 11/26] ARM: sun5i: Add DRAM gates Maxime Ripard
2016-01-16 17:10 ` Chen-Yu Tsai
2016-02-03 20:36 ` Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 12/26] ARM: sun5i: Add TV encoder gate to the DTSI Maxime Ripard
2016-01-16 17:12 ` Chen-Yu Tsai
2016-01-14 15:24 ` [PATCH v2 13/26] drm/fb_cma_helper: Remove implicit call to disable_unused_functions Maxime Ripard
2016-01-14 23:13 ` Laurent Pinchart
2016-01-15 10:17 ` Daniel Vetter
2016-01-24 22:19 ` Laurent Pinchart
2016-01-25 7:29 ` Daniel Vetter
2016-01-25 19:02 ` Laurent Pinchart
2016-01-14 15:24 ` [PATCH v2 14/26] drm/modes: Rewrite the command line parser Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 15/26] drm/modes: Support modes names on the command line Maxime Ripard
2016-01-14 15:24 ` [PATCH v2 16/26] drm: Add Allwinner A10 Display Engine support Maxime Ripard
2016-01-16 15:11 ` [linux-sunxi] " Priit Laes
2016-01-17 12:58 ` Priit Laes
2016-01-19 15:38 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 17/26] drm: sun4i: Add DT bindings documentation Maxime Ripard
2016-01-15 3:15 ` Rob Herring
2016-02-03 19:59 ` Maxime Ripard
2016-02-03 20:19 ` Rob Herring
2016-02-03 20:47 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 18/26] drm: sun4i: Add RGB output Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 19/26] drm: sun4i: Add composite output Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 20/26] drm: sun4i: tv: Add PAL output standard Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 21/26] drm: sun4i: tv: Add NTSC " Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 22/26] ARM: sun5i: r8: Add display blocks to the DTSI Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 23/26] ARM: sun5i: chip: Enable the TV Encoder Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 24/26] devicetree: Add olimex vendor prefix Maxime Ripard
2016-01-15 3:15 ` Rob Herring
2016-01-15 6:41 ` Stefan Wahren
2016-01-15 8:05 ` Maxime Ripard
2016-01-14 15:25 ` [PATCH v2 25/26] drm/panel: simple: Add timings for the Olimex LCD-OLinuXino-4.3TS Maxime Ripard
2016-01-15 3:17 ` Rob Herring
2016-01-14 15:25 ` [PATCH v2 26/26] DO NOT MERGE: ARM: sun5i: chip: Enable the LCD panel Maxime Ripard
2016-02-20 13:45 ` [linux-sunxi] [PATCH v2 00/26] drm: Add Allwinner A10 display engine support Priit Laes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160203201834.GC3327@lukather \
--to=maxime.ripard@free-electrons.com \
--cc=airlied@linux.ie \
--cc=alex@nextthing.co \
--cc=boris.brezillon@free-electrons.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hdegoede@redhat.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robdclark@gmail.com \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
--cc=thomas.petazzoni@free-electrons.com \
--cc=wens@csie.org \
--cc=wynter@nextthing.co \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).