linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mathieu OTHACEHE <m.othacehe@gmail.com>
To: johan@kernel.org, gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
	Mathieu OTHACEHE <m.othacehe@gmail.com>
Subject: [PATCH v2 04/22] usb: serial: ti_usb_3410_5052: Remove useless NULL-testing
Date: Tue, 26 Jul 2016 19:59:44 +0200	[thread overview]
Message-ID: <20160726180002.2398-5-m.othacehe@gmail.com> (raw)
In-Reply-To: <20160726180002.2398-1-m.othacehe@gmail.com>

It is useless to check the return of usb_get_serial_port_data.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index b694d69..c8ed3f9 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -653,9 +653,6 @@ static int ti_open(struct tty_struct *tty, struct usb_serial_port *port)
 			 TI_PIPE_TIMEOUT_ENABLE |
 			 (TI_TRANSFER_TIMEOUT << 2));
 
-	if (tport == NULL)
-		return -ENODEV;
-
 	dev = port->serial->dev;
 	tdev = tport->tp_tdev;
 
@@ -784,8 +781,6 @@ static void ti_close(struct usb_serial_port *port)
 
 	tdev = usb_get_serial_data(port->serial);
 	tport = usb_get_serial_port_data(port);
-	if (tdev == NULL || tport == NULL)
-		return;
 
 	tport->tp_is_open = 0;
 
@@ -827,7 +822,7 @@ static int ti_write(struct tty_struct *tty, struct usb_serial_port *port,
 		return 0;
 	}
 
-	if (tport == NULL || !tport->tp_is_open)
+	if (!tport->tp_is_open)
 		return -ENODEV;
 
 	count = kfifo_in_locked(&port->write_fifo, data, count,
@@ -845,9 +840,6 @@ static int ti_write_room(struct tty_struct *tty)
 	int room = 0;
 	unsigned long flags;
 
-	if (tport == NULL)
-		return 0;
-
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	room = kfifo_avail(&port->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
@@ -864,9 +856,6 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
 	int chars = 0;
 	unsigned long flags;
 
-	if (tport == NULL)
-		return 0;
-
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	chars = kfifo_len(&port->write_fifo);
 	spin_unlock_irqrestore(&tport->tp_lock, flags);
@@ -893,9 +882,6 @@ static void ti_throttle(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 
-	if (tport == NULL)
-		return;
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty))
 		ti_stop_read(tport, tty);
 
@@ -908,9 +894,6 @@ static void ti_unthrottle(struct tty_struct *tty)
 	struct ti_port *tport = usb_get_serial_port_data(port);
 	int status;
 
-	if (tport == NULL)
-		return;
-
 	if (I_IXOFF(tty) || C_CRTSCTS(tty)) {
 		status = ti_restart_read(tport, tty);
 		if (status)
@@ -925,9 +908,6 @@ static int ti_ioctl(struct tty_struct *tty,
 	struct usb_serial_port *port = tty->driver_data;
 	struct ti_port *tport = usb_get_serial_port_data(port);
 
-	if (tport == NULL)
-		return -ENODEV;
-
 	switch (cmd) {
 	case TIOCGSERIAL:
 		return ti_get_serial_info(tport,
@@ -966,9 +946,6 @@ static void ti_set_termios(struct tty_struct *tty,
 			old_termios->c_iflag);
 	}
 
-	if (tport == NULL)
-		return;
-
 	config = kzalloc(sizeof(*config), GFP_KERNEL);
 	if (!config)
 		return;
@@ -1089,9 +1066,6 @@ static int ti_tiocmget(struct tty_struct *tty)
 	unsigned int mcr;
 	unsigned long flags;
 
-	if (tport == NULL)
-		return -ENODEV;
-
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	msr = tport->tp_msr;
 	mcr = tport->tp_shadow_mcr;
@@ -1119,9 +1093,6 @@ static int ti_tiocmset(struct tty_struct *tty,
 	unsigned int mcr;
 	unsigned long flags;
 
-	if (tport == NULL)
-		return -ENODEV;
-
 	spin_lock_irqsave(&tport->tp_lock, flags);
 	mcr = tport->tp_shadow_mcr;
 
@@ -1152,9 +1123,6 @@ static void ti_break(struct tty_struct *tty, int break_state)
 
 	dev_dbg(&port->dev, "%s - state = %d\n", __func__, break_state);
 
