linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <sboyd@codeaurora.org>
To: James Liao <jamesjj.liao@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>,
	Mike Turquette <mturquette@baylibre.com>,
	Rob Herring <robh@kernel.org>, John Crispin <blogic@openwrt.org>,
	Arnd Bergmann <arnd@arndb.de>,
	Sascha Hauer <kernel@pengutronix.de>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org,
	linux-clk@vger.kernel.org, srv_heupstream@mediatek.com,
	Shunli Wang <shunli.wang@mediatek.com>
Subject: Re: [PATCH v7 4/9] clk: mediatek: Add MT2701 clock support
Date: Fri, 6 May 2016 16:11:51 -0700	[thread overview]
Message-ID: <20160506231151.GI3492@codeaurora.org> (raw)
In-Reply-To: <1460621514-65191-5-git-send-email-jamesjj.liao@mediatek.com>

On 04/14, James Liao wrote:
> diff --git a/drivers/clk/mediatek/clk-mt2701.c b/drivers/clk/mediatek/clk-mt2701.c
> new file mode 100644
> index 0000000..b4db141
> --- /dev/null
> +++ b/drivers/clk/mediatek/clk-mt2701.c
> +static void __init mtk_infrasys_init(struct device_node *node)
> +{
> +	struct clk_onecell_data *clk_data;
> +	int r;
> +
> +	clk_data = mtk_alloc_clk_data(CLK_INFRA_NR);
> +
> +	mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
> +						clk_data);
> +	mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs),
> +						clk_data);
> +
> +	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> +	if (r)
> +		pr_err("%s(): could not register clock provider: %d\n",
> +			__func__, r);
> +}
> +CLK_OF_DECLARE(mtk_infrasys, "mediatek,mt2701-infracfg", mtk_infrasys_init);

I'm still lost on the usage of CLK_OF_DECLARE here. What part of
these clk controllers needs to be registered to make the timer
work?

> +	GATE_DISP1(CLK_MM_DPI_DIGL, "mm_dpi_digl", "dpi0_sel", 2),
> +	GATE_DISP1(CLK_MM_DPI_ENGINE, "mm_dpi_eng", "mm_sel", 3),
> +	GATE_DISP1(CLK_MM_DPI1_DIGL, "mm_dpi1_digl", "dpi1_sel", 4),
> +	GATE_DISP1(CLK_MM_DPI1_ENGINE, "mm_dpi1_eng", "mm_sel", 5),
> +	GATE_DISP1(CLK_MM_TVE_OUTPUT, "mm_tve_output", "tve_sel", 6),
> +	GATE_DISP1(CLK_MM_TVE_INPUT, "mm_tve_input", "dpi0_sel", 7),
> +	GATE_DISP1(CLK_MM_HDMI_PIXEL, "mm_hdmi_pixel", "dpi1_sel", 8),
> +	GATE_DISP1(CLK_MM_HDMI_PLL, "mm_hdmi_pll", "hdmi_sel", 9),
> +	GATE_DISP1(CLK_MM_HDMI_AUDIO, "mm_hdmi_audio", "apll_sel", 10),
> +	GATE_DISP1(CLK_MM_HDMI_SPDIF, "mm_hdmi_spdif", "apll_sel", 11),
> +	GATE_DISP1(CLK_MM_TVE_FMM, "mm_tve_fmm", "mm_sel", 14),
> +};

I also don't understand why we don't have different files and
drivers for all these different clock controllers? They all have
a similar probe structure, sure, but otherwise these are
different devices with different clks for them. The whole #ifdef
thing in the later patch would go away too.

> +	GATE_BDP1(CLK_BDP_BRG_RT_B, "brg_rt_bclk", "mm_sel", 12),
> +	GATE_BDP1(CLK_BDP_BRG_RT_DRAM, "brg_rt_dram", "mm_sel", 13),
> +	GATE_BDP1(CLK_BDP_LARBRT_DRAM, "larbrt_dram", "mm_sel", 14),
> +	GATE_BDP1(CLK_BDP_TMDS_SYN, "tmds_syn", "hdmi_0_pll340m", 15),
> +	GATE_BDP1(CLK_BDP_HDMI_MON, "hdmi_mon", "hdmi_0_pll340m", 16),
> +};
> +
> +static void __init mtk_bdpsys_init(struct device_node *node)

Shouldn't be __init because it's driver probe path.

