linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Leon Romanovsky <leon@kernel.org>
To: Lijun Ou <oulijun@huawei.com>
Cc: dledford@redhat.com, sean.hefty@intel.com,
	hal.rosenstock@gmail.com, davem@davemloft.net,
	jeffrey.t.kirsher@intel.com, jiri@mellanox.com,
	ogerlitz@mellanox.com, linux-rdma@vger.kernel.org,
	linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
	gongyangming@huawei.com, xiaokun@huawei.com,
	tangchaofei@huawei.com, haifeng.wei@huawei.com,
	yisen.zhuang@huawei.com, yankejian@huawei.com,
	charles.chenxin@huawei.com, linuxarm@huawei.com
Subject: Re: [PATCH v10 03/22] IB/hns: Add initial main frame driver and get cfg info
Date: Fri, 24 Jun 2016 14:48:31 +0300	[thread overview]
Message-ID: <20160624114831.GD23995@leon.nu> (raw)
In-Reply-To: <1466087730-54856-4-git-send-email-oulijun@huawei.com>

[-- Attachment #1: Type: text/plain, Size: 10999 bytes --]

On Thu, Jun 16, 2016 at 10:35:11PM +0800, Lijun Ou wrote:
> This patch mainly added the initial bare main driver. It
> could get the relative configure information of net node.
> 
> Signed-off-by: Wei Hu <xavier.huwei@huawei.com>
> Signed-off-by: Nenglong Zhao <zhaonenglong@hisilicon.com>
> Signed-off-by: Lijun Ou <oulijun@huawei.com>
> ---
> PATCH v9:
> This fixes comments given by Leon Romanovsky over the PATCH v8:
>   Link: https://lkml.org/lkml/2016/6/9/56
> 
> PATCH v8/v7/v6:
> - No change over the PATCH v5
> 
> PATCH v5:
> - The initial patch which was redesigned based on the second patch
>   in PATCH v4
> ---
> ---
>  drivers/infiniband/hw/hns/hns_roce_device.h |  73 ++++++++++
>  drivers/infiniband/hw/hns/hns_roce_main.c   | 200 ++++++++++++++++++++++++++++
>  2 files changed, 273 insertions(+)
>  create mode 100644 drivers/infiniband/hw/hns/hns_roce_device.h
>  create mode 100644 drivers/infiniband/hw/hns/hns_roce_main.c
> 
> diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h
> new file mode 100644
> index 0000000..946b470
> --- /dev/null
> +++ b/drivers/infiniband/hw/hns/hns_roce_device.h
> @@ -0,0 +1,73 @@
> +/*
> + * Copyright (c) 2016 Hisilicon Limited.
> + *
> + * This software is available to you under a choice of one of two
> + * licenses.  You may choose to be licensed under the terms of the GNU
> + * General Public License (GPL) Version 2, available from the file
> + * COPYING in the main directory of this source tree, or the
> + * OpenIB.org BSD license below:
> + *
> + *     Redistribution and use in source and binary forms, with or
> + *     without modification, are permitted provided that the following
> + *     conditions are met:
> + *
> + *      - Redistributions of source code must retain the above
> + *        copyright notice, this list of conditions and the following
> + *        disclaimer.
> + *
> + *      - Redistributions in binary form must reproduce the above
> + *        copyright notice, this list of conditions and the following
> + *        disclaimer in the documentation and/or other materials
> + *        provided with the distribution.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + */
> +
> +#ifndef _HNS_ROCE_DEVICE_H
> +#define _HNS_ROCE_DEVICE_H
> +
> +#include <linux/platform_device.h>
> +#include <linux/radix-tree.h>
> +#include <linux/semaphore.h>
> +#include <rdma/ib_addr.h>
> +#include <rdma/ib_smi.h>
> +#include <rdma/ib_umem.h>
> +#include <rdma/ib_user_verbs.h>
> +#include <rdma/ib_verbs.h>
> +
> +#define DRV_NAME "hns_roce"
> +
> +#define HNS_ROCE_MAX_IRQ_NUM			34
> +#define HNS_ROCE_MAX_PORTS			6
> +
> +struct hns_roce_ib_iboe {
> +	struct net_device      *netdevs[HNS_ROCE_MAX_PORTS];
> +	u8			phy_port[HNS_ROCE_MAX_PORTS];
> +};
> +
> +struct hns_roce_caps {
> +	u8			num_ports;
> +};
> +
> +struct hns_roce_dev {
> +	struct ib_device	ib_dev;
> +	struct platform_device  *pdev;
> +	const char		*irq_names;
> +	struct hns_roce_ib_iboe iboe;
> +
> +	int			irq[HNS_ROCE_MAX_IRQ_NUM];
> +	u8 __iomem		*reg_base;
> +	struct hns_roce_caps	caps;
> +
> +	int			cmd_mod;
> +	int			loop_idc;
> +};
> +
> +#endif /* _HNS_ROCE_DEVICE_H */
> diff --git a/drivers/infiniband/hw/hns/hns_roce_main.c b/drivers/infiniband/hw/hns/hns_roce_main.c
> new file mode 100644
> index 0000000..8924ce3
> --- /dev/null
> +++ b/drivers/infiniband/hw/hns/hns_roce_main.c
> @@ -0,0 +1,200 @@
> +/*
> + * Copyright (c) 2016 Hisilicon Limited.
> + * Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
> + *
> + * This software is available to you under a choice of one of two
> + * licenses.  You may choose to be licensed under the terms of the GNU
> + * General Public License (GPL) Version 2, available from the file
> + * COPYING in the main directory of this source tree, or the
> + * OpenIB.org BSD license below:
> + *
> + *     Redistribution and use in source and binary forms, with or
> + *     without modification, are permitted provided that the following
> + *     conditions are met:
> + *
> + *      - Redistributions of source code must retain the above
> + *        copyright notice, this list of conditions and the following
> + *        disclaimer.
> + *
> + *      - Redistributions in binary form must reproduce the above
> + *        copyright notice, this list of conditions and the following
> + *        disclaimer in the documentation and/or other materials
> + *        provided with the distribution.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
> + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
> + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
> + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + */
> +
> +#include <linux/cdev.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/ethtool.h>
> +#include <linux/etherdevice.h>
> +#include <linux/fs.h>
> +#include <linux/init.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +#include <linux/netdevice.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_net.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include <net/ipv6.h>
> +#include <net/addrconf.h>
> +#include <rdma/ib_addr.h>
> +#include <rdma/ib_smi.h>
> +#include <rdma/ib_umem.h>
> +#include <rdma/ib_user_verbs.h>
> +#include <rdma/ib_verbs.h>
> +#include "hns_roce_device.h"

