linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stefan Agner <stefan@agner.ch>
To: shawnguo@kernel.org, kernel@pengutronix.de
Cc: max.krummenacher@toradex.com, marcel.ziswiler@toradex.com,
	fabio.estevam@nxp.com, galak@codeaurora.org,
	ijc+devicetree@hellion.org.uk, mark.rutland@arm.com,
	pawel.moll@arm.com, robh+dt@kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Stefan Agner <stefan@agner.ch>
Subject: [PATCH 1/3] ARM: dts: imx7d: create i.MX 7Solo base device tree
Date: Tue,  7 Jun 2016 19:37:07 -0700	[thread overview]
Message-ID: <20160608023709.32090-2-stefan@agner.ch> (raw)
In-Reply-To: <20160608023709.32090-1-stefan@agner.ch>

The i.MX 7 series currently consists of two SoCs: i.MX 7Solo and
7Dual. The i.MX 7Solo implements a subset of features available on
i.MX 7Dual, hence create imx7s.dtsi as the base device tree. The
i.MX 7Dual's additional features over i.MX 7Solo are:
- Second Cortex-A7 core
- Second Gigabit Ethernet controller
- EPD (Electronc Paper Display, not yet part of the device tree)
- PCIe (not yet part of the device tree)
- Additional USB2.0 OTG controller

Signed-off-by: Stefan Agner <stefan@agner.ch>
---
 arch/arm/boot/dts/imx7d.dtsi | 923 +++----------------------------------------
 arch/arm/boot/dts/imx7s.dtsi | 880 +++++++++++++++++++++++++++++++++++++++++
 2 files changed, 928 insertions(+), 875 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx7s.dtsi

diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 6b3faa2..51c13cb 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -1,5 +1,6 @@
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
@@ -40,54 +41,10 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
-#include <dt-bindings/clock/imx7d-clock.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include "imx7d-pinfunc.h"
-#include "skeleton.dtsi"
+#include "imx7s.dtsi"
 
 / {
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		gpio6 = &gpio7;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		i2c2 = &i2c3;
-		i2c3 = &i2c4;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		serial6 = &uart7;
-	};
-
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "arm,cortex-a7";
-			device_type = "cpu";
-			reg = <0>;
-			operating-points = <
-				/* KHz	uV */
-				996000	1075000
-				792000	975000
-			>;
-			clock-latency = <61036>; /* two CLK32 periods */
-			clocks = <&clks IMX7D_CLK_ARM>;
-		};
-
 		cpu1: cpu@1 {
 			compatible = "arm,cortex-a7";
 			device_type = "cpu";
@@ -95,221 +52,6 @@
 		};
 	};
 
-	intc: interrupt-controller@31001000 {
-		compatible = "arm,cortex-a7-gic";
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		reg = <0x31001000 0x1000>,
-		      <0x31002000 0x1000>,
-		      <0x31004000 0x2000>,
-		      <0x31006000 0x2000>;
-	};
-
-	ckil: clock-cki {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "ckil";
-	};
-
-	osc: clock-osc {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc";
-	};
-
-	timer {
-		compatible = "arm,armv7-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
-		interrupt-parent = <&intc>;
-	};
-
-	etr@30086000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30086000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etr_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	tpiu@30087000 {
-		compatible = "arm,coresight-tpiu", "arm,primecell";
-		reg = <0x30087000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			tpiu_in_port: endpoint {
-				slave-mode;
-				remote-endpoint = <&replicator_out_port1>;
-			};
-		};
-	};
-
-	replicator {
-		/*
-		 * non-configurable replicators don't show up on the
-		 * AMBA bus.  As such no need to add "arm,primecell"
-		 */
-		compatible = "arm,coresight-replicator";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* replicator output ports */
-			port@0 {
-				reg = <0>;
-				replicator_out_port0: endpoint {
-					remote-endpoint = <&tpiu_in_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				replicator_out_port1: endpoint {
-					remote-endpoint = <&etr_in_port>;
-				};
-			};
-
-			/* replicator input port */
-			port@2 {
-				reg = <0>;
-				replicator_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etf_out_port>;
-				};
-			};
-		};
-	};
-
-	etf@30084000 {
-		compatible = "arm,coresight-tmc", "arm,primecell";
-		reg = <0x30084000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				etf_in_port: endpoint {
-					slave-mode;
-					remote-endpoint = <&hugo_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <0>;
-				etf_out_port: endpoint {
-					remote-endpoint = <&replicator_in_port0>;
-				};
-			};
-		};
-	};
-
-	funnel@30083000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30083000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				hugo_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&ca_funnel_out_port0>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				hugo_funnel_in_port1: endpoint {
-					slave-mode; /* M4 input */
-				};
-			};
-
-			port@2 {
-				reg = <0>;
-				hugo_funnel_out_port0: endpoint {
-					remote-endpoint = <&etf_in_port>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	funnel@30041000 {
-		compatible = "arm,coresight-funnel", "arm,primecell";
-		reg = <0x30041000 0x1000>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			/* funnel input ports */
-			port@0 {
-				reg = <0>;