> +{
> +	struct clk_onecell_data *clk_data;
> +	int r;
> +
> +	clk_data = mtk_alloc_clk_data(CLK_BDP_NR);
> +
> +	mtk_clk_register_gates(node, bdp_clks, ARRAY_SIZE(bdp_clks),
> +						clk_data);
> +
> +	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
> +	if (r)
> +		pr_err("%s(): could not register clock provider: %d\n",
> +			__func__, r);
> +}
[...]
> +
> +static int __init clk_probe(struct platform_device *pdev)
> +{
> +	void (*clk_init)(struct device_node *);
> +	const struct of_device_id *of_id;
> +
> +	of_id = of_match_node(of_clk_match_tbl, pdev->dev.of_node);
> +	if (!of_id || !of_id->data)
> +		return -EINVAL;
> +
> +	clk_init = of_id->data;
> +	clk_init(pdev->dev.of_node);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver clk_drv = {

Please add some mtk here, 'clk_drv' is too generic.

> +	.driver = {
> +		.name = "mtk-clk",
> +		.owner = THIS_MODULE,

This is unnecessary.

> +		.of_match_table = of_match_ptr(of_clk_match_tbl),

Just drop of_match_ptr() because it's not helping. Also
of_clk_match_tbl is too generic.

> +	},
> +};
> +
> +builtin_platform_driver_probe(clk_drv, clk_probe);
> +}
> diff --git a/drivers/clk/mediatek/clk-mtk.h b/drivers/clk/mediatek/clk-mtk.h
> index 32d2e45..8796acc 100644
> --- a/drivers/clk/mediatek/clk-mtk.h
> +++ b/drivers/clk/mediatek/clk-mtk.h
> @@ -145,8 +146,35 @@ struct mtk_gate {
[...]
> +struct mtk_clk_divider {
> +	int id;
> +	const char *name;
> +	const char *parent_name;
> +	unsigned long flags;
> +
> +	uint32_t div_reg;

u32 is shorter

> +	unsigned char div_shift;
> +	unsigned char div_width;
> +	unsigned char clk_divider_flags;
> +	const struct clk_div_table *clk_div_table;
> +};
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2016-05-06 23:11 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-14  8:11 [PATCH v7 0/9] Add clock support for Mediatek MT2701 James Liao
2016-04-14  8:11 ` [PATCH v7 1/9] clk: mediatek: Refine the makefile to support multiple clock drivers James Liao
2016-04-22  9:02   ` Matthias Brugger
2016-04-14  8:11 ` [PATCH v7 2/9] dt-bindings: ARM: Mediatek: Document bindings for MT2701 James Liao
2016-04-14  8:11 ` [PATCH v7 3/9] clk: mediatek: Add dt-bindings for MT2701 clocks James Liao
2016-04-22  9:06   ` Matthias Brugger
2016-04-14  8:11 ` [PATCH v7 4/9] clk: mediatek: Add MT2701 clock support James Liao
2016-04-22 18:43   ` Matthias Brugger
2016-05-06 23:11   ` Stephen Boyd [this message]
2016-05-09  6:38     ` James Liao
2016-05-09 22:29       ` Stephen Boyd
2016-05-10  2:30         ` James Liao
2016-04-14  8:11 ` [PATCH v7 5/9] reset: mediatek: Add MT2701 reset controller dt-binding file James Liao
2016-04-14  8:11 ` [PATCH v7 6/9] reset: mediatek: Add MT2701 reset driver James Liao
2016-04-14  8:11 ` [PATCH v7 7/9] clk: mediatek: Enable critical clocks for MT2701 James Liao
2016-05-06 23:12   ` Stephen Boyd
2016-05-09  5:40     ` James Liao
2016-05-09 22:13       ` Stephen Boyd
2016-05-10  2:20         ` James Liao
2016-05-11  2:51         ` James Liao
2016-04-14  8:11 ` [PATCH v7 8/9] clk: mediatek: Add config options for MT2701 subsystem clocks James Liao
2016-05-06 23:02   ` Stephen Boyd
2016-05-09  5:37     ` James Liao
2016-05-09 22:13       ` Stephen Boyd
2016-04-14  8:11 ` [PATCH v7 9/9] arm: dts: mt2701: Add clock controller device nodes James Liao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160506231151.GI3492@codeaurora.org \
    --to=sboyd@codeaurora.org \
    --cc=arnd@arndb.de \
    --cc=blogic@openwrt.org \
    --cc=devicetree@vger.kernel.org \
    --cc=djkurtz@chromium.org \
    --cc=jamesjj.liao@mediatek.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=shunli.wang@mediatek.com \
    --cc=srv_heupstream@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).