Most of the headers are not needed here.
Please clean them.

> +
> +static int hns_roce_get_cfg(struct hns_roce_dev *hr_dev)
> +{
> +	int i;
> +	u8 phy_port;
> +	int port_cnt = 0;
> +	struct device *dev = &hr_dev->pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct device_node *net_node;
> +	struct net_device *netdev = NULL;
> +	struct platform_device *pdev = NULL;
> +	struct resource *res;
> +
> +	if (!of_device_is_compatible(np, "hisilicon,hns-roce-v1")) {
> +		dev_err(dev, "device no compatible!\n");
> +		return -EINVAL;
> +	}
> +
> +	res = platform_get_resource(hr_dev->pdev, IORESOURCE_MEM, 0);
> +	hr_dev->reg_base = devm_ioremap_resource(dev, res);
> +	if (!hr_dev->reg_base)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < HNS_ROCE_MAX_PORTS; i++) {
> +		net_node = of_parse_phandle(np, "eth-handle", i);
> +		if (net_node) {
> +			pdev = of_find_device_by_node(net_node);
> +			netdev = platform_get_drvdata(pdev);
> +			phy_port = (u8)i;
> +			if (netdev) {
> +				hr_dev->iboe.netdevs[port_cnt] = netdev;
> +				hr_dev->iboe.phy_port[port_cnt] = phy_port;
> +			} else {
> +				return -ENODEV;
> +			}
> +			port_cnt++;
> +		}
> +	}

Do you want to check port_cnt value, before continue?