-				ca_funnel_in_port0: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm0_out_port>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				ca_funnel_in_port1: endpoint {
-					slave-mode;
-					remote-endpoint = <&etm1_out_port>;
-				};
-			};
-
-			/* funnel output port */
-			port@2 {
-				reg = <0>;
-				ca_funnel_out_port0: endpoint {
-					remote-endpoint = <&hugo_funnel_in_port0>;
-				};
-			};
-
-			/* the other input ports are not connect to anything */
-		};
-	};
-
-	etm@3007c000 {
-		compatible = "arm,coresight-etm3x", "arm,primecell";
-		reg = <0x3007c000 0x1000>;
-		cpu = <&cpu0>;
-		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
-		clock-names = "apb_pclk";
-
-		port {
-			etm0_out_port: endpoint {
-				remote-endpoint = <&ca_funnel_in_port0>;
-			};
-		};
-	};
-
 	etm@3007d000 {
 		compatible = "arm,coresight-etm3x", "arm,primecell";
 		reg = <0x3007d000 0x1000>;
@@ -330,626 +72,57 @@
 			};
 		};
 	};
+};
 
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&intc>;
-		ranges;
-
-		aips1: aips-bus@30000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30000000 0x400000>;
-			ranges;
-
-			gpio1: gpio@30200000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30200000 0x10000>;
-				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
-					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio2: gpio@30210000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30210000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio3: gpio@30220000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30220000 0x10000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio4: gpio@30230000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30230000 0x10000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio5: gpio@30240000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30240000 0x10000>;
-				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio6: gpio@30250000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30250000 0x10000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			gpio7: gpio@30260000 {
-				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
-				reg = <0x30260000 0x10000>;
-				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-			};
-
-			wdog1: wdog@30280000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30280000 0x10000>;
-				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
-			};
-
-			wdog2: wdog@30290000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x30290000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog3: wdog@302a0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302a0000 0x10000>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			wdog4: wdog@302b0000 {
-				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
-				reg = <0x302b0000 0x10000>;
-				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
-				compatible = "fsl,imx7d-iomuxc-lpsr";
-				reg = <0x302c0000 0x10000>;
-				fsl,input-sel = <&iomuxc>;
-			};
-
-			gpt1: gpt@302d0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302d0000 0x10000>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: gpt@302e0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302e0000 0x10000>;
-				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt3: gpt@302f0000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x302f0000 0x10000>;
-				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: gpt@30300000 {
-				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
-				reg = <0x30300000 0x10000>;
-				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					 <&clks IMX7D_GPT4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@30330000 {
-				compatible = "fsl,imx7d-iomuxc";
-				reg = <0x30330000 0x10000>;
-			};
-
-			gpr: iomuxc-gpr@30340000 {
-				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
-				reg = <0x30340000 0x10000>;
-			};
-
-			ocotp: ocotp-ctrl@30350000 {
-				compatible = "syscon";
-				reg = <0x30350000 0x10000>;
-				clocks = <&clks IMX7D_CLK_DUMMY>;
-				status = "disabled";
-			};
-
-			anatop: anatop@30360000 {
-				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
-					"syscon", "simple-bus";
-				reg = <0x30360000 0x10000>;
-				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-
-				reg_1p0d: regulator-vdd1p0d@210 {
-					compatible = "fsl,anatop-regulator";
-					regulator-name = "vdd1p0d";
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <1200000>;
-					anatop-reg-offset = <0x210>;
-					anatop-vol-bit-shift = <8>;
-					anatop-vol-bit-width = <5>;
-					anatop-min-bit-val = <8>;
-					anatop-min-voltage = <800000>;
-					anatop-max-voltage = <1200000>;
-					anatop-enable-bit = <31>;
-				};
-			};
-
-			snvs: snvs@30370000 {
-				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
-				reg = <0x30370000 0x10000>;
-
-				snvs_rtc: snvs-rtc-lp {
-					compatible = "fsl,sec-v4.0-mon-rtc-lp";
-					regmap = <&snvs>;
-					offset = <0x34>;
-					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				snvs_poweroff: snvs-poweroff {
-					compatible = "syscon-poweroff";
-					regmap = <&snvs>;
-					offset = <0x38>;
-					mask = <0x60>;
-				};
-
-				snvs_pwrkey: snvs-powerkey {
-					compatible = "fsl,sec-v4.0-pwrkey";
-					regmap = <&snvs>;
-					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-					linux,keycode = <KEY_POWER>;
-					wakeup-source;
-				};
-			};
-
