From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752354AbcFZH3W (ORCPT ); Sun, 26 Jun 2016 03:29:22 -0400 Received: from mail-pf0-f177.google.com ([209.85.192.177]:36857 "EHLO mail-pf0-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752108AbcFZH2y (ORCPT ); Sun, 26 Jun 2016 03:28:54 -0400 From: Stephen Boyd To: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Neil Armstrong , Arnd Bergmann , Felipe Balbi , Peter Chen , Greg Kroah-Hartman , Heikki Krogerus Subject: [PATCH 09/21] usb: chipidea: Add support for ULPI PHY bus Date: Sun, 26 Jun 2016 00:28:26 -0700 Message-Id: <20160626072838.28082-10-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.9.0.rc2.8.ga28705d In-Reply-To: <20160626072838.28082-1-stephen.boyd@linaro.org> References: <20160626072838.28082-1-stephen.boyd@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Some phys for the chipidea controller are controlled via the ULPI viewport. Add support for the ULPI bus so that these sorts of phys can be probed and read/written automatically without having to duplicate the viewport logic in each phy driver. Cc: Peter Chen Cc: Greg Kroah-Hartman Cc: Heikki Krogerus Signed-off-by: Stephen Boyd --- drivers/usb/chipidea/Kconfig | 7 +++ drivers/usb/chipidea/Makefile | 1 + drivers/usb/chipidea/ci.h | 20 ++++++++ drivers/usb/chipidea/core.c | 30 ++++++++--- drivers/usb/chipidea/ulpi.c | 113 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 165 insertions(+), 6 deletions(-) create mode 100644 drivers/usb/chipidea/ulpi.c diff --git a/drivers/usb/chipidea/Kconfig b/drivers/usb/chipidea/Kconfig index 3644a3500b70..4f8c342a8865 100644 --- a/drivers/usb/chipidea/Kconfig +++ b/drivers/usb/chipidea/Kconfig @@ -37,4 +37,11 @@ config USB_CHIPIDEA_HOST Say Y here to enable host controller functionality of the ChipIdea driver. +config USB_CHIPIDEA_ULPI + bool "ChipIdea ULPI PHY support" + depends on USB_ULPI_BUS=y || USB_ULPI_BUS=USB_CHIPIDEA + help + Say Y here if you have a ULPI PHY attached to your ChipIdea + controller. + endif diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 518e445476c3..39fca5715ed3 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -4,6 +4,7 @@ ci_hdrc-y := core.o otg.o debug.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_UDC) += udc.o ci_hdrc-$(CONFIG_USB_CHIPIDEA_HOST) += host.o ci_hdrc-$(CONFIG_USB_OTG_FSM) += otg_fsm.o +ci_hdrc-$(CONFIG_USB_CHIPIDEA_ULPI) += ulpi.o # Glue/Bridge layers go here diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index f87805235caa..14aa20525547 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -18,6 +18,8 @@ #include #include #include +#include +#include /****************************************************************************** * DEFINE @@ -52,6 +54,7 @@ enum ci_hw_regs { OP_ENDPTLISTADDR, OP_TTCTRL, OP_BURSTSIZE, + OP_ULPI_VIEWPORT, OP_PORTSC, OP_DEVLC, OP_OTGSC, @@ -187,6 +190,7 @@ struct hw_bank { * @test_mode: the selected test mode * @platdata: platform specific information supplied by parent device * @vbus_active: is VBUS active + * @ulpi: pointer to ULPI device, if any * @phy: pointer to PHY, if any * @usb_phy: pointer to USB PHY, if any and if using the USB PHY framework * @hcd: pointer to usb_hcd for ehci host driver @@ -236,6 +240,10 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; +#ifdef CONFIG_USB_CHIPIDEA_ULPI + struct ulpi *ulpi; + struct ulpi_ops ulpi_ops; +#endif struct phy *phy; /* old usb_phy interface */ struct usb_phy *usb_phy; @@ -418,6 +426,17 @@ static inline bool ci_otg_is_fsm_mode(struct ci_hdrc *ci) #endif } +#if IS_ENABLED(CONFIG_USB_CHIPIDEA_ULPI) +int ci_ulpi_init(struct ci_hdrc *ci); +void ci_ulpi_exit(struct ci_hdrc *ci); +int ci_ulpi_resume(struct ci_hdrc *ci); +#else +static inline int ci_ulpi_init(struct ci_hdrc *ci) { return 0; } +static inline void ci_ulpi_exit(struct ci_hdrc *ci) { } +static inline int ci_ulpi_resume(struct ci_hdrc *ci) { return 0; } +#endif + + u32 hw_read_intr_enable(struct ci_hdrc *ci); u32 hw_read_intr_status(struct ci_hdrc *ci); @@ -432,6 +451,7 @@ int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask, u32 value, unsigned int timeout_ms); void ci_usb_phy_exit(struct ci_hdrc *ci); +void hw_phymode_configure(struct ci_hdrc *ci); int ci_platform_configure(struct ci_hdrc *ci); int dbg_create_files(struct ci_hdrc *ci); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index a01611c7f815..ea84fc0a03a6 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -86,6 +86,7 @@ static const u8 ci_regs_nolpm[] = { [OP_ENDPTLISTADDR] = 0x18U, [OP_TTCTRL] = 0x1CU, [OP_BURSTSIZE] = 0x20U, + [OP_ULPI_VIEWPORT] = 0x30U, [OP_PORTSC] = 0x44U, [OP_DEVLC] = 0x84U, [OP_OTGSC] = 0x64U, @@ -110,6 +111,7 @@ static const u8 ci_regs_lpm[] = { [OP_ENDPTLISTADDR] = 0x18U, [OP_TTCTRL] = 0x1CU, [OP_BURSTSIZE] = 0x20U, + [OP_ULPI_VIEWPORT] = 0x30U, [OP_PORTSC] = 0x44U, [OP_DEVLC] = 0x84U, [OP_OTGSC] = 0xC4U, @@ -285,7 +287,7 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base) return 0; } -static void hw_phymode_configure(struct ci_hdrc *ci) +void hw_phymode_configure(struct ci_hdrc *ci) { u32 portsc, lpm, sts = 0; @@ -893,6 +895,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) CI_HDRC_IMX28_WRITE_FIX); ci->supports_runtime_pm = !!(ci->platdata->flags & CI_HDRC_SUPPORTS_RUNTIME_PM); + platform_set_drvdata(pdev, ci); ret = hw_device_init(ci, base); if (ret < 0) { @@ -900,6 +903,10 @@ static int ci_hdrc_probe(struct platform_device *pdev) return -ENODEV; } + ret = ci_ulpi_init(ci); + if (ret) + return ret; + if (ci->platdata->phy) { ci->phy = ci->platdata->phy; } else if (ci->platdata->usb_phy) { @@ -910,11 +917,15 @@ static int ci_hdrc_probe(struct platform_device *pdev) /* if both generic PHY and USB PHY layers aren't enabled */ if (PTR_ERR(ci->phy) == -ENOSYS && - PTR_ERR(ci->usb_phy) == -ENXIO) - return -ENXIO; + PTR_ERR(ci->usb_phy) == -ENXIO) { + ret = -ENXIO; + goto deinit_phy; + } - if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) - return -EPROBE_DEFER; + if (IS_ERR(ci->phy) && IS_ERR(ci->usb_phy)) { + ret = -EPROBE_DEFER; + goto deinit_phy; + } if (IS_ERR(ci->phy)) ci->phy = NULL; @@ -993,7 +1004,6 @@ static int ci_hdrc_probe(struct platform_device *pdev) } } - platform_set_drvdata(pdev, ci); ret = devm_request_irq(dev, ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name, ci); if (ret) @@ -1024,6 +1034,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) stop: ci_role_destroy(ci); deinit_phy: + ci_ulpi_exit(ci); return ret; } @@ -1042,6 +1053,7 @@ static int ci_hdrc_remove(struct platform_device *pdev) ci_extcon_unregister(ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); + ci_ulpi_exit(ci); return 0; } @@ -1089,6 +1101,7 @@ static void ci_controller_suspend(struct ci_hdrc *ci) static int ci_controller_resume(struct device *dev) { struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret; dev_dbg(dev, "at %s\n", __func__); @@ -1098,6 +1111,11 @@ static int ci_controller_resume(struct device *dev) } ci_hdrc_enter_lpm(ci, false); + + ret = ci_ulpi_resume(ci); + if (ret) + return ret; + if (ci->usb_phy) { usb_phy_set_suspend(ci->usb_phy, 0); usb_phy_set_wakeup(ci->usb_phy, false); diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c new file mode 100644 index 000000000000..3962255ff687 --- /dev/null +++ b/drivers/usb/chipidea/ulpi.c @@ -0,0 +1,113 @@ +/* + * Copyright (c) 2016 Linaro Ltd. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#include "ci.h" + +#define ULPI_WAKEUP BIT(31) +#define ULPI_RUN BIT(30) +#define ULPI_WRITE BIT(29) +#define ULPI_SYNC_STATE BIT(27) +#define ULPI_ADDR(n) ((n) << 16) +#define ULPI_DATA(n) (n) + +static int ci_ulpi_wait(struct ci_hdrc *ci, u32 mask) +{ + unsigned long usec = 10000; + + while (usec--) { + if (!hw_read(ci, OP_ULPI_VIEWPORT, mask)) + return 0; + + udelay(1); + } + + return -ETIMEDOUT; +} + +static int ci_ulpi_read(struct ulpi_ops *ops, u8 addr) +{ + struct ci_hdrc *ci = dev_get_drvdata(ops->dev); + int ret; + + hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); + ret = ci_ulpi_wait(ci, ULPI_WAKEUP); + if (ret) + return ret; + + hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_RUN | ULPI_ADDR(addr)); + ret = ci_ulpi_wait(ci, ULPI_RUN); + if (ret) + return ret; + + return hw_read(ci, OP_ULPI_VIEWPORT, GENMASK(15, 8)) >> 8; +} + +static int ci_ulpi_write(struct ulpi_ops *ops, u8 addr, u8 val) +{ + struct ci_hdrc *ci = dev_get_drvdata(ops->dev); + int ret; + + hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, ULPI_WRITE | ULPI_WAKEUP); + ret = ci_ulpi_wait(ci, ULPI_WAKEUP); + if (ret) + return ret; + + hw_write(ci, OP_ULPI_VIEWPORT, 0xffffffff, + ULPI_RUN | ULPI_WRITE | ULPI_ADDR(addr) | val); + return ci_ulpi_wait(ci, ULPI_RUN); +} + +int ci_ulpi_init(struct ci_hdrc *ci) +{ + if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI) + return 0; + + /* + * Set PORTSC correctly so we can read/write ULPI registers for + * identification purposes + */ + hw_phymode_configure(ci); + + ci->ulpi_ops.read = ci_ulpi_read; + ci->ulpi_ops.write = ci_ulpi_write; + ci->ulpi = ulpi_register_interface(ci->dev, &ci->ulpi_ops); + if (IS_ERR(ci->ulpi)) + dev_err(ci->dev, "failed to register ULPI interface"); + + return PTR_ERR_OR_ZERO(ci->ulpi); +} + +void ci_ulpi_exit(struct ci_hdrc *ci) +{ + if (ci->ulpi) { + ulpi_unregister_interface(ci->ulpi); + ci->ulpi = NULL; + } +} + +int ci_ulpi_resume(struct ci_hdrc *ci) +{ + int cnt = 100000; + + while (cnt-- > 0) { + if (hw_read(ci, OP_ULPI_VIEWPORT, ULPI_SYNC_STATE)) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} -- 2.9.0.rc2.8.ga28705d