linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: kernel@stlinux.com, maxime.coquelin@st.com,
	patrice.chotard@st.com, thierry.reding@gmail.com,
	robh+dt@kernel.org, linux-pwm@vger.kernel.org,
	devicetree@vger.kernel.org, Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v3 11/20] pwm: sti: Reorganise register names in preparation for new functionality
Date: Wed,  8 Jun 2016 10:21:26 +0100	[thread overview]
Message-ID: <20160608092135.21184-12-lee.jones@linaro.org> (raw)
In-Reply-To: <20160608092135.21184-1-lee.jones@linaro.org>

Exciting functionality is on the way to this device.  But
before we can add it, we need to do some basic housekeeping
so the additions can be added cleanly.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 drivers/pwm/pwm-sti.c | 76 +++++++++++++++++++++++++++------------------------
 1 file changed, 41 insertions(+), 35 deletions(-)

diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 3dae127..5fbee61 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c
@@ -21,18 +21,22 @@
 #include <linux/slab.h>
 #include <linux/time.h>
 
-#define STI_DS_REG(ch)	(4 * (ch))	/* Device's Duty Cycle register */
-#define STI_PWMCR	0x50		/* Control/Config register */
-#define STI_INTEN	0x54		/* Interrupt Enable/Disable register */
+#define PWM_OUT_VAL(x)	(0x00 + (4 * (x))) /* Device's Duty Cycle register */
+
+#define STI_PWM_CTRL		0x50	/* Control/Config register */
+#define STI_INT_EN		0x54	/* Interrupt Enable/Disable register */
 #define PWM_PRESCALE_LOW_MASK		0x0f
 #define PWM_PRESCALE_HIGH_MASK		0xf0
 
 /* Regfield IDs */
 enum {
+	/* Bits in PWM_CTRL*/
 	PWMCLK_PRESCALE_LOW,
 	PWMCLK_PRESCALE_HIGH,
-	PWM_EN,
-	PWM_INT_EN,
+
+	PWM_OUT_EN,
+
+	PWM_CPT_INT_EN,
 
 	/* Keep last */
 	MAX_REGFIELDS
@@ -47,14 +51,14 @@ struct sti_pwm_compat_data {
 
 struct sti_pwm_chip {
 	struct device *dev;
-	struct clk *clk;
 	unsigned long clk_rate;
+	struct clk *pwm_clk;
 	struct regmap *regmap;
 	struct sti_pwm_compat_data *cdata;
 	struct regmap_field *prescale_low;
 	struct regmap_field *prescale_high;
-	struct regmap_field *pwm_en;
-	struct regmap_field *pwm_int_en;
+	struct regmap_field *pwm_out_en;
+	struct regmap_field *pwm_cpt_int_en;
 	struct pwm_chip chip;
 	struct pwm_device *cur;
 	unsigned long configured;
@@ -64,10 +68,10 @@ struct sti_pwm_chip {
 };
 
 static const struct reg_field sti_pwm_regfields[MAX_REGFIELDS] = {
-	[PWMCLK_PRESCALE_LOW]	= REG_FIELD(STI_PWMCR, 0, 3),
-	[PWMCLK_PRESCALE_HIGH]	= REG_FIELD(STI_PWMCR, 11, 14),
-	[PWM_EN]		= REG_FIELD(STI_PWMCR, 9, 9),
-	[PWM_INT_EN]		= REG_FIELD(STI_INTEN, 0, 0),
+	[PWMCLK_PRESCALE_LOW]	= REG_FIELD(STI_PWM_CTRL, 0, 3),
+	[PWMCLK_PRESCALE_HIGH]	= REG_FIELD(STI_PWM_CTRL, 11, 14),
+	[PWM_OUT_EN]		= REG_FIELD(STI_PWM_CTRL, 9, 9),
+	[PWM_CPT_INT_EN]	= REG_FIELD(STI_INT_EN, 1, 4),
 };
 
 static inline struct sti_pwm_chip *to_sti_pwmchip(struct pwm_chip *chip)
@@ -144,7 +148,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	    ((ncfg == 1) && (pwm->hwpwm != cur->hwpwm) && period_same) ||
 	    ((ncfg > 1) && period_same)) {
 		/* Enable clock before writing to PWM registers. */
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
 		if (ret)
 			return ret;
 