-			clks: ccm@30380000 {
-				compatible = "fsl,imx7d-ccm";
-				reg = <0x30380000 0x10000>;
-				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				#clock-cells = <1>;
-				clocks = <&ckil>, <&osc>;
-				clock-names = "ckil", "osc";
-			};
-
-			src: src@30390000 {
-				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
-				reg = <0x30390000 0x10000>;
-				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-				#reset-cells = <1>;
-			};
-		};
-
-		aips2: aips-bus@30400000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30400000 0x400000>;
-			ranges;
-
-			adc1: adc@30610000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30610000 0x10000>;
-				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			adc2: adc@30620000 {
-				compatible = "fsl,imx7d-adc";
-				reg = <0x30620000 0x10000>;
-				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
-				clock-names = "adc";
-				status = "disabled";
-			};
-
-			pwm1: pwm@30660000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30660000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
-					 <&clks IMX7D_PWM1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm2: pwm@30670000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30670000 0x10000>;
-				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
-					 <&clks IMX7D_PWM2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm3: pwm@30680000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30680000 0x10000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
-					 <&clks IMX7D_PWM3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			pwm4: pwm@30690000 {
-				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
-				reg = <0x30690000 0x10000>;
-				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
-					 <&clks IMX7D_PWM4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
-				status = "disabled";
-			};
-
-			lcdif: lcdif@30730000 {
-				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
-				reg = <0x30730000 0x10000>;
-				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>;
-				clock-names = "pix", "axi", "disp_axi";
-				status = "disabled";
-			};
-		};
-
-		aips3: aips-bus@30800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x30800000 0x400000>;
-			ranges;
-
-			uart1: serial@30860000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30860000 0x10000>;
-				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
-					<&clks IMX7D_UART1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@30890000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30890000 0x10000>;
-				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
-					<&clks IMX7D_UART2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@30880000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30880000 0x10000>;
-				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
-					<&clks IMX7D_UART3_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan1: can@30a00000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a00000 0x10000>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN1_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			flexcan2: can@30a10000 {
-				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
-				reg = <0x30a10000 0x10000>;
-				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CAN2_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c1: i2c@30a20000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a20000 0x10000>;
-				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c2: i2c@30a30000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a30000 0x10000>;
-				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c3: i2c@30a40000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a40000 0x10000>;
-				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			i2c4: i2c@30a50000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
-				reg = <0x30a50000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
-				status = "disabled";
-			};
-
-			uart4: serial@30a60000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a60000 0x10000>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
-					<&clks IMX7D_UART4_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart5: serial@30a70000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a70000 0x10000>;
-				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
-					<&clks IMX7D_UART5_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@30a80000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a80000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
-					<&clks IMX7D_UART6_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart7: serial@30a90000 {
-				compatible = "fsl,imx7d-uart",
-					     "fsl,imx6q-uart";
-				reg = <0x30a90000 0x10000>;
-				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
-					<&clks IMX7D_UART7_ROOT_CLK>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			usbotg1: usb@30b10000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b10000 0x200>;
-				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop1>;
-				fsl,usbmisc = <&usbmisc1 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbotg2: usb@30b20000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b20000 0x200>;
-				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbh: usb@30b30000 {
-				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
