On Thu, Mar 17, 2016 at 12:04:26AM +0800, Vishnu Patekar wrote: > APB1 is similar to sun4i-a10-apb0-clk, except different dividers. > > This adds support for apb1 on A83T. > > Signed-off-by: Vishnu Patekar > Acked-by: Rob Herring > --- > Documentation/devicetree/bindings/clock/sunxi.txt | 1 + > drivers/clk/sunxi/clk-sunxi.c | 13 +++++++++++++ > 2 files changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt > index cba9fe55..291d366 100644 > --- a/Documentation/devicetree/bindings/clock/sunxi.txt > +++ b/Documentation/devicetree/bindings/clock/sunxi.txt > @@ -51,6 +51,7 @@ Required properties: > "allwinner,sun8i-h3-apb0-gates-clk" - for the APB0 gates on H3 > "allwinner,sun9i-a80-apb0-gates-clk" - for the APB0 gates on A80 > "allwinner,sun4i-a10-apb1-clk" - for the APB1 clock > ++ "allwinner,sun8i-a83t-apb1-clk" - for the APB1 clock on A83T There's one '+' too many Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com