linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: Philipp Zabel <p.zabel@pengutronix.de>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Suman Anna <s-anna@ti.com>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	"Andrew F. Davis" <afd@ti.com>
Subject: [PATCH v3 1/2] Documentation: dt: reset: Add syscon reset binding
Date: Wed, 1 Jun 2016 13:41:24 -0500	[thread overview]
Message-ID: <20160601184125.20241-2-afd@ti.com> (raw)
In-Reply-To: <20160601184125.20241-1-afd@ti.com>

Add syscon reset controller binding. This will hook to the reset
framework and use syscon/regmap to set reset bits. This allows
reset control of individual SoC subsytems and devices with
memory-mapped reset registers in a common register memory
space.

Signed-off-by: Andrew F. Davis <afd@ti.com>
[s-anna@ti.com: revise the binding format]
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 .../devicetree/bindings/reset/syscon-reset.txt     | 105 +++++++++++++++++++++
 include/dt-bindings/reset/syscon.h                 |  23 +++++
 2 files changed, 128 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/syscon-reset.txt
 create mode 100644 include/dt-bindings/reset/syscon.h

diff --git a/Documentation/devicetree/bindings/reset/syscon-reset.txt b/Documentation/devicetree/bindings/reset/syscon-reset.txt
new file mode 100644
index 0000000..cec6e32
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/syscon-reset.txt
@@ -0,0 +1,105 @@
+SysCon Reset Controller
+=======================
+
+Almost all SoCs have hardware modules that require reset control in addition
+to clock and power control for their functionality. The reset control is
+typically provided by means of memory-mapped I/O registers. These registers are
+sometimes a part of a larger register space region implementing various
+functionalities. This register range is best represented as a syscon node to
+allow multiple entities to access their relevant registers in the common
+register space.
+
+A SysCon Reset Controller node defines a device that uses a syscon node
+and provides reset management functionality for various hardware modules
+present on the SoC.
+
+SysCon Reset Controller Node
+============================
+Each of the reset provider/controller nodes should be a child of a syscon
+node and have the following properties.
+
+Required properties:
+--------------------
+ - compatible		: Should be "syscon-reset"
+ - #reset-cells		: Should be 1. Please see the reset consumer node below
+			  for usage details
+
+SysCon Reset Child Node
+============================
+Each reset provider/controller node should have a child node for each reset
+it would like to expose to consumers.
+
+Required properties:
+--------------------
+ - reset-control	: Contains the reset control register information
+			  Should contain 3 cells defined as:
+			    Cell #1 : register offset of the reset
+			              control/status register from the syscon
+			              register base
+			    Cell #2 : bit shift value for the reset in the
+			              respective reset control/status register
+			    Cell #3 : polarity of the reset bit. Should be 1 or
+				      RESET_ASSERT_SET for resets that are
+				      asserted when the bit is set, 0 or
+				      RESET_ASSERT_CLEAR for resets that are
+				      asserted when the bit is cleared
+
+Optional properties:
+--------------------
+ - reset-status		: Contains the reset status register information. The
+			  contents of this property are the equivalent to
+			  reset-control as defined above. If this property is
+			  not present and the toggle flag is not set, the
+			  reset register is assumed to be the same as the
+			  control register
+ - toggle		: Mark this reset as a toggle only reset, this is used
+			  when no status register is available.
+
+SysCon Reset Consumer Nodes
+===========================
+Each of the reset consumer nodes should have the following properties,
+in addition to their own properties.
+
+Required properties:
+--------------------
+ - resets	: A phandle to the reset controller node and a phandle to a
+		  reset specifier node as defined above.
+
+Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
+common reset controller usage by consumers.
+
+Example:
+--------
+The following example demonstrates a syscon node, the reset controller node
+using the syscon node, and a consumer (a DSP device) on the TI Keystone 2
+Hawking SoC.
+
+/ {
+	soc {
+		psc: power-sleep-controller@02350000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x02350000 0x1000>;
+
+			pscrst: psc-reset {
+				compatible = "syscon-reset";
+				#reset-cells = <1>;
+
+				pscrst-dsp: dsp {
+					reset-control = <0xa3c 8 RESET_ASSERT_CLEAR>;
+					reset-status = <0x83c 8 RESET_ASSERT_CLEAR>;
+				};
+
+				pscrst-example: example {
+					reset-control = <0xa40 5 RESET_ASSERT_SET>;
+					toggle;
+				};
+			};
+		};
+
+		dsp0: dsp0 {
+			...
+			resets = <&pscrst &pscrst-dsp>;
+			...
+		};
+	};
+};
diff --git a/include/dt-bindings/reset/syscon.h b/include/dt-bindings/reset/syscon.h
new file mode 100644
index 0000000..9927779
--- /dev/null
+++ b/include/dt-bindings/reset/syscon.h
@@ -0,0 +1,23 @@
+/*
+ * Syscon Reset definitions
+ *
+ * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DT_BINDINGS_RESET_SYSCON_H__
+#define __DT_BINDINGS_RESET_SYSCON_H__
+
+#define RESET_ASSERT_CLEAR	0x0
+#define RESET_ASSERT_SET	0x1
+
+#endif
-- 
2.8.3

  reply	other threads:[~2016-06-01 18:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-01 18:41 [PATCH v3 0/2] Add support for SYSCON reset Andrew F. Davis
2016-06-01 18:41 ` Andrew F. Davis [this message]
2016-06-01 18:41 ` [PATCH v3 2/2] reset: add a SYSCON based reset driver Andrew F. Davis
2016-06-15 16:51   ` Suman Anna
2016-06-15 16:52     ` Andrew F. Davis
2016-06-15 15:48 ` [PATCH v3 0/2] Add support for SYSCON reset Andrew F. Davis
2016-06-15 16:45   ` Philipp Zabel
2016-06-16  2:13     ` Rob Herring
2016-06-20 18:44       ` Andrew F. Davis

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160601184125.20241-2-afd@ti.com \
    --to=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=p.zabel@pengutronix.de \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=s-anna@ti.com \
    --subject='Re: [PATCH v3 1/2] Documentation: dt: reset: Add syscon reset binding' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).