-				reg = <0x30b30000 0x200>;
-				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_USB_CTRL_CLK>;
-				fsl,usbphy = <&usbphynop3>;
-				fsl,usbmisc = <&usbmisc3 0>;
-				phy_type = "hsic";
-				dr_mode = "host";
-				phy-clkgate-delay-us = <400>;
-				status = "disabled";
-			};
-
-			usbmisc1: usbmisc@30b10200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b10200 0x200>;
-			};
-
-			usbmisc2: usbmisc@30b20200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b20200 0x200>;
-			};
-
-			usbmisc3: usbmisc@30b30200 {
-				#index-cells = <1>;
-				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
-				reg = <0x30b30200 0x200>;
-			};
-
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY1_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop2: usbphynop2 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_PHY2_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usbphynop3: usbphynop3 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
-				clock-names = "main_clk";
-			};
-
-			usdhc1: usdhc@30b40000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b40000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC1_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+&aips3 {
+	usbotg2: usb@30b20000 {
+		compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+		reg = <0x30b20000 0x200>;
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_USB_CTRL_CLK>;
+		fsl,usbphy = <&usbphynop2>;
+		fsl,usbmisc = <&usbmisc2 0>;
+		phy-clkgate-delay-us = <400>;
+		status = "disabled";
+	};
 
-			usdhc2: usdhc@30b50000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b50000 0x10000>;
-				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC2_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	usbmisc2: usbmisc@30b20200 {
+		#index-cells = <1>;
+		compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+		reg = <0x30b20200 0x200>;
+	};
 
-			usdhc3: usdhc@30b60000 {
-				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
-				reg = <0x30b60000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_CLK_DUMMY>,
-					<&clks IMX7D_USDHC3_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "per";
-				bus-width = <4>;
-				status = "disabled";
-			};
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clks IMX7D_USB_PHY2_CLK>;
+		clock-names = "main_clk";
+	};
 
-			fec1: ethernet@30be0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30be0000 0x10000>;
-				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
+	fec2: ethernet@30bf0000 {
+		compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+		reg = <0x30bf0000 0x10000>;
+		interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+			<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
+			<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+			<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+		clock-names = "ipg", "ahb", "ptp",
+			"enet_clk_ref", "enet_out";
+		fsl,num-tx-queues=<3>;
+		fsl,num-rx-queues=<3>;
+		status = "disabled";
+	};
+};
 
-			fec2: ethernet@30bf0000 {
-				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
-				reg = <0x30bf0000 0x10000>;
-				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
-					<&clks IMX7D_ENET2_TIME_ROOT_CLK>,
-					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
-					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
-				clock-names = "ipg", "ahb", "ptp",
-					"enet_clk_ref", "enet_out";
-				fsl,num-tx-queues=<3>;
-				fsl,num-rx-queues=<3>;
-				status = "disabled";
-			};
+&ca_funnel_ports {
+	port@1 {
+		reg = <1>;
+		ca_funnel_in_port1: endpoint {
+			slave-mode;
+			remote-endpoint = <&etm1_out_port>;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
new file mode 100644
index 0000000..a5fd2d7
--- /dev/null
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -0,0 +1,880 @@
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ * Copyright 2016 Toradex AG
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include <dt-bindings/clock/imx7d-clock.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "imx7d-pinfunc.h"
+#include "skeleton.dtsi"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
+		i2c2 = &i2c3;
+		i2c3 = &i2c4;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		serial5 = &uart6;
+		serial6 = &uart7;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a7";
+			device_type = "cpu";
+			reg = <0>;
+			operating-points = <
+				/* KHz	uV */
+				996000	1075000
+				792000	975000
+			>;
+			clock-latency = <61036>; /* two CLK32 periods */
+			clocks = <&clks IMX7D_CLK_ARM>;
+		};
+	};
+
+	intc: interrupt-controller@31001000 {
+		compatible = "arm,cortex-a7-gic";
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x31001000 0x1000>,
+		      <0x31002000 0x1000>,
+		      <0x31004000 0x2000>,
+		      <0x31006000 0x2000>;
+	};
+
+	ckil: clock-cki {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "ckil";
+	};
+
+	osc: clock-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc";
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupt-parent = <&intc>;
+	};
+
+	etr@30086000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30086000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etr_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	tpiu@30087000 {
+		compatible = "arm,coresight-tpiu", "arm,primecell";
