From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758853AbcDEQlh (ORCPT ); Tue, 5 Apr 2016 12:41:37 -0400 Received: from mail.kernel.org ([198.145.29.136]:33696 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757763AbcDEQld (ORCPT ); Tue, 5 Apr 2016 12:41:33 -0400 Date: Tue, 5 Apr 2016 11:41:22 -0500 From: Bjorn Helgaas To: Tomasz Nowicki Cc: Jayachandran Chandrashekaran Nair , Arnd Bergmann , Will Deacon , Catalin Marinas , rafael@kernel.org, Hanjun Guo , Lorenzo Pieralisi , okaya@codeaurora.org, jiang.liu@linux.intel.com, Jayachandran Chandrashekaran Nair , Stefano Stabellini , robert.richter@caviumnetworks.com, Marcin Wojtas , Liviu.Dudau@arm.com, David Daney , wangyijing@huawei.com, Suravee.Suthikulpanit@amd.com, msalter@redhat.com, linux-pci@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-acpi@vger.kernel.org, linux-kernel@vger.kernel.org, linaro-acpi@lists.linaro.org, Jon Masters Subject: Re: [PATCH V5 01/15] ACPI: MCFG: Move mmcfg_list management to drivers/acpi Message-ID: <20160405164122.GA9419@localhost> References: <1455630825-27253-1-git-send-email-tn@semihalf.com> <1455630825-27253-2-git-send-email-tn@semihalf.com> <20160303225152.GA10472@localhost> <20160305041443.GA15110@localhost> <56DFE91E.10105@semihalf.com> <5703C7AB.2000306@semihalf.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <5703C7AB.2000306@semihalf.com> User-Agent: Mutt/1.5.21 (2010-09-15) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi Tomasz, On Tue, Apr 05, 2016 at 04:11:55PM +0200, Tomasz Nowicki wrote: > On 09.03.2016 10:13, Tomasz Nowicki wrote: > >Hi Bjorn, > > > >Thanks for your pointers! See my comments inline. Aslo, can you please > >have a look at my previous patch set v4 and check how many of your > >comments are already addressed there. We may want to back to it then. > > > >https://lkml.org/lkml/2016/2/4/646 > >Especially patches [0-6] which handle MMCONFIG refactoring. > > > > > >On 05.03.2016 05:14, Bjorn Helgaas wrote: > >>On Fri, Mar 04, 2016 at 02:05:56PM +0530, Jayachandran Chandrashekaran > >>Nair wrote: > >>>On Fri, Mar 4, 2016 at 4:21 AM, Bjorn Helgaas > >>>wrote: > >>>>Hi Tomasz, Jayachandran, et al, > >>>> > >>>>On Tue, Feb 16, 2016 at 02:53:31PM +0100, Tomasz Nowicki wrote: > >>>>>From: Jayachandran C > >>>>> > >>>>>Move pci_mmcfg_list handling to a drivers/acpi/pci_mcfg.c. This is > >>>>>to share the API and code with ARM64 later. The corresponding > >>>>>declarations are moved from asm/pci_x86.h to linux/pci-acpi.h > >>>>> > >>>>>As a part of this we introduce three functions that can be > >>>>>implemented by the arch code: pci_mmconfig_map_resource() to map a > >>>>>mcfg entry, pci_mmconfig_unmap_resource to do the corresponding > >>>>>unmap and pci_mmconfig_enabled to see if the arch setup of > >>>>>mcfg entries was successful. We also provide weak implementations > >>>>>of these, which will be used from ARM64. On x86, we retain the > >>>>>old logic by providing platform specific implementation. > >>>>> > >>>>>This patch is purely rearranging code, it should not have any > >>>>>impact on the logic of MCFG parsing or list handling. > >>>> > >>>>I definitely want to figure out how to make this work well on ARM64. > >>>>I need to ponder this some more, so these are just some initial > >>>>thoughts. > >>>> > >>>>My first impression is that (a) the x86 MCFG code is an unmitigated > >>>>disaster, and (b) we're trying a little too hard to make that mess > >>>>generic. I think we might be better served if we came up with some > >>>>cleaner, more generic code that we can use for ARM64 today, and > >>>>migrate x86 toward that over time. > >>>> > >>>>My concern is that if we elevate the current x86 code to be > >>>>"arch-independent", we will be perpetuating some interfaces and > >>>>designs that shouldn't be allowed to escape arch/x86. > >>> > >>>I think the major decision is whether to maintain the pci_mmcfg_list > >>>for all architectures or not. My initial plan was not to do this because > >>>of the mess (basically the ECAM region info should be attached to > >>>the pci root and not maintained in a separate list that needs locking), > >>>The patch I posted initially https://patchwork.ozlabs.org/patch/553464/ > >>>had a much simpler way of handling the MCFG table without using > >>>the list. > >> > >>I agree that ECAM info should be attached to the PCI host controller. > >>That should simplify locking and hot-add and hot-removal of host > >>controllers. > >> > >>I think pci_mmcfg_list is an implementation detail that may not need > >>to be generic. I certainly don't think it needs to be part of the > >>interface. > >> > >>>In x86 case it is not feasible to remove using the pci_mmcfg_list. > >>>The only use of it outside is in xen that can be fixed up. > >>> > >>>>Some of the code that moved to drivers/acpi/pci_mcfg.c is not really > >>>>ACPI-specific, and could potentially be used for non-ACPI bridges that > >>>>support ECAM. I'd like to see that sort of code moved to a new file > >>>>like drivers/pci/ecam.c. > >>>> > >>>>There's a little bit of overlap here with the ECAM code in > >>>>pci-host-generic.c. I'm not sure whether or how to include that, but > >>>>it's a very good example of how simple this *should* be: probe the > >>>>host bridge, discover the ECAM region, request the region, ioremap it, > >>>>done. > >>> > >>>I had a similar approach in my initial patchset, please see the patch > >>>above. The resource for ECAM is mapped similar to the the way > >>>pci-host-generic.c handled it. An additional step I could do was to > >>>move the common code (ioremap and mapbus) into a common > >>>file and share the code with pci-host-generic.c > >>> > >>>>>diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c > >>>>>new file mode 100644 > >>>>>index 0000000..ea84365 > >>>>>--- /dev/null > >>>>>+++ b/drivers/acpi/pci_mcfg.c > >>>>>... > >>>>>+int __weak pci_mmconfig_map_resource(struct device *dev, > >>>>>+ struct pci_mmcfg_region *mcfg) > >>>>>+{ > >>>>>+ struct resource *tmp; > >>>>>+ void __iomem *vaddr; > >>>>>+ > >>>>>+ tmp = insert_resource_conflict(&iomem_resource, &mcfg->res); > >>>>>+ if (tmp) { > >>>>>+ dev_warn(dev, "MMCONFIG %pR conflicts with %s %pR\n", > >>>>>+ &mcfg->res, tmp->name, tmp); > >>>>>+ return -EBUSY; > >>>>>+ } > >>>> > >>>>I think this is a mistake in the x86 MCFG support that we should not > >>>>carry over to a generic implementation. We should not use the MCFG > >>>>table for resource reservation because MCFG is not defined by the ACPI > >>>>spec and an OS need not include support for it. The platform must > >>>>indicate in some other, more generic way, that ECAM space is reserved. > >>>>This probably means ECAM space should be declared in a PNP0C02 _CRS > >>>>method (see the PCI Firmware Spec r3.0, sec 4.1.2, note 2). > >>>> > >>>>We might need some kind of x86-specific quirk that does this, or a > >>>>pcibios hook or something here; I just don't think it should be > >>>>generic. > >>>> > >>>>>+int __init pci_mmconfig_parse_table(void) > >>>>>+{ > >>>>>+ return acpi_sfi_table_parse(ACPI_SIG_MCFG, pci_parse_mcfg); > >>>>>+} > >>>> > >>>>I don't like the fact that we parse the entire MCFG table at once > >>>>here. I think we should look for the information we need when we are > >>>>claiming a PCI host bridge, e.g., in acpi_pci_root_add(). This might > >>>>not be a great fit for the way ACPI table management works, but I > >>>>think