linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: codekipper@gmail.com
To: maxime.ripard@free-electrons.com
Cc: linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com, lgirdwood@gmail.com,
	broonie@kernel.org, linux-kernel@vger.kernel.org,
	alsa-devel@alsa-project.org, be17068@iperbole.bo.it,
	Marcus Cooper <codekipper@gmail.com>
Subject: [PATCH 2/2] ASoC: sunxi: compatibility for sun6i to SPDIF
Date: Sat, 30 Jul 2016 16:27:16 +0200	[thread overview]
Message-ID: <20160730142716.29377-3-codekipper@gmail.com> (raw)
In-Reply-To: <20160730142716.29377-1-codekipper@gmail.com>

From: Marcus Cooper <codekipper@gmail.com>

The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its
reset is controlled via a separate reset controller.

The DMA also complains when the maxburst is set to 4 so it's been adjusted
to 8 which suites both the older and newer SoCs.

Signed-off-by: Marcus Cooper <codekipper@gmail.com>
---
 sound/soc/sunxi/sun4i-spdif.c | 17 ++++++++++++++++-
 1 file changed, 16 insertions(+), 1 deletion(-)

diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 0b04fb0..88fbb3a 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -29,6 +29,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/reset.h>
 #include <sound/dmaengine_pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
@@ -162,6 +163,7 @@ struct sun4i_spdif_dev {
 	struct platform_device *pdev;
 	struct clk *spdif_clk;
 	struct clk *apb_clk;
+	struct reset_control *rst;
 	struct snd_soc_dai_driver cpu