+		reg = <0x30087000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			tpiu_in_port: endpoint {
+				slave-mode;
+				remote-endpoint = <&replicator_out_port1>;
+			};
+		};
+	};
+
+	replicator {
+		/*
+		 * non-configurable replicators don't show up on the
+		 * AMBA bus.  As such no need to add "arm,primecell"
+		 */
+		compatible = "arm,coresight-replicator";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* replicator output ports */
+			port@0 {
+				reg = <0>;
+				replicator_out_port0: endpoint {
+					remote-endpoint = <&tpiu_in_port>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				replicator_out_port1: endpoint {
+					remote-endpoint = <&etr_in_port>;
+				};
+			};
+
+			/* replicator input port */
+			port@2 {
+				reg = <0>;
+				replicator_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etf_out_port>;
+				};
+			};
+		};
+	};
+
+	etf@30084000 {
+		compatible = "arm,coresight-tmc", "arm,primecell";
+		reg = <0x30084000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				etf_in_port: endpoint {
+					slave-mode;
+					remote-endpoint = <&hugo_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <0>;
+				etf_out_port: endpoint {
+					remote-endpoint = <&replicator_in_port0>;
+				};
+			};
+		};
+	};
+
+	funnel@30083000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30083000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				hugo_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&ca_funnel_out_port0>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				hugo_funnel_in_port1: endpoint {
+					slave-mode; /* M4 input */
+				};
+			};
+
+			port@2 {
+				reg = <0>;
+				hugo_funnel_out_port0: endpoint {
+					remote-endpoint = <&etf_in_port>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	funnel@30041000 {
+		compatible = "arm,coresight-funnel", "arm,primecell";
+		reg = <0x30041000 0x1000>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		ca_funnel_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			/* funnel input ports */
+			port@0 {
+				reg = <0>;
+				ca_funnel_in_port0: endpoint {
+					slave-mode;
+					remote-endpoint = <&etm0_out_port>;
+				};
+			};
+
+			/* funnel output port */
+			port@2 {
+				reg = <0>;
+				ca_funnel_out_port0: endpoint {
+					remote-endpoint = <&hugo_funnel_in_port0>;
+				};
+			};
+
+			/* the other input ports are not connect to anything */
+		};
+	};
+
+	etm@3007c000 {
+		compatible = "arm,coresight-etm3x", "arm,primecell";
+		reg = <0x3007c000 0x1000>;
+		cpu = <&cpu0>;
+		clocks = <&clks IMX7D_MAIN_AXI_ROOT_CLK>;
+		clock-names = "apb_pclk";
+
+		port {
+			etm0_out_port: endpoint {
+				remote-endpoint = <&ca_funnel_in_port0>;
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		aips1: aips-bus@30000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30000000 0x400000>;
+			ranges;
+
+			gpio1: gpio@30200000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30200000 0x10000>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, /* GPIO1_INT15_0 */
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; /* GPIO1_INT31_16 */
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@30210000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30210000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@30220000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30220000 0x10000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@30230000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30230000 0x10000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio5: gpio@30240000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30240000 0x10000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@30250000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30250000 0x10000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio7: gpio@30260000 {
+				compatible = "fsl,imx7d-gpio", "fsl,imx35-gpio";
+				reg = <0x30260000 0x10000>;
+				interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@30280000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30280000 0x10000>;
+				interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG1_ROOT_CLK>;
+			};
+
+			wdog2: wdog@30290000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x30290000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog3: wdog@302a0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302a0000 0x10000>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			wdog4: wdog@302b0000 {
+				compatible = "fsl,imx7d-wdt", "fsl,imx21-wdt";
+				reg = <0x302b0000 0x10000>;
+				interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_WDOG4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			iomuxc_lpsr: iomuxc-lpsr@302c0000 {
+				compatible = "fsl,imx7d-iomuxc-lpsr";
+				reg = <0x302c0000 0x10000>;
+				fsl,input-sel = <&iomuxc>;
+			};
+
+			gpt1: gpt@302d0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302d0000 0x10000>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+			};
+
+			gpt2: gpt@302e0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302e0000 0x10000>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt3: gpt@302f0000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x302f0000 0x10000>;
+				interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			gpt4: gpt@30300000 {
+				compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt";
+				reg = <0x30300000 0x10000>;
