From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755230AbcFHGsr (ORCPT ); Wed, 8 Jun 2016 02:48:47 -0400 Received: from comal.ext.ti.com ([198.47.26.152]:53310 "EHLO comal.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754899AbcFHGsp (ORCPT ); Wed, 8 Jun 2016 02:48:45 -0400 From: Vignesh R To: Mark Brown CC: , , , Vignesh R Subject: [PATCH v4 1/2] spi: Add DMA support for spi_flash_read() Date: Wed, 8 Jun 2016 12:18:31 +0530 Message-ID: <20160608064832.18496-2-vigneshr@ti.com> X-Mailer: git-send-email 2.8.3 In-Reply-To: <20160608064832.18496-1-vigneshr@ti.com> References: <20160608064832.18496-1-vigneshr@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Few SPI devices provide accelerated read interfaces to read from SPI-NOR flash devices. These hardwares also support DMA to transfer data from flash to memory either via mem-to-mem DMA or dedicated slave DMA channels. Hence, add support for DMA in order to improve throughput and reduce CPU load. Use spi_map_buf() to get sg table for the buffer and pass it to SPI driver. Signed-off-by: Vignesh R --- v4: Fix build errors reported by kbuild test bot. v3: No changes. v2: use cur_msg_mapped flag to indicate success/failure of spi_map_buf() drivers/spi/spi.c | 28 ++++++++++++++++++++++++++++ include/linux/spi/spi.h | 4 ++++ 2 files changed, 32 insertions(+) diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 77e6e45951f4..c9a8d544e467 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -849,6 +849,20 @@ static int __spi_unmap_msg(struct spi_master *master, struct spi_message *msg) return 0; } #else /* !CONFIG_HAS_DMA */ +static inline int spi_map_buf(struct spi_master *master, + struct device *dev, struct sg_table *sgt, + void *buf, size_t len, + enum dma_data_direction dir) +{ + return -EINVAL; +} + +static inline void spi_unmap_buf(struct spi_master *master, + struct device *dev, struct sg_table *sgt, + enum dma_data_direction dir) +{ +} + static inline int __spi_map_msg(struct spi_master *master, struct spi_message *msg) { @@ -2725,6 +2739,7 @@ int spi_flash_read(struct spi_device *spi, { struct spi_master *master = spi->master; + struct device *rx_dev = NULL; int ret; if ((msg->opcode_nbits == SPI_NBITS_DUAL || @@ -2750,9 +2765,22 @@ int spi_flash_read(struct spi_device *spi, return ret; } } + mutex_lock(&master->bus_lock_mutex); + if (master->dma_rx) { + rx_dev = master->dma_rx->device->dev; + ret = spi_map_buf(master, rx_dev, &msg->rx_sg, + msg->buf, msg->len, + DMA_FROM_DEVICE); + if (!ret) + msg->cur_msg_mapped = true; + } ret = master->spi_flash_read(spi, msg); + if (msg->cur_msg_mapped) + spi_unmap_buf(master, rx_dev, &msg->rx_sg, + DMA_FROM_DEVICE); mutex_unlock(&master->bus_lock_mutex); + if (master->auto_runtime_pm) pm_runtime_put(master->dev.parent); diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 1f03483f61e5..7b53af4ba5f8 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -1143,6 +1143,8 @@ static inline ssize_t spi_w8r16be(struct spi_device *spi, u8 cmd) * @opcode_nbits: number of lines to send opcode * @addr_nbits: number of lines to send address * @data_nbits: number of lines for data + * @rx_sg: Scatterlist for receive data read from flash + * @cur_msg_mapped: message has been mapped for DMA */ struct spi_flash_read_message { void *buf; @@ -1155,6 +1157,8 @@ struct spi_flash_read_message { u8 opcode_nbits; u8 addr_nbits; u8 data_nbits; + struct sg_table rx_sg; + bool cur_msg_mapped; }; /* SPI core interface for flash read support */ -- 2.8.3