-	if (tport == NULL)
-		return;
-
 	status = ti_write_byte(port, tport->tp_tdev,
 		tport->tp_uart_base_addr + TI_UART_OFFSET_LCR,
 		TI_LCR_BREAK, break_state == -1 ? TI_LCR_BREAK : 0);
-- 
2.9.0

  parent reply	other threads:[~2016-07-26 18:08 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-26 17:59 [PATCH v2 00/22] usb: serial: ti_usb_3410_5052: clean driver Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 01/22] usb: serial: ti_usb_3410_5052: Do not use __uX types Mathieu OTHACEHE
2016-08-23  7:44   ` Johan Hovold
2016-07-26 17:59 ` [PATCH v2 02/22] usb: serial: ti_usb_3410_5052: Remove useless dev_dbg messages Mathieu OTHACEHE
2016-08-23  7:52   ` Johan Hovold
2016-07-26 17:59 ` [PATCH v2 03/22] usb: serial: ti_usb_3410_5052: Use kzalloc instead of kmalloc Mathieu OTHACEHE
2016-07-27  8:09   ` Oliver Neukum
2016-07-27 12:46     ` Mathieu OTHACEHE
2016-08-23  7:54       ` Johan Hovold
2016-07-27 11:21   ` Sergei Shtylyov
2016-07-26 17:59 ` Mathieu OTHACEHE [this message]
2016-08-23  8:04   ` [PATCH v2 04/22] usb: serial: ti_usb_3410_5052: Remove useless NULL-testing Johan Hovold
2016-07-26 17:59 ` [PATCH v2 05/22] usb: serial: ti_usb_3410_5052: Use C_X macros instead of c_cflag manipulation Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 06/22] usb: serial: ti_usb_3410_5052: Remove unused variables Mathieu OTHACEHE
2016-08-23  8:15   ` Johan Hovold
2016-07-26 17:59 ` [PATCH v2 07/22] usb: serial: ti_usb_3410_5052: Use macros instead of magic values Mathieu OTHACEHE
2016-08-23  8:19   ` Johan Hovold
2016-07-26 17:59 ` [PATCH v2 08/22] usb: serial: ti_usb_3410_5052: Remove in_sync and out_sync functions Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 09/22] usb: serial: ti_usb_3410_5052: Remove useless tty_wakeup Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 10/22] usb: serial: ti_usb_3410_5052: Change ti_write_byte function arguments Mathieu OTHACEHE
2016-07-27  8:13   ` Oliver Neukum
2016-07-27 16:08     ` Mathieu OTHACEHE
2016-07-27 19:10       ` Oliver Neukum
2016-07-26 17:59 ` [PATCH v2 11/22] usb: serial: ti_usb_3410_5052: Do not modify interrupt context Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 12/22] usb: serial: ti_usb_3410_5052: Remove usb_serial pointer in ti_port Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 13/22] usb: serial: ti_usb_3410_5052: Change ti_get/set_serial_info function arguments Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 14/22] usb: serial: ti_usb_3410_5052: Do not set shadow mcr in open callback Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 15/22] usb: serial: ti_usb_3410_5052: Check old_termios parameter in set_termios Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 16/22] usb: serial: ti_usb_3410_5052: Raise DTR and RTS flags if speed is not null anymore Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 17/22] usb: serial: ti_usb_3410_5052: Fix firmware downloading Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 18/22] usb: serial: ti_usb_3410_5052: Standardize debug and error messages Mathieu OTHACEHE
2016-07-26 17:59 ` [PATCH v2 19/22] usb: serial: ti_usb_3410_5052: Use variables for vendor and product Mathieu OTHACEHE
2016-07-26 18:00 ` [PATCH v2 20/22] usb: serial: ti_usb_3410_5052: Set shadow msr before waking up waiters Mathieu OTHACEHE
2016-07-26 18:00 ` [PATCH v2 21/22] usb: serial: ti_usb_3410_5052: Add CMSPAR support Mathieu OTHACEHE
2016-07-26 18:00 ` [PATCH v2 22/22] usb: serial: ti_usb_3410_5052: Fix indentation problems Mathieu OTHACEHE

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160726180002.2398-5-m.othacehe@gmail.com \
    --to=m.othacehe@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).