linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wim Van Sebroeck <wim@iguana.be>
To: Neil Armstrong <narmstrong@baylibre.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org,
	linux-watchdog@vger.kernel.org
Subject: Re: [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver
Date: Sun, 17 Jul 2016 22:22:35 +0200	[thread overview]
Message-ID: <20160717202235.GD916@spo001.leaseweb.nl> (raw)
In-Reply-To: <1468141867-4172-1-git-send-email-narmstrong@baylibre.com>

Hi Neil,

> Adds support for the Amlogic Meson GXBB SoC Watchdog Timer.
> It differs from the meson6/meson8b HW, so need for a separate driver.
> The HW provides a divider capable of having a 1ms timebase thus simplifying
> the counter update.
> The restart call is not provided even if the HW is capable of triggering a
> system reset immediately because of the PSCI firmare having such functionnality.
> The watchdog is not expected to be running at boot time since there is a separate
> system-level watchdog running from the SCPI co-processor, but this case would be
> handle in a next driver update.
> 
> Changes since v2 at http://lkml.kernel.org/r/1464943007-18000-1-git-send-email-narmstrong@baylibre.com :
> - Fix set_timeout behaviour
> 
> Changes since v1 at http://lkml.kernel.org/r/1464614948-28247-1-git-send-email-narmstrong@baylibre.com :
> - Update default timeout to 30sec
> - Add separate CONFIG_
> - Remove unused defines & functions
> - Fix indentation
> - Check set_timeout max value
> - Reorder includes alphabetically
> - Switch to human identify string
> - clk_disable_unprepare on probe failure or removal
> 
> Changes since RFC version at http://lkml.kernel.org/r/1464249112-13658-1-git-send-email-narmstrong@baylibre.com :
> - Remove status callback, will re-introduce it later to managed the already-running use case
> - Fix registers defines indentation
> - Fix space between operators
> - Make all callbacks static functions
> - Fix bindings with missing clocks attribute
> - Do not stop/start watchdog on a timeout setup
> - Fix probe device configuration
> 
> Neil Armstrong (3):
>   watchdog: Add Meson GXBB Watchdog Driver
>   dt-bindings: watchdog: Add Meson GXBB Watchdog bindings
>   ARM64: dts: amlogic: meson-gxbb: Add watchdog node
> 
>  .../bindings/watchdog/meson-gxbb-wdt.txt           |  16 ++
>  arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi        |   6 +
>  drivers/watchdog/Kconfig                           |  10 +
>  drivers/watchdog/Makefile                          |   1 +
>  drivers/watchdog/meson_gxbb_wdt.c                  | 270 +++++++++++++++++++++
>  5 files changed, 303 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
>  create mode 100644 drivers/watchdog/meson_gxbb_wdt.c
> 
> -- 
> 2.7.0
> 

This patches have been added to linux-watchdog-next.

Kind regards,
Wim.

      parent reply	other threads:[~2016-07-17 20:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-10  9:11 [PATCH v3 0/3] watchdog: Add Amlogic Meson GXBB Watchdog Timer driver Neil Armstrong
2016-07-10  9:11 ` [PATCH v3 1/3] watchdog: Add Meson GXBB Watchdog Driver Neil Armstrong
2016-07-10 16:02   ` Guenter Roeck
2016-07-10  9:11 ` [PATCH v3 2/3] dt-bindings: watchdog: Add Meson GXBB Watchdog bindings Neil Armstrong
2016-07-10 16:02   ` Guenter Roeck
2016-07-10  9:11 ` [PATCH v3 3/3] ARM64: dts: amlogic: meson-gxbb: Add watchdog node Neil Armstrong
2016-07-10 16:03   ` Guenter Roeck
2016-07-12  4:12     ` Kevin Hilman
2016-08-04  0:27       ` Kevin Hilman
2016-08-04  0:29         ` Kevin Hilman
2016-08-15 20:40           ` Kevin Hilman
2016-08-16  1:51             ` Guenter Roeck
2016-08-16 13:10               ` Kevin Hilman
2016-07-17 20:22 ` Wim Van Sebroeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160717202235.GD916@spo001.leaseweb.nl \
    --to=wim@iguana.be \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=narmstrong@baylibre.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).