linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>, Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org, Hans de Goede <hdegoede@redhat.com>,
	Andre Przywara <andre.przywara@arm.com>,
	Rob Herring <robh+dt@kernel.org>,
	Vishnu Patekar <vishnupatekar0510@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	Boris Brezillon <boris.brezillon@free-electrons.com>,
	Jean-Francois Moine <moinejf@free.fr>,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Subject: [PATCH v2 13/15] clk: sunxi-ng: Add N-K-M-P factor clock
Date: Tue,  7 Jun 2016 22:41:52 +0200	[thread overview]
Message-ID: <20160607204154.31967-14-maxime.ripard@free-electrons.com> (raw)
In-Reply-To: <20160607204154.31967-1-maxime.ripard@free-electrons.com>

Introduce support for clocks that use a combination of two linear
multipliers (N and K factors), one linear divider (M) and one power of two
divider (P).

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

---
Changes from v1:
  - Declared our find_best function static
  - Fixed our set_rate function that was always writing the various factors
    at the same offset.
---
 drivers/clk/sunxi-ng/Makefile   |   1 +
 drivers/clk/sunxi-ng/ccu_nkmp.c | 167 ++++++++++++++++++++++++++++++++++++++++
 drivers/clk/sunxi-ng/ccu_nkmp.h |  73 ++++++++++++++++++
 3 files changed, 241 insertions(+)
 create mode 100644 drivers/clk/sunxi-ng/ccu_nkmp.c
 create mode 100644 drivers/clk/sunxi-ng/ccu_nkmp.h

diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index f157efe076fa..ddcf456df719 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -10,5 +10,6 @@ obj-y += ccu_mp.o
 obj-y += ccu_mux.o
 obj-y += ccu_nk.o
 obj-y += ccu_nkm.o
+obj-y += ccu_nkmp.o
 obj-y += ccu_nm.o
 obj-y += ccu_phase.o
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.c b/drivers/clk/sunxi-ng/ccu_nkmp.c
new file mode 100644
index 000000000000..9f2b98e19dc9
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.c
@@ -0,0 +1,167 @@
+/*
+ * Copyright (C) 2016 Maxime Ripard
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/rational.h>
+
+#include "ccu_gate.h"
+#include "ccu_nkmp.h"
+
+struct _ccu_nkmp {
+	unsigned long	n, max_n;
+	unsigned long	k, max_k;
+	unsigned long	m, max_m;
+	unsigned long	p, max_p;
+};
+
+static void ccu_nkmp_find_best(unsigned long parent, unsigned long rate,
+			       struct _ccu_nkmp *nkmp)
+{
+	unsigned long best_rate = 0;
+	unsigned long best_n = 0, best_k = 0, best_m = 0, best_p = 0;
+	unsigned long _n, _k, _m, _p;
+
+	for (_k = 1; _k <= nkmp->max_k; _k++) {
+		for (_p = 0; _p <= nkmp->max_p; _p++) {
+			unsigned long tmp_rate;
+
+			rational_best_approximation(rate / _k, parent >> _p,
+						    nkmp->max_n, nkmp->max_m,
+						    &_n, &_m);
+
+			tmp_rate = (parent * _n * _k >> _p) / _m;
+
+			if (tmp_rate > rate)
+				continue;
+
+			if ((rate - tmp_rate) < (rate - best_rate)) {
+				best_rate = tmp_rate;
+				best_n = _n;
+				best_k = _k;
+				best_m = _m;
+				best_p = _p;
+			}
+		}
+	}
+
+	nkmp->n = best_n;
+	nkmp->k = best_k;
+	nkmp->m = best_m;
+	nkmp->p = best_p;
+}
+
+static void ccu_nkmp_disable(struct clk_hw *hw)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+
+	return ccu_gate_helper_disable(&nkmp->common, nkmp->enable);
+}
+
+static int ccu_nkmp_enable(struct clk_hw *hw)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+
+	return ccu_gate_helper_enable(&nkmp->common, nkmp->enable);
+}
+
+static int ccu_nkmp_is_enabled(struct clk_hw *hw)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+
+	return ccu_gate_helper_is_enabled(&nkmp->common, nkmp->enable);
+}
+
+static unsigned long ccu_nkmp_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+	unsigned long n, m, k, p;
+	u32 reg;
+
+	reg = readl(nkmp->common.base + nkmp->common.reg);
+
+	n = reg >> nkmp->n.shift;
+	n &= (1 << nkmp->n.width) - 1;
+
+	k = reg >> nkmp->k.shift;
+	k &= (1 << nkmp->k.width) - 1;
+
+	m = reg >> nkmp->m.shift;
+	m &= (1 << nkmp->m.width) - 1;
+
+	p = reg >> nkmp->p.shift;
+	p &= (1 << nkmp->p.width) - 1;
+
+	return (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
+}
+
+static long ccu_nkmp_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+	struct _ccu_nkmp _nkmp;
+
+	_nkmp.max_n = 1 << nkmp->n.width;
+	_nkmp.max_k = 1 << nkmp->k.width;
+	_nkmp.max_m = 1 << nkmp->m.width;
+	_nkmp.max_p = (1 << nkmp->p.width) - 1;
+
+	ccu_nkmp_find_best(*parent_rate, rate,
+			   &_nkmp);
+
+	return (*parent_rate * _nkmp.n * _nkmp.k >> _nkmp.p) / _nkmp.m;
+}
+
+static int ccu_nkmp_set_rate(struct clk_hw *hw, unsigned long rate,
+			   unsigned long parent_rate)
+{
+	struct ccu_nkmp *nkmp = hw_to_ccu_nkmp(hw);
+	struct _ccu_nkmp _nkmp;
+	unsigned long flags;
+	u32 reg;
+
+	_nkmp.max_n = 1 << nkmp->n.width;
+	_nkmp.max_k = 1 << nkmp->k.width;
+	_nkmp.max_m = 1 << nkmp->m.width;
+	_nkmp.max_p = (1 << nkmp->p.width) - 1;
+
+	ccu_nkmp_find_best(parent_rate, rate, &_nkmp);
+
+	spin_lock_irqsave(nkmp->common.lock, flags);
+
+	reg = readl(nkmp->common.base + nkmp->common.reg);
+	reg &= ~GENMASK(nkmp->n.width + nkmp->n.shift - 1, nkmp->n.shift);
+	reg &= ~GENMASK(nkmp->k.width + nkmp->k.shift - 1, nkmp->k.shift);
+	reg &= ~GENMASK(nkmp->m.width + nkmp->m.shift - 1, nkmp->m.shift);
+	reg &= ~GENMASK(nkmp->p.width + nkmp->p.shift - 1, nkmp->p.shift);
+
+	reg |= (_nkmp.n - 1) << nkmp->n.shift;
+	reg |= (_nkmp.k - 1) << nkmp->k.shift;
+	reg |= (_nkmp.m - 1) << nkmp->m.shift;
+	reg |= _nkmp.p << nkmp->p.shift;
+
+	writel(reg, nkmp->common.base + nkmp->common.reg);
+
+	spin_unlock_irqrestore(nkmp->common.lock, flags);
+
+	ccu_helper_wait_for_lock(&nkmp->common, nkmp->lock);
+
+	return 0;
+}
+
+const struct clk_ops ccu_nkmp_ops = {
+	.disable	= ccu_nkmp_disable,
+	.enable		= ccu_nkmp_enable,
+	.is_enabled	= ccu_nkmp_is_enabled,
+
+	.recalc_rate	= ccu_nkmp_recalc_rate,
+	.round_rate	= ccu_nkmp_round_rate,
+	.set_rate	= ccu_nkmp_set_rate,
+};
diff --git a/drivers/clk/sunxi-ng/ccu_nkmp.h b/drivers/clk/sunxi-ng/ccu_nkmp.h
new file mode 100644
index 000000000000..44cfa203be07
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu_nkmp.h
@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2016 Maxime Ripard. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _CCU_NKMP_H_
+#define _CCU_NKMP_H_
+
+#include <linux/clk-provider.h>
+
+#include "ccu_common.h"
+#include "ccu_div.h"
+#include "ccu_mult.h"
+
+/*
+ * struct ccu_nkmp - Definition of an N-K-M-P clock
+ *
+ * Clocks based on the formula parent * N * K >> P / M
+ */
+struct ccu_nkmp {
+	u32			enable;
+	u32			lock;
+
+	struct _ccu_mult	n;
+	struct _ccu_mult	k;
+	struct _ccu_div		m;
+	struct _ccu_div		p;
+
+	struct ccu_common	common;
+};
+
+#define SUNXI_CCU_NKMP_WITH_GATE_LOCK(_struct, _name, _parent, _reg,	\
+				      _nshift, _nwidth,			\
+				      _kshift, _kwidth,			\
+				      _mshift, _mwidth,			\
+				      _pshift, _pwidth,			\
+				      _gate, _lock, _flags)		\
+	struct ccu_nkmp _struct = {					\
+		.enable		= _gate,				\
+		.lock		= _lock,				\
+		.n		= _SUNXI_CCU_MULT(_nshift, _nwidth),	\
+		.k		= _SUNXI_CCU_MULT(_kshift, _kwidth),	\
+		.m		= _SUNXI_CCU_DIV(_mshift, _mwidth),	\
+		.p		= _SUNXI_CCU_DIV(_pshift, _pwidth),	\
+		.common		= {					\
+			.reg		= _reg,				\
+			.features	= (CCU_FEATURE_GATE |		\
+					   CCU_FEATURE_PLL_LOCK),	\
+			.hw.init	= SUNXI_HW_INIT(_name,		\
+							_parent,	\
+							&ccu_nkmp_ops,	\
+							_flags),	\
+		},							\
+	}
+
+static inline struct ccu_nkmp *hw_to_ccu_nkmp(struct clk_hw *hw)
+{
+	struct ccu_common *common = hw_to_ccu_common(hw);
+
+	return container_of(common, struct ccu_nkmp, common);
+}
+
+extern const struct clk_ops ccu_nkmp_ops;
+
+#endif /* _CCU_NKMP_H_ */
-- 
2.8.3

  parent reply	other threads:[~2016-06-07 20:42 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-07 20:41 [PATCH v2 00/15] clk: sunxi: introduce "modern" clock support Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 01/15] dt-bindings: sunxi: Add CCU binding documentation Maxime Ripard
2016-06-08  1:37   ` Chen-Yu Tsai
2016-06-07 20:41 ` [PATCH v2 02/15] clk: sunxi-ng: Add common infrastructure Maxime Ripard
2016-06-09  7:39   ` Jean-Francois Moine
2016-06-07 20:41 ` [PATCH v2 03/15] clk: sunxi-ng: Add fractional lib Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 04/15] clk: sunxi-ng: Add fixed factor clock support Maxime Ripard
2016-06-21  1:15   ` Stephen Boyd
2016-06-21  9:24     ` Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 05/15] clk: sunxi-ng: Add gate " Maxime Ripard
2016-06-09  7:39   ` Jean-Francois Moine
2016-06-07 20:41 ` [PATCH v2 06/15] clk: sunxi-ng: Add mux " Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 07/15] clk: sunxi-ng: Add phase " Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 08/15] clk: sunxi-ng: Add divider Maxime Ripard
2016-06-09  7:40   ` Jean-Francois Moine
2016-06-11  8:27   ` Jean-Francois Moine
2016-06-07 20:41 ` [PATCH v2 09/15] clk: sunxi-ng: Add M-P factor clock support Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 10/15] clk: sunxi-ng: Add N-K-factor " Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 11/15] clk: sunxi-ng: Add N-M-factor " Maxime Ripard
2016-06-09  7:41   ` Jean-Francois Moine
2016-06-27 20:29     ` Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 12/15] clk: sunxi-ng: Add N-K-M Factor clock Maxime Ripard
2016-06-07 20:41 ` Maxime Ripard [this message]
2016-06-21  1:42   ` [PATCH v2 13/15] clk: sunxi-ng: Add N-K-M-P factor clock Stephen Boyd
2016-06-07 20:41 ` [PATCH v2 14/15] clk: sunxi-ng: Add H3 clocks Maxime Ripard
2016-06-09  7:42   ` Jean-Francois Moine
2016-06-25  0:28   ` Michael Turquette
2016-06-26 12:34     ` Maxime Ripard
     [not found]       ` <146707521689.89261.8354851392822550901@resonance>
2016-06-28  8:32         ` Maxime Ripard
2016-06-07 20:41 ` [PATCH v2 15/15] ARM: dt: sun8i: switch the H3 to the new CCU driver Maxime Ripard
2016-06-21  1:48 ` [PATCH v2 00/15] clk: sunxi: introduce "modern" clock support Stephen Boyd
2016-06-26 16:24   ` Maxime Ripard
2016-06-21  9:40 ` Jean-Francois Moine
2016-06-21 14:47   ` Maxime Ripard
2016-06-21 18:29     ` Jean-Francois Moine
2016-06-27 20:46       ` Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160607204154.31967-14-maxime.ripard@free-electrons.com \
    --to=maxime.ripard@free-electrons.com \
    --cc=andre.przywara@arm.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=moinejf@free.fr \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@codeaurora.org \
    --cc=vishnupatekar0510@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).