+				interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					 <&clks IMX7D_GPT4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			iomuxc: iomuxc@30330000 {
+				compatible = "fsl,imx7d-iomuxc";
+				reg = <0x30330000 0x10000>;
+			};
+
+			gpr: iomuxc-gpr@30340000 {
+				compatible = "fsl,imx7d-iomuxc-gpr", "syscon";
+				reg = <0x30340000 0x10000>;
+			};
+
+			ocotp: ocotp-ctrl@30350000 {
+				compatible = "syscon";
+				reg = <0x30350000 0x10000>;
+				clocks = <&clks IMX7D_CLK_DUMMY>;
+				status = "disabled";
+			};
+
+			anatop: anatop@30360000 {
+				compatible = "fsl,imx7d-anatop", "fsl,imx6q-anatop",
+					"syscon", "simple-bus";
+				reg = <0x30360000 0x10000>;
+				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+
+				reg_1p0d: regulator-vdd1p0d@210 {
+					compatible = "fsl,anatop-regulator";
+					regulator-name = "vdd1p0d";
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1200000>;
+					anatop-reg-offset = <0x210>;
+					anatop-vol-bit-shift = <8>;
+					anatop-vol-bit-width = <5>;
+					anatop-min-bit-val = <8>;
+					anatop-min-voltage = <800000>;
+					anatop-max-voltage = <1200000>;
+					anatop-enable-bit = <31>;
+				};
+			};
+
+			snvs: snvs@30370000 {
+				compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+				reg = <0x30370000 0x10000>;
+
+				snvs_rtc: snvs-rtc-lp {
+					compatible = "fsl,sec-v4.0-mon-rtc-lp";
+					regmap = <&snvs>;
+					offset = <0x34>;
+					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				snvs_poweroff: snvs-poweroff {
+					compatible = "syscon-poweroff";
+					regmap = <&snvs>;
+					offset = <0x38>;
+					mask = <0x60>;
+				};
+
+				snvs_pwrkey: snvs-powerkey {
+					compatible = "fsl,sec-v4.0-pwrkey";
+					regmap = <&snvs>;
+					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					linux,keycode = <KEY_POWER>;
+					wakeup-source;
+				};
+			};
+
+			clks: ccm@30380000 {
+				compatible = "fsl,imx7d-ccm";
+				reg = <0x30380000 0x10000>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				#clock-cells = <1>;
+				clocks = <&ckil>, <&osc>;
+				clock-names = "ckil", "osc";
+			};
+
+			src: src@30390000 {
+				compatible = "fsl,imx7d-src", "fsl,imx51-src", "syscon";
+				reg = <0x30390000 0x10000>;
+				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+				#reset-cells = <1>;
+			};
+		};
+
+		aips2: aips-bus@30400000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30400000 0x400000>;
+			ranges;
+
+			adc1: adc@30610000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30610000 0x10000>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			adc2: adc@30620000 {
+				compatible = "fsl,imx7d-adc";
+				reg = <0x30620000 0x10000>;
+				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+				clock-names = "adc";
+				status = "disabled";
+			};
+
+			pwm1: pwm@30660000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30660000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
+					 <&clks IMX7D_PWM1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm2: pwm@30670000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30670000 0x10000>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
+					 <&clks IMX7D_PWM2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm3: pwm@30680000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30680000 0x10000>;
+				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
+					 <&clks IMX7D_PWM3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			pwm4: pwm@30690000 {
+				compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm";
+				reg = <0x30690000 0x10000>;
+				interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
+					 <&clks IMX7D_PWM4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				#pwm-cells = <2>;
+				status = "disabled";
+			};
+
+			lcdif: lcdif@30730000 {
+				compatible = "fsl,imx7d-lcdif", "fsl,imx28-lcdif";
+				reg = <0x30730000 0x10000>;
+				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_LCDIF_PIXEL_ROOT_CLK>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>;
+				clock-names = "pix", "axi", "disp_axi";
+				status = "disabled";
+			};
+		};
+
+		aips3: aips-bus@30800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x30800000 0x400000>;
+			ranges;
+
+			uart1: serial@30860000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30860000 0x10000>;
+				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART1_ROOT_CLK>,
+					<&clks IMX7D_UART1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@30890000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30890000 0x10000>;
+				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART2_ROOT_CLK>,
+					<&clks IMX7D_UART2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart3: serial@30880000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30880000 0x10000>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART3_ROOT_CLK>,
+					<&clks IMX7D_UART3_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan1: can@30a00000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a00000 0x10000>;
+				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN1_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			flexcan2: can@30a10000 {
+				compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+				reg = <0x30a10000 0x10000>;
+				interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CAN2_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c1: i2c@30a20000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a20000 0x10000>;
+				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C1_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c2: i2c@30a30000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a30000 0x10000>;
+				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C2_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c3: i2c@30a40000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a40000 0x10000>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C3_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			i2c4: i2c@30a50000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx7d-i2c", "fsl,imx21-i2c";
+				reg = <0x30a50000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_I2C4_ROOT_CLK>;
+				status = "disabled";
+			};
+
+			uart4: serial@30a60000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a60000 0x10000>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART4_ROOT_CLK>,
+					<&clks IMX7D_UART4_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart5: serial@30a70000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a70000 0x10000>;
+				interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART5_ROOT_CLK>,
+					<&clks IMX7D_UART5_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart6: serial@30a80000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a80000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART6_ROOT_CLK>,
+					<&clks IMX7D_UART6_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart7: serial@30a90000 {
+				compatible = "fsl,imx7d-uart",
+					     "fsl,imx6q-uart";
+				reg = <0x30a90000 0x10000>;
+				interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_UART7_ROOT_CLK>,
+					<&clks IMX7D_UART7_ROOT_CLK>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			usbotg1: usb@30b10000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b10000 0x200>;
+				interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop1>;
+				fsl,usbmisc = <&usbmisc1 0>;
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbh: usb@30b30000 {
+				compatible = "fsl,imx7d-usb", "fsl,imx27-usb";
+				reg = <0x30b30000 0x200>;
+				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_USB_CTRL_CLK>;
+				fsl,usbphy = <&usbphynop3>;
+				fsl,usbmisc = <&usbmisc3 0>;
+				phy_type = "hsic";
+				dr_mode = "host";
+				phy-clkgate-delay-us = <400>;
+				status = "disabled";
+			};
+
+			usbmisc1: usbmisc@30b10200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b10200 0x200>;
+			};
+
+			usbmisc3: usbmisc@30b30200 {
+				#index-cells = <1>;
+				compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc";
+				reg = <0x30b30200 0x200>;
+			};
+
+			usbphynop1: usbphynop1 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_PHY1_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usbphynop3: usbphynop3 {
+				compatible = "usb-nop-xceiv";
+				clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>;
+				clock-names = "main_clk";
+			};
+
+			usdhc1: usdhc@30b40000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b40000 0x10000>;
+				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC1_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc2: usdhc@30b50000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b50000 0x10000>;
+				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC2_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			usdhc3: usdhc@30b60000 {
+				compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc";
+				reg = <0x30b60000 0x10000>;
+				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_CLK_DUMMY>,
+					<&clks IMX7D_USDHC3_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "per";
+				bus-width = <4>;
+				status = "disabled";
+			};
+
+			fec1: ethernet@30be0000 {
+				compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec";
+				reg = <0x30be0000 0x10000>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET_AXI_ROOT_CLK>,
+					<&clks IMX7D_ENET1_TIME_ROOT_CLK>,
+					<&clks IMX7D_PLL_ENET_MAIN_125M_CLK>,
+					<&clks IMX7D_ENET_PHY_REF_ROOT_CLK>;
+				clock-names = "ipg", "ahb", "ptp",
+					"enet_clk_ref", "enet_out";
+				fsl,num-tx-queues=<3>;
+				fsl,num-rx-queues=<3>;
+				status = "disabled";
+			};
+		};
+	};
+};
-- 
2.8.3

  reply	other threads:[~2016-06-08  2:37 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08  2:37 [PATCH 0/3] ARM: dts: imx7d: add i.MX 7Solo and Colibri iMX7S/D dts Stefan Agner
2016-06-08  2:37 ` Stefan Agner [this message]
2016-06-12  1:35   ` [PATCH 1/3] ARM: dts: imx7d: create i.MX 7Solo base device tree Shawn Guo
2016-06-19  4:20     ` Stefan Agner
2016-06-21  3:20       ` Shawn Guo
2016-06-08  2:37 ` [PATCH 2/3] ARM: dts: imx7d: move input header into " Stefan Agner
2016-06-08  7:29   ` Igor Grinberg
2016-06-08  2:37 ` [PATCH 3/3] ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support Stefan Agner
2016-06-12  2:31   ` Shawn Guo
2016-06-16  5:37     ` Stefan Agner
2016-06-16 10:44       ` Marcel Ziswiler

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160608023709.32090-2-stefan@agner.ch \
    --to=stefan@agner.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=max.krummenacher@toradex.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).