From: Bjorn Helgaas <bhelgaas@google.com>
To: Joao Pinto <Joao.Pinto@synopsys.com>
Cc: mark.rutland@arm.com, Alexey.Brodkin@synopsys.com, arnd@arndb.de,
pawel.moll@arm.com, ijc+devicetree@hellion.org.uk,
linux-pci@vger.kernel.org, Vineet.Gupta1@synopsys.com,
Pratyush Anand <pratyush.anand@gmail.com>,
linux-kernel@vger.kernel.org, CARLOS.PALMINHA@synopsys.com,
robh+dt@kernel.org, Murali Karicheri <m-karicheri2@ti.com>,
galak@codeaurora.org, Jingoo Han <jingoohan1@gmail.com>,
linux-snps-arc@lists.infradead.org
Subject: [PATCH v10 1/4] ARC: Add PCI support
Date: Thu, 25 Feb 2016 11:37:28 -0600 [thread overview]
Message-ID: <20160225173728.2103.69952.stgit@bhelgaas-glaptop2.roam.corp.google.com> (raw)
In-Reply-To: <20160225172957.2103.8326.stgit@bhelgaas-glaptop2.roam.corp.google.com>
From: Joao Pinto <Joao.Pinto@synopsys.com>
Add PCI support to ARC and update drivers/pci Makefile enabling the ARC
arch to use the generic PCI setup functions.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
---
arch/arc/Kconfig | 26 ++++++++++++++++++++++++++
arch/arc/include/asm/dma.h | 5 +++++
arch/arc/include/asm/io.h | 9 +++++++++
arch/arc/include/asm/pci.h | 31 +++++++++++++++++++++++++++++++
arch/arc/kernel/Makefile | 1 +
arch/arc/kernel/pcibios.c | 22 ++++++++++++++++++++++
arch/arc/plat-axs10x/Kconfig | 1 +
drivers/pci/Makefile | 1 +
8 files changed, 96 insertions(+)
create mode 100644 arch/arc/include/asm/pci.h
create mode 100644 arch/arc/kernel/pcibios.c
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 76dde9d..f9e3b357 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,6 +19,7 @@ config ARC
select GENERIC_FIND_FIRST_BIT
# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
select GENERIC_PENDING_IRQ if SMP
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
@@ -39,6 +40,9 @@ config ARC
select PERF_USE_VMALLOC
select HAVE_DEBUG_STACKOVERFLOW
+config MIGHT_HAVE_PCI
+ bool
+
config TRACE_IRQFLAGS_SUPPORT
def_bool y
@@ -568,6 +572,28 @@ endmenu # "ARC Architecture Configuration"
source "mm/Kconfig"
source "net/Kconfig"
source "drivers/Kconfig"
+
+menu "Bus Support"
+
+config PCI
+ bool "PCI support" if MIGHT_HAVE_PCI
+ help
+ PCI is the name of a bus system, i.e., the way the CPU talks to
+ the other stuff inside your box. Find out if your board/platform
+ has PCI.
+
+ Note: PCIe support for Synopsys Device will be available only
+ when HAPS DX is configured with PCIe RC bitmap. If you have PCI,
+ say Y, otherwise N.
+
+config PCI_SYSCALL
+ def_bool PCI
+
+source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
+endmenu
+
source "fs/Kconfig"
source "arch/arc/Kconfig.debug"
source "security/Kconfig"
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index ca7c451..01e47a6 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -10,5 +10,10 @@
#define ASM_ARC_DMA_H
#define MAX_DMA_ADDRESS 0xC0000000
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy 0
+#endif
#endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 694ece8..947bf0c 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -16,6 +16,15 @@
extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+ return (void __iomem *)port;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
+
extern void iounmap(const void __iomem *addr);
#define ioremap_nocache(phy, sz) ioremap(phy, sz)
diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
new file mode 100644
index 0000000..2f2011c
--- /dev/null
+++ b/arch/arc/include/asm/pci.h
@@ -0,0 +1,31 @@
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
+
+#include <linux/ioport.h>
+
+#define PCIBIOS_MIN_IO 0x100
+#define PCIBIOS_MIN_MEM 0x100000
+
+#define pcibios_assign_all_busses() 1
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS 1
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e7f3625..1bc2036 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -12,6 +12,7 @@ obj-y := arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
obj-y += signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
obj-$(CONFIG_ISA_ARCOMPACT) += entry-compact.o intc-compact.o
obj-$(CONFIG_ISA_ARCV2) += entry-arcv2.o intc-arcv2.o
+obj-$(CONFIG_PCI) += pcibios.o
obj-$(CONFIG_MODULES) += arcksyms.o module.o
obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c
new file mode 100644
index 0000000..72e1d73
--- /dev/null
+++ b/arch/arc/kernel/pcibios.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+
+/*
+ * We don't have to worry about legacy ISA devices, so nothing to do here
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+ resource_size_t size, resource_size_t align)
+{
+ return res->start;
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+}
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index d475f9d..426ac4b 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
select DW_APB_ICTL
select GPIO_DWAPB
select OF_GPIO
+ select MIGHT_HAVE_PCI
select GENERIC_IRQ_CHIP
select ARCH_REQUIRE_GPIOLIB
help
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index be3f631..2154092 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
# Some architectures use the generic PCI setup functions
#
obj-$(CONFIG_ALPHA) += setup-irq.o
+obj-$(CONFIG_ARC) += setup-irq.o
obj-$(CONFIG_ARM) += setup-irq.o
obj-$(CONFIG_ARM64) += setup-irq.o
obj-$(CONFIG_UNICORE32) += setup-irq.o
next prev parent reply other threads:[~2016-02-25 17:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-25 17:37 [PATCH v10 0/4] Add PCI support to AXS10x Bjorn Helgaas
2016-02-25 17:37 ` Bjorn Helgaas [this message]
2016-02-26 2:41 ` [PATCH v10 1/4] ARC: Add PCI support Joao Pinto
2016-02-25 17:37 ` [PATCH v10 2/4] PCI: designware: Add generic dw_pcie_wait_for_link() Bjorn Helgaas
2016-02-26 2:42 ` Joao Pinto
2016-02-26 16:06 ` Bjorn Helgaas
2016-02-29 11:35 ` Joao Pinto
2016-02-25 17:37 ` [PATCH v10 3/4] PCI: designware: Add default link up check if sub-driver doesn't override Bjorn Helgaas
2016-02-25 17:37 ` [PATCH v10 4/4] PCI: designware: Add driver for prototyping kits based on ARC SDP Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160225173728.2103.69952.stgit@bhelgaas-glaptop2.roam.corp.google.com \
--to=bhelgaas@google.com \
--cc=Alexey.Brodkin@synopsys.com \
--cc=CARLOS.PALMINHA@synopsys.com \
--cc=Joao.Pinto@synopsys.com \
--cc=Vineet.Gupta1@synopsys.com \
--cc=arnd@arndb.de \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=jingoohan1@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-snps-arc@lists.infradead.org \
--cc=m-karicheri2@ti.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=pratyush.anand@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).