linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Darren Hart <dvhart@infradead.org>
To: Lyude <cpaul@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>,
	Dennis Wassenberg <dennis.wassenberg@secunet.com>,
	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>,
	"open list:THINKPAD ACPI EXTRAS DRIVER" 
	<ibm-acpi-devel@lists.sourceforge.net>,
	"open list:THINKPAD ACPI EXTRAS DRIVER" 
	<platform-driver-x86@vger.kernel.org>,
	open list <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2] thinkpad_acpi: Add support for HKEY version 0x200
Date: Wed, 8 Jun 2016 12:30:06 -0700	[thread overview]
Message-ID: <20160608193006.GB28348@f23x64.localdomain> (raw)
In-Reply-To: <1465397665-9343-1-git-send-email-cpaul@redhat.com>

On Wed, Jun 08, 2016 at 10:54:25AM -0400, Lyude wrote:
> From: Dennis Wassenberg <dennis.wassenberg@secunet.com>
> 
> Lenovo Thinkpad devices T460, T460s, T460p, T560, X260 use
> HKEY version 0x200 without adaptive keyboard.
> 
> HKEY version 0x200 has method MHKA with one parameter value.
> Passing parameter value 1 will get hotkey_all_mask (the same like
> HKEY version 0x100 without parameter). Passing parameter value 2 to
> MHKA method will retrieve hotkey_all_adaptive_mask. If 0 is returned in
> that case there is no adaptive keyboard available.
> 
> Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
> Signed-off-by: Lyude <cpaul@redhat.com>
> Tested-by: Lyude <cpaul@redhat.com>
> Tested-by: Marco Trevisan <marco@ubuntu.com>
> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
> ---
> Changes since v1:
>  - Fix all of the indenting issues
>  - Add appropriate Tested-by's, Signed-off's, etc.
> 
>  drivers/platform/x86/thinkpad_acpi.c | 85 ++++++++++++++++++++++++++----------
>  1 file changed, 63 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 9255ff3..210ecf5 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -2043,6 +2043,7 @@ static int hotkey_autosleep_ack;
>  
>  static u32 hotkey_orig_mask;		/* events the BIOS had enabled */
>  static u32 hotkey_all_mask;		/* all events supported in fw */
> +static u32 hotkey_adaptive_all_mask;	/* all adaptive events supported in fw */
>  static u32 hotkey_reserved_mask;	/* events better left disabled */
>  static u32 hotkey_driver_mask;		/* events needed by the driver */
>  static u32 hotkey_user_mask;		/* events visible to userspace */
> @@ -2742,6 +2743,17 @@ static ssize_t hotkey_all_mask_show(struct device *dev,
>  
>  static DEVICE_ATTR_RO(hotkey_all_mask);
>  
> +/* sysfs hotkey all_mask ----------------------------------------------- */
> +static ssize_t hotkey_adaptive_all_mask_show(struct device *dev,
> +			   struct device_attribute *attr,
> +			   char *buf)
> +{
> +	return snprintf(buf, PAGE_SIZE, "0x%08x\n",
> +			hotkey_adaptive_all_mask | hotkey_source_mask);
> +}
> +
> +static DEVICE_ATTR_RO(hotkey_adaptive_all_mask);
> +
>  /* sysfs hotkey recommended_mask --------------------------------------- */
>  static ssize_t hotkey_recommended_mask_show(struct device *dev,
>  					    struct device_attribute *attr,
> @@ -2985,6 +2997,7 @@ static struct attribute *hotkey_attributes[] __initdata = {
>  	&dev_attr_wakeup_hotunplug_complete.attr,
>  	&dev_attr_hotkey_mask.attr,
>  	&dev_attr_hotkey_all_mask.attr,
> +	&dev_attr_hotkey_adaptive_all_mask.attr,
>  	&dev_attr_hotkey_recommended_mask.attr,
>  #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
>  	&dev_attr_hotkey_source_mask.attr,
> @@ -3321,20 +3334,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
>  	if (!tp_features.hotkey)
>  		return 1;
>  
> -	/*
> -	 * Check if we have an adaptive keyboard, like on the
> -	 * Lenovo Carbon X1 2014 (2nd Gen).
> -	 */
> -	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
> -		if ((hkeyv >> 8) == 2) {
> -			tp_features.has_adaptive_kbd = true;
> -			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
> -					&adaptive_kbd_attr_group);
> -			if (res)
> -				goto err_exit;
> -		}
> -	}
> -
>  	quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
>  				     ARRAY_SIZE(tpacpi_hotkey_qtable));
>  
> @@ -3357,18 +3356,16 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
>  	   A30, R30, R31, T20-22, X20-21, X22-24.  Detected by checking
>  	   for HKEY interface version 0x100 */
>  	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
> -		if ((hkeyv >> 8) != 1) {
> -			pr_err("unknown version of the HKEY interface: 0x%x\n",
> -			       hkeyv);
> -			pr_err("please report this to %s\n", TPACPI_MAIL);
> -		} else {
> +		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
> +			    "firmware HKEY interface version: 0x%x\n",
> +			    hkeyv);
> +
> +		switch (hkeyv >> 8) {
> +		case 1:
>  			/*
>  			 * MHKV 0x100 in A31, R40, R40e,
>  			 * T4x, X31, and later
>  			 */
> -			vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
> -				"firmware HKEY interface version: 0x%x\n",
> -				hkeyv);
>  
>  			/* Paranoia check AND init hotkey_all_mask */
>  			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
> @@ -3381,6 +3378,50 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
>  			} else {
>  				tp_features.hotkey_mask = 1;
>  			}
> +			break;
> +
> +		case 2:
> +			/*
> +			 * MHKV 0x200 in X1, T460s, X260, T560, X1 Tablet (2016)
> +			 */
> +
> +			/* Paranoia check AND init hotkey_all_mask */
> +			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
> +					"MHKA", "dd", 1)) {
> +				pr_err("missing MHKA handler, "
> +				       "please report this to %s\n",

Strings should be kept on the same line so they can be searched for in the
sources. I've corrected this here as well as the existing duplicate message in case 1.

Otherwise, queued for 4.8. Thanks.

-- 
Darren Hart
Intel Open Source Technology Center

  reply	other threads:[~2016-06-08 19:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-07 17:02 [PATCH] thinkpad_acpi: Add support for HKEY version 0x200 Lyude Paul
2016-06-07 21:10 ` [ibm-acpi-devel] " Lyude Paul
2016-06-07 21:43   ` Darren Hart
2016-06-07 22:06   ` Marco Trevisan (Treviño)
2016-06-07 23:53     ` Henrique de Moraes Holschuh
2016-06-08 14:54       ` [PATCH v2] " Lyude
2016-06-08 19:30         ` Darren Hart [this message]
2016-06-09  5:05         ` [ibm-acpi-devel] " Marco Trevisan (Treviño)
2016-06-09 19:57           ` Darren Hart
2016-06-09 21:04             ` Henrique de Moraes Holschuh
2016-06-09 21:18               ` Darren Hart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160608193006.GB28348@f23x64.localdomain \
    --to=dvhart@infradead.org \
    --cc=cpaul@redhat.com \
    --cc=dennis.wassenberg@secunet.com \
    --cc=hmh@hmh.eng.br \
    --cc=ibm-acpi-devel@lists.sourceforge.net \
    --cc=ibm-acpi@hmh.eng.br \
    --cc=linux-kernel@vger.kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).