From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752621AbcFTDuw (ORCPT ); Sun, 19 Jun 2016 23:50:52 -0400 Received: from mail-pa0-f44.google.com ([209.85.220.44]:33784 "EHLO mail-pa0-f44.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751974AbcFTDuf (ORCPT ); Sun, 19 Jun 2016 23:50:35 -0400 From: Xinliang Liu To: p.zabel@pengutronix.de Cc: linux-kernel@vger.kernel.org, robh+dt@kernel.org, xuwei5@hisilicon.com, puck.chen@hisilicon.com, saberlily.xia@hisilicon.com, kong.kongxinwei@hisilicon.com, guodong.xu@linaro.org, Xinliang Liu Subject: [PATCH v3 1/4] reset: hisilicon: Add media reset controller binding Date: Mon, 20 Jun 2016 11:50:04 +0800 Message-Id: <20160620035007.229629-2-xinliang.liu@linaro.org> X-Mailer: git-send-email 2.8.3 In-Reply-To: <20160620035007.229629-1-xinliang.liu@linaro.org> References: <20160620035007.229629-1-xinliang.liu@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add compatible for media reset controller. Actually, there are two reset controllers in hi6220 SoC: The peripheral reset controller bits are part of sysctrl registers. The media reset controller bits are part of mediactrl registers. So for the compatible part, it should contain "syscon" for both peripheral and media reset controller. Signed-off-by: Xinliang Liu --- Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt index e0b185a944ba..c25da39df707 100644 --- a/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt +++ b/Documentation/devicetree/bindings/reset/hisilicon,hi6220-reset.txt @@ -8,7 +8,9 @@ The reset controller registers are part of the system-ctl block on hi6220 SoC. Required properties: -- compatible: may be "hisilicon,hi6220-sysctrl" +- compatible: should be one of the following: + - "hisilicon,hi6220-sysctrl", "syscon" : For peripheral reset controller. + - "hisilicon,hi6220-mediactrl", "syscon" : For media reset controller. - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below -- 2.8.3