From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751543AbcGUGmu (ORCPT ); Thu, 21 Jul 2016 02:42:50 -0400 Received: from leo.clearchain.com ([199.73.29.74]:22343 "EHLO mail.clearchain.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750884AbcGUGmq (ORCPT ); Thu, 21 Jul 2016 02:42:46 -0400 Date: Thu, 21 Jul 2016 16:42:41 +1000 From: Peter Hutterer To: Pavel Machek Cc: Dmitry Torokhov , Michael Welling , kernel list , linux-input@vger.kernel.org, pali.rohar@gmail.com, sre@kernel.org, aaro.koskinen@iki.fi, ivo.g.dimitrov.75@gmail.com, patrikbachan@gmail.com, serge@hallyn.com Subject: Re: v4.1 to v4.7: regression in tsc2005 driver Message-ID: <20160721064241.GA31008@jelly> References: <20160717182445.GA20058@deathstar> <20160717184209.GA30119@amd> <20160717185134.GA20462@deathstar> <20160717200339.GA29562@amd> <20160717225636.GB20462@deathstar> <20160719235120.GD19250@dtor-ws> <20160720062558.GA3792@amd> <20160720162356.GA25655@dtor-ws> <20160720214736.GA4321@jelly> <20160721063234.GA14200@amd> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <20160721063234.GA14200@amd> User-Agent: Mutt/1.6.1 (2016-04-27) X-Greylist: Sender IP whitelisted, not delayed by milter-greylist-4.4.3 (mail.clearchain.com [127.0.0.1]); Thu, 21 Jul 2016 16:14:37 +0930 (CST) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, Jul 21, 2016 at 08:32:34AM +0200, Pavel Machek wrote: > Hi! > > > > In the mean time you can adjust the name or use XID instead. > > > > X has partially fixed this a few years ago. All input drivers (that > > matter) export a Device Node property that sets the device node for each > > device. > > > > $ xinput list-props "SynPS/2 Synaptics TouchPad" | grep "Device Node" > > Device Node (261): "/dev/input/event4" > > > > Based on that you can get the udev device and work your way into any of the > > sysfs tree. Or do whatever else you want. > > > > But other than that there isn't anything in X to fix. xinput is primarily a > > debugging tool and it does name resolution for convenience. But it's not a > > tool for complex configurations. It does exactly what it needs to do, if you > > need something that's more complicated and relies on information not > > available to the X device itself then you'll need to write a custom tool > > that does what you need. sorry. > > Ok.. so out of the box, touchscreen is "upside down" and miscalibrated > on n900. So I need to run > > xinput --set-prop --type=float 8 115 1.10 0.00 -0.05 0.00 1.18 -0.10 0.00 0.00 1.00 > xinput --set-prop --type=int 8 249 0 1 > > (or equivalent with names) so that I can use the touchscreen. (And > that's quite important -- X is somehow unusable without pointing > device). > > If xinput is not the right solution, what is the right solution? if it's reliably miscalibrated (i.e. the numbers don't change), use an xorg.conf snippet. If it needs some run-time changes add the hooks to whatever does the calibration. the X api itself is trivial, you can lift it from xinput. fwiw, you don't need to specify the type, in fact it's better not to because then libinput will just pick the right type anyway (or complain in case of mismatch). Cheers, Peter