@@ -174,11 +178,12 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		 */
 		pwmvalx = cdata->max_pwm_cnt * duty_ns / period_ns;
 
-		ret = regmap_write(pc->regmap, STI_DS_REG(pwm->hwpwm), pwmvalx);
+		ret = regmap_write(pc->regmap,
+				   PWM_OUT_VAL(pwm->hwpwm), pwmvalx);
 		if (ret)
 			goto clk_dis;
 
-		ret = regmap_field_write(pc->pwm_int_en, 0);
+		ret = regmap_field_write(pc->pwm_cpt_int_en, 0);
 
 		set_bit(pwm->hwpwm, &pc->configured);
 		pc->cur = pwm;
@@ -190,7 +195,7 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	}
 
 clk_dis:
-	clk_disable(pc->clk);
+	clk_disable(pc->pwm_clk);
 	return ret;
 }
 
@@ -206,11 +211,11 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
 	 */
 	mutex_lock(&pc->sti_pwm_lock);
 	if (!pc->en_count) {
-		ret = clk_enable(pc->clk);
+		ret = clk_enable(pc->pwm_clk);
 		if (ret)
 			goto out;
 
-		ret = regmap_field_write(pc->pwm_en, 1);
+		ret = regmap_field_write(pc->pwm_out_en, 1);
 		if (ret) {
 			dev_err(dev, "failed to enable PWM device:%d\n",
 				pwm->hwpwm);
@@ -232,9 +237,9 @@ static void sti_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 		mutex_unlock(&pc->sti_pwm_lock);
 		return;
 	}
-	regmap_field_write(pc->pwm_en, 0);
+	regmap_field_write(pc->pwm_out_en, 0);
 
-	clk_disable(pc->clk);
+	clk_disable(pc->pwm_clk);
 	mutex_unlock(&pc->sti_pwm_lock);
 }
 
@@ -277,15 +282,16 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc)
 	if (IS_ERR(pc->prescale_high))
 		return PTR_ERR(pc->prescale_high);
 
-	pc->pwm_en = devm_regmap_field_alloc(dev, pc->regmap,
-					     reg_fields[PWM_EN]);
-	if (IS_ERR(pc->pwm_en))
-		return PTR_ERR(pc->pwm_en);
 
-	pc->pwm_int_en = devm_regmap_field_alloc(dev, pc->regmap,
-						 reg_fields[PWM_INT_EN]);
-	if (IS_ERR(pc->pwm_int_en))
-		return PTR_ERR(pc->pwm_int_en);
+	pc->pwm_out_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_OUT_EN]);
+	if (IS_ERR(pc->pwm_out_en))
+		return PTR_ERR(pc->pwm_out_en);
+
+	pc->pwm_cpt_int_en = devm_regmap_field_alloc(dev, pc->regmap,
+						 reg_fields[PWM_CPT_INT_EN]);
+	if (IS_ERR(pc->pwm_cpt_int_en))
+		return PTR_ERR(pc->pwm_cpt_int_en);
 
 	return 0;
 }
@@ -341,19 +347,19 @@ static int sti_pwm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	pc->clk = of_clk_get_by_name(dev->of_node, "pwm");
-	if (IS_ERR(pc->clk)) {
+	pc->pwm_clk = of_clk_get_by_name(dev->of_node, "pwm");
+	if (IS_ERR(pc->pwm_clk)) {
 		dev_err(dev, "failed to get PWM clock\n");
-		return PTR_ERR(pc->clk);
+		return PTR_ERR(pc->pwm_clk);
 	}
 
-	pc->clk_rate = clk_get_rate(pc->clk);
+	pc->clk_rate = clk_get_rate(pc->pwm_clk);
 	if (!pc->clk_rate) {
 		dev_err(dev, "failed to get clock rate\n");
 		return -EINVAL;
 	}
 
-	ret = clk_prepare(pc->clk);
+	ret = clk_prepare(pc->pwm_clk);
 	if (ret) {
 		dev_err(dev, "failed to prepare clock\n");
 		return ret;
@@ -367,7 +373,7 @@ static int sti_pwm_probe(struct platform_device *pdev)
 
 	ret = pwmchip_add(&pc->chip);
 	if (ret < 0) {
-		clk_unprepare(pc->clk);
+		clk_unprepare(pc->pwm_clk);
 		return ret;
 	}
 
