From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752259AbcFZH3O (ORCPT ); Sun, 26 Jun 2016 03:29:14 -0400 Received: from mail-pf0-f181.google.com ([209.85.192.181]:35616 "EHLO mail-pf0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752080AbcFZH2t (ORCPT ); Sun, 26 Jun 2016 03:28:49 -0400 From: Stephen Boyd To: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Andy Gross , Bjorn Andersson , Neil Armstrong , Arnd Bergmann , Felipe Balbi , Peter Chen , Greg Kroah-Hartman , "Ivan T. Ivanov" Subject: [PATCH 05/21] usb: chipidea: Handle extcon events properly Date: Sun, 26 Jun 2016 00:28:22 -0700 Message-Id: <20160626072838.28082-6-stephen.boyd@linaro.org> X-Mailer: git-send-email 2.9.0.rc2.8.ga28705d In-Reply-To: <20160626072838.28082-1-stephen.boyd@linaro.org> References: <20160626072838.28082-1-stephen.boyd@linaro.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org We're currently emulating the vbus and id interrupts in the OTGSC read API, but we also need to make sure that if we're handling the events with extcon that we don't enable the interrupts for those events in the hardware. Therefore, properly emulate this register if we're using extcon, but don't enable the interrupts. This allows me to get my cable connect/disconnect working properly without getting spurious interrupts on my device that uses an extcon for these two events. Cc: Peter Chen Cc: Greg Kroah-Hartman Cc: "Ivan T. Ivanov" Fixes: 3ecb3e09b042 ("usb: chipidea: Use extcon framework for VBUS and ID detect") Signed-off-by: Stephen Boyd --- drivers/usb/chipidea/otg.c | 46 +++++++++++++++++++++++++++++++++++++++----- include/linux/usb/chipidea.h | 2 ++ 2 files changed, 43 insertions(+), 5 deletions(-) diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c index 763a8332b009..b6a88bea4cac 100644 --- a/drivers/usb/chipidea/otg.c +++ b/drivers/usb/chipidea/otg.c @@ -44,12 +44,15 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) else val &= ~OTGSC_BSVIS; - cable->changed = false; - if (cable->state) val |= OTGSC_BSV; else val &= ~OTGSC_BSV; + + if (cable->enabled) + val |= OTGSC_BSVIE; + else + val &= ~OTGSC_BSVIE; } cable = &ci->platdata->id_extcon; @@ -59,15 +62,18 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) else val &= ~OTGSC_IDIS; - cable->changed = false; - if (cable->state) val |= OTGSC_ID; else val &= ~OTGSC_ID; + + if (cable->enabled) + val |= OTGSC_IDIE; + else + val &= ~OTGSC_IDIE; } - return val; + return val & mask; } /** @@ -77,6 +83,36 @@ u32 hw_read_otgsc(struct ci_hdrc *ci, u32 mask) */ void hw_write_otgsc(struct ci_hdrc *ci, u32 mask, u32 data) { + struct ci_hdrc_cable *cable; + + cable = &ci->platdata->vbus_extcon; + if (!IS_ERR(cable->edev)) { + if (data & mask & OTGSC_BSVIS) + cable->changed = false; + + /* Don't enable vbus interrupt if using external notifier */ + if (data & mask & OTGSC_BSVIE) { + cable->enabled = true; + data &= ~OTGSC_BSVIE; + } else if (mask & OTGSC_BSVIE) { + cable->enabled = false; + } + } + + cable = &ci->platdata->id_extcon; + if (!IS_ERR(cable->edev)) { + if (data & mask & OTGSC_IDIS) + cable->changed = false; + + /* Don't enable id interrupt if using external notifier */ + if (data & mask & OTGSC_IDIE) { + cable->enabled = true; + data &= ~OTGSC_IDIE; + } else if (mask & OTGSC_IDIE) { + cable->enabled = false; + } + } + hw_write(ci, OP_OTGSC, mask | OTGSC_INT_STATUS_BITS, data); } diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 5dd75fa47dd8..f9be467d6695 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -14,6 +14,7 @@ struct ci_hdrc; * struct ci_hdrc_cable - structure for external connector cable state tracking * @state: current state of the line * @changed: set to true when extcon event happen + * @enabled: set to true if we've enabled the vbus or id interrupt * @edev: device which generate events * @ci: driver state of the chipidea device * @nb: hold event notification callback @@ -22,6 +23,7 @@ struct ci_hdrc; struct ci_hdrc_cable { bool state; bool changed; + bool enabled; struct extcon_dev *edev; struct ci_hdrc *ci; struct notifier_block nb; -- 2.9.0.rc2.8.ga28705d