> +
> +	hr_dev->caps.num_ports = port_cnt;
> +
> +	/* Cmd issue mode: 0 is poll, 1 is event */
> +	hr_dev->cmd_mod = 1;
> +	hr_dev->loop_idc = 0;
> +
> +	for (i = 0; i < HNS_ROCE_MAX_IRQ_NUM; i++) {
> +		hr_dev->irq[i] = platform_get_irq(hr_dev->pdev, i);
> +		if (hr_dev->irq[i] <= 0) {
> +			dev_err(dev, "Get No.%d irq resource failed!\n", i);
> +			return -EINVAL;
> +		}
> +
> +		if (of_property_read_string_index(np, "interrupt-names", i,
> +						  &hr_dev->irq_names))
> +			return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> +* hns_roce_probe - RoCE driver entrance
> +* @pdev: pointer to platform device
> +* Return : int
> +*
> +*/
> +static int hns_roce_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct hns_roce_dev *hr_dev;
> +	struct device *dev = &pdev->dev;
> +
> +	hr_dev = (struct hns_roce_dev *)ib_alloc_device(sizeof(*hr_dev));
> +	if (!hr_dev)
> +		return -ENOMEM;
> +
> +	memset((u8 *)hr_dev + sizeof(struct ib_device), 0,
> +		sizeof(struct hns_roce_dev) - sizeof(struct ib_device));
> +
> +	hr_dev->pdev = pdev;
> +	platform_set_drvdata(pdev, hr_dev);
> +
> +	if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64ULL)))
> +		dev_info(dev, "set mask to 64bit\n");
> +	else if (!dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32ULL)))
> +		dev_info(dev, "set mask to 32bit\n");
> +	else {
> +		dev_err(dev, "No usable DMA addressing mode\n");

Can you please use one style in your prints "set mask..." vs. "No usable
.."?

> +		ret = -EIO;
> +		goto error_failed_get_cfg;
> +	}
> +
> +	ret = hns_roce_get_cfg(hr_dev);
> +	if (ret) {
> +		dev_err(dev, "Get Configuration failed!\n");
> +		goto error_failed_get_cfg;
> +	}
> +
> +error_failed_get_cfg:
> +	ib_dealloc_device(&hr_dev->ib_dev);
> +
> +	return ret;
> +}
> +
> +/**
> +* hns_roce_remove - remove roce device
> +* @pdev: pointer to platform device
> +*/
> +static int hns_roce_remove(struct platform_device *pdev)
> +{
> +	struct hns_roce_dev *hr_dev = platform_get_drvdata(pdev);
> +
> +	ib_dealloc_device(&hr_dev->ib_dev);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id hns_roce_of_match[] = {
> +	{ .compatible = "hisilicon,hns-roce-v1",},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, hns_roce_of_match);
> +
> +static struct platform_driver hns_roce_driver = {
> +	.probe = hns_roce_probe,
> +	.remove = hns_roce_remove,
> +	.driver = {
> +		.name = DRV_NAME,
> +		.of_match_table = hns_roce_of_match,
> +	},
> +};
> +
> +module_platform_driver(hns_roce_driver);
> +
> +MODULE_LICENSE("GPL v2");

I'm not a lawyer and don't know if relicensing is possible, but original
code (mlx4) was licensed under GPL/BSD.

> +MODULE_AUTHOR("Wei Hu <xavier.huwei@huawei.com>");
> +MODULE_AUTHOR("Nenglong Zhao <zhaonenglong@hisilicon.com>");
> +MODULE_AUTHOR("Lijun Ou <oulijun@huawei.com>");
> +MODULE_DESCRIPTION("HISILICON RoCE driver");
> +MODULE_ALIAS("platform:" DRV_NAME);

Is this alias needed? Did you check it? Will it concatenate strings?

> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2016-06-24 11:48 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-16 14:35 [PATCH v10 00/22] Add HiSilicon RoCE driver Lijun Ou
2016-06-16 14:35 ` [PATCH v10 01/22] net: hns: Add reset function support for " Lijun Ou
2016-06-24 11:49   ` Leon Romanovsky
2016-06-27  6:41     ` oulijun
2016-06-16 14:35 ` [PATCH v10 02/22] devicetree: bindings: IB: Add binding document for HiSilicon RoCE Lijun Ou
2016-06-16 14:35 ` [PATCH v10 03/22] IB/hns: Add initial main frame driver and get cfg info Lijun Ou
2016-06-24 11:48   ` Leon Romanovsky [this message]
     [not found]     ` <576E5D0B.7010003@huawei.com>
2016-06-27  7:00       ` Leon Romanovsky
2016-06-27  7:29         ` Wei Hu (Xavier)
2016-06-16 14:35 ` [PATCH v10 04/22] IB/hns: Add RoCE engine reset function Lijun Ou
2016-06-24 14:59   ` Leon Romanovsky
     [not found]     ` <576E5C21.5030904@huawei.com>
2016-06-27  8:01       ` Leon Romanovsky
2016-06-27  8:31         ` oulijun
2016-06-28  6:31           ` Wei Hu (Xavier)
2016-06-28  8:09             ` Leon Romanovsky
2016-06-16 14:35 ` [PATCH v10 05/22] IB/hns: Add initial profile resource Lijun Ou
2016-06-24 15:10   ` Leon Romanovsky
2016-06-28  6:56     ` oulijun
2016-06-16 14:35 ` [PATCH v10 06/22] IB/hns: Add initial cmd operation Lijun Ou
2016-06-20 13:33   ` Leon Romanovsky
2016-06-21 10:50     ` Wei Hu (Xavier)
2016-06-21 11:28       ` Leon Romanovsky
2016-06-21 13:01         ` Wei Hu (Xavier)
2016-06-22  4:54           ` Leon Romanovsky
2016-06-22  6:50             ` Wei Hu (Xavier)
2016-06-16 14:35 ` [PATCH v10 07/22] IB/hns: Add event queue support Lijun Ou
2016-06-24 15:46   ` Leon Romanovsky
2016-06-24 15:56     ` Doug Ledford
2016-06-29  8:53     ` oulijun
2016-06-29 10:41       ` Leon Romanovsky
2016-06-16 14:35 ` [PATCH v10 08/22] IB/hns: Add icm support Lijun Ou
2016-06-17  9:58   ` Leon Romanovsky
     [not found]     ` <57677314.70909@huawei.com>
2016-06-20  6:06       ` Leon Romanovsky
2016-06-20  7:49         ` Wei Hu (Xavier)
2016-06-20  9:27           ` Leon Romanovsky
2016-06-20  9:48             ` Wei Hu (Xavier)
2016-06-20 13:04               ` Leon Romanovsky
2016-06-21  4:37                 ` Wei Hu (Xavier)
2016-06-21 11:55                   ` Leon Romanovsky
2016-06-22  3:53                     ` Wei Hu (Xavier)
2016-06-16 14:35 ` [PATCH v10 09/22] IB/hns: Add hca support Lijun Ou
2016-06-24 15:50   ` Leon Romanovsky
2016-06-16 14:35 ` [PATCH v10 10/22] IB/hns: Add process flow to init RoCE engine Lijun Ou
2016-06-16 14:35 ` [PATCH v10 11/22] IB/hns: Add IB device registration Lijun Ou
2016-06-16 14:35 ` [PATCH v10 12/22] IB/hns: Set mtu and gid support Lijun Ou
2016-06-16 14:35 ` [PATCH v10 13/22] IB/hns: Add interface of the protocol stack registration Lijun Ou
2016-06-16 14:35 ` [PATCH v10 14/22] IB/hns: Add operations support for IB device and port Lijun Ou
2016-06-16 14:35 ` [PATCH v10 15/22] IB/hns: Add PD operations support Lijun Ou
2016-06-16 14:35 ` [PATCH v10 16/22] IB/hns: Add ah " Lijun Ou
2016-06-16 14:35 ` [PATCH v10 17/22] IB/hns: Add QP " Lijun Ou
2016-06-16 14:35 ` [PATCH v10 18/22] IB/hns: Add CQ " Lijun Ou
2016-06-16 14:35 ` [PATCH v10 19/22] IB/hns: Add memory region " Lijun Ou
2016-06-16 14:35 ` [PATCH v10 20/22] IB/hns: Add operation for getting immutable port Lijun Ou
2016-06-16 14:35 ` [PATCH v10 21/22] IB/hns: Kconfig and Makefile for RoCE module Lijun Ou
2016-06-16 14:35 ` [PATCH v10 22/22] MAINTAINERS: Add maintainers for HiSilicon RoCE driver Lijun Ou
2016-06-24 15:55 ` [PATCH v10 00/22] Add " Leon Romanovsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160624114831.GD23995@leon.nu \
    --to=leon@kernel.org \
    --cc=charles.chenxin@huawei.com \
    --cc=davem@davemloft.net \
    --cc=dledford@redhat.com \
    --cc=gongyangming@huawei.com \
    --cc=haifeng.wei@huawei.com \
    --cc=hal.rosenstock@gmail.com \
    --cc=jeffrey.t.kirsher@intel.com \
    --cc=jiri@mellanox.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=netdev@vger.kernel.org \
    --cc=ogerlitz@mellanox.com \
    --cc=oulijun@huawei.com \
    --cc=sean.hefty@intel.com \
    --cc=tangchaofei@huawei.com \
    --cc=xiaokun@huawei.com \
    --cc=yankejian@huawei.com \
    --cc=yisen.zhuang@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).