@@ -384,7 +390,7 @@ static int sti_pwm_remove(struct platform_device *pdev)
 	for (i = 0; i < pc->cdata->num_devs; i++)
 		pwm_disable(&pc->chip.pwms[i]);
 
-	clk_unprepare(pc->clk);
+	clk_unprepare(pc->pwm_clk);
 
 	return pwmchip_remove(&pc->chip);
 }
-- 
2.8.3

  parent reply	other threads:[~2016-06-08  9:27 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-08  9:21 [PATCH v3 00/20] pwm: Add support for PWM Capture Lee Jones
2016-06-08  9:21 ` [PATCH v3 01/20] ARM: dts: STi: Rename properites in line with PWM naming conventions Lee Jones
2016-06-08  9:21 ` [PATCH v3 02/20] ARM: dts: STiH407: Supply PWM Capture IRQ Lee Jones
2016-06-08  9:21 ` [PATCH v3 03/20] ARM: dts: STiH407: Declare PWM Capture data lines via Pinctrl Lee Jones
2016-06-08  9:21 ` [PATCH v3 04/20] ARM: dts: STiH416: Supply PWM Capture IRQs Lee Jones
2016-06-08  9:21 ` [PATCH v3 05/20] ARM: dts: STiH416: Declare PWM Capture data lines via Pinctrl Lee Jones
2016-06-08  9:21 ` [PATCH v3 06/20] ARM: dts: STiH416: Define PWM Capture clock Lee Jones
2016-06-08  9:21 ` [PATCH v3 07/20] ARM: dts: STiH416: Define the number of PWM Capture channels Lee Jones
2016-06-08  9:21 ` [PATCH v3 08/20] pwm: Add PWM Capture support Lee Jones
2016-06-10 13:53   ` Thierry Reding
2016-06-10 14:38     ` Lee Jones
2016-06-10 16:39       ` Thierry Reding
2016-06-20 11:14         ` Lee Jones
2016-06-08  9:21 ` [PATCH v3 09/20] pwm: sti: Rename channel => device Lee Jones
2016-06-08  9:21 ` [PATCH v3 10/20] pwm: sysfs: Add PWM Capture support Lee Jones
2016-06-10 14:04   ` Thierry Reding
2016-06-10 14:36     ` Lee Jones
2016-06-08  9:21 ` Lee Jones [this message]
2016-06-08  9:21 ` [PATCH v3 12/20] pwm: sti: Only request clock rate when you need to Lee Jones
2016-06-08  9:21 ` [PATCH v3 13/20] pwm: sti: Supply PWM Capture register addresses and bit locations Lee Jones
2016-06-08  9:21 ` [PATCH v3 14/20] pwm: sti: Supply PWM Capture clock handling Lee Jones
2016-06-08  9:21 ` [PATCH v3 15/20] pwm: sti: Initialise PWM Capture device data Lee Jones
2016-06-08  9:21 ` [PATCH v3 16/20] pwm: sti: Add support for PWM Capture IRQs Lee Jones
2016-06-08  9:21 ` [PATCH v3 17/20] pwm: sti: Add PWM Capture call-back Lee Jones
2016-06-08  9:21 ` [PATCH v3 18/20] pwm: sti: It's now valid for number of PWM channels to be zero Lee Jones
2016-06-08  9:21 ` [PATCH v3 19/20] pwm: sti: Take the opportunity to conduct a little house keeping Lee Jones
2016-06-08  9:21 ` [PATCH v3 20/20] dt-bindings: pwm: sti: Update DT bindings with recent changes Lee Jones
2016-06-08 20:51   ` Rob Herring
2016-06-09 11:41     ` Lee Jones
2016-06-10 13:18       ` Thierry Reding
2016-06-10 14:06         ` Lee Jones
2016-06-10 14:53           ` Thierry Reding
2016-06-10 15:19             ` Lee Jones
2016-07-13  9:02             ` Lee Jones
2016-06-10 13:10     ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160608092135.21184-12-lee.jones@linaro.org \
    --to=lee.jones@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@stlinux.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=maxime.coquelin@st.com \
    --cc=patrice.chotard@st.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH v3 11/20] pwm: sti: Reorganise register names in preparation for new functionality' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).