it's better to do things on-demand rather than just-in-case. > >>> > >>>There is an overhead of looking up this table, and the information > >>>available there is very limited (i.e, segment, start_bus, end_bus > >>>and address). My approach in the above patch is to save this info > >>>into an array at boot time and avoid multiple lookups. > >> > >>We need to look up MCFG info once per host bridge, so I don't think > >>there's any performance issue here. But we do use acpi_table_parse(), > >>which is __init, and *that* is a reason why we might need to parse the > >>entire MCFG at boot-time. But this is the least of our worries in any > >>case. > >> > >>>>>diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h > >>>>>index 89ab057..e9450ef 100644 > >>>>>--- a/include/linux/pci-acpi.h > >>>>>+++ b/include/linux/pci-acpi.h > >>>>>@@ -106,6 +106,39 @@ extern const u8 pci_acpi_dsm_uuid[]; > >>>>> #define RESET_DELAY_DSM 0x08 > >>>>> #define FUNCTION_DELAY_DSM 0x09 > >>>>> > >>>>>+/* common API to maintain list of MCFG regions */ > >>>>>+/* "PCI MMCONFIG %04x [bus %02x-%02x]" */ > >>>>>+#define PCI_MMCFG_RESOURCE_NAME_LEN (22 + 4 + 2 + 2) > >>>>>+ > >>>>>+struct pci_mmcfg_region { > >>>>>+ struct list_head list; > >>>>>+ struct resource res; > >>>>>+ u64 address; > >>>>>+ char __iomem *virt; > >>>>>+ u16 segment; > >>>>>+ u8 start_bus; > >>>>>+ u8 end_bus; > >>>>>+ char name[PCI_MMCFG_RESOURCE_NAME_LEN]; > >>>>>+}; > >>>>>+ > >>>>>+extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 > >>>>>start, u8 end, > >>>>>+ phys_addr_t addr); > >>>>>+extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end); > >>>>>+ > >>>>>+extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, > >>>>>int bus); > >>>>>+extern struct pci_mmcfg_region *pci_mmconfig_add(int segment, int > >>>>>start, > >>>>>+ int end, u64 > >>>>>addr); > >>>>>+extern int pci_mmconfig_map_resource(struct device *dev, > >>>>>+ struct pci_mmcfg_region *mcfg); > >>>>>+extern void pci_mmconfig_unmap_resource(struct pci_mmcfg_region > >>>>>*mcfg); > >>>>>+extern int pci_mmconfig_enabled(void); > >>>>>+extern int __init pci_mmconfig_parse_table(void); > >>>>>+ > >>>>>+extern struct list_head pci_mmcfg_list; > >>>>>+ > >>>>>+#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20) > >>>>>+#define PCI_MMCFG_OFFSET(bus, devfn) ((bus) << 20 | (devfn) << 12) > >>>>>+ > >>>> > >>>>With the exception of pci_mmconfig_parse_table(), nothing here is > >>>>ACPI-specific. I'd like to see the PCI ECAM-related interfaces > >>>>(hopefully not these exact ones, but a more rational set) put in > >>>>something like include/linux/pci-ecam.h. > >>>> > >>>>> #else /* CONFIG_ACPI */ > >>>>> static inline void acpi_pci_add_bus(struct pci_bus *bus) { } > >>>>> static inline void acpi_pci_remove_bus(struct pci_bus *bus) { } > >>> > >>>I can update this patch to > >>> - drop the pci_mmcfg_list handling from generic case > >>> - move common ECAM code so that it can be shared with > >>> pci-host-generic.c > >>>if that is what you are looking for. The code will end up looking much > >>>simpler. > >> > >>I think we should ignore x86 mmconfig for now. It is absurdly > >>complicated and I'm not sure it's fixable. I *do* want to keep > >>drivers/acpi/pci_root.c for all ACPI host bridges, including x86, > >>ia64, and arm64. > >> > >>So I think we should write generic MCFG and ECAM support from scratch > >>for arm64. Something like this: > >> > >> - Add an acpi_mcfg_init(), maybe in drivers/acpi/pci_mcfg.c, to be > >> called from acpi_init() to copy MCFG info to something we can > >> access after __init. This would not reserve resources, but > >> probably does have to ioremap() the regions to support > >> raw_pci_read(). > > > >As said, ECAM and ACPI specific code was isolated in previous patch. > >There, I tried to leave x86 complication in arch/x86/ and extract > >generic functionalities to driver/pci/ecam.c as the library. > > > >> > >> - Implement raw_pci_read(), which is "special" because ACPI needs it > >> for PCI config access from AML. It's supposed to be "always > >> accessible" and we don't have a struct pci_bus *, so this probably > >> has to use the MCFG copy and the ioremap done above. Maybe it > >> should go in the same file. This is completely independent of > >> the PCI core and PCI data structures. > >We were looking for the answer which would justify RAW PCI config > >accessors being for ARM64 world. Unfortunately, nobody was able to show > >real use case for ARM64. Do you see the reason we need this? Our > >conclusion was to leave it empty for ARM64 which in turn makes code > >simpler. I am not ASWG member while that was under discussion so I will > >ask Lorenzo to elaborate more on this. > > > >> > >> - Implement arm64 pci_acpi_scan_root() that calls > >> acpi_pci_root_create() with an .init_info() function that calls > >> acpi_pci_root_get_mcfg_addr() to read _CBA, and if that fails, > >> looks up the bus range in the MCFG copy from above. It should > >> call request_mem_region(). For a region from _CBA, it should call > >> ioremap(). For regions from MCFG it can probably use the ioremap > >> done by acpi_mcfg_init(). > >Yes, Expanding .init_info() to check for _CBA is good point. > > > >> > >> I know acpi_pci_root_add() calls acpi_pci_root_get_mcfg_addr() > >> before calling pci_acpi_scan_root(), but I think that's wrong > >> because (a) some arches, e.g., ia64, don't use ECAM and (b) _CBA > >> and MCFG should be handled in the same place. > >> > >> I know calling request_mem_region() here will probably be an > >> ordering problem because the PNP0C02 driver hasn't reserved > >> resources yet. But the host bridge driver is using the region and > >> it should reserve it. > >> > >> - If we store the ECAM mapped base address in the sysdata or struct > >> pci_host_bridge, the normal config accessors can use > >> pci_generic_config_read() with a new generic .map_bus() function. > > > >pci_generic_config_{read|write}() is what we want to use, actually we do > >now, but ECAM region and sysdata association will remove ECAM region > >lookup step (see patch 09/15 of this series). > > > >> > >> On x86, the normal config access path is: > >> > >> pci_read(struct pci_bus *, ...) > >> raw_pci_read(seg, bus#, ...) > >> raw_pci_ext_ops->read(seg, bus#, ...) > >> pci_mmcfg_read(seg, bus#, ...) > >> pci_dev_base > >> pci_mmconfig_lookup(seg, bus#) > >> > >> I think this is somewhat backwards because we start with a pci_bus > >> pointer, so we *could* have a nice simple bus-specific accessor, > >> but we throw that pointer away, so pci_mmcfg_read() has to start > >> over and look up the ECAM offset from scratch, which makes it all > >> unnecessarily complicated. > >> > > > >As you pointed out raw_pci_{read|write} make things complicated, so IMO > >we should either say they are absolutely necessary (and then think how > >to simplify it) or just use simple bus-specific accessor (patch 02/15) > >e.g. for ARM64. > > > >Any comments appreciated. > > Kindly reminder. I would like to move on with this patch set. Can > you please comments on it so that we could decide which way to go. Can you repost your current proposal with a version number higher than any previous ones? It's OK if the content is the same as v4; I just think it's confusing if we resurrect v4 and have to follow discussion from v3 to v4 to v5 and back to v4. The archives would be a bit of a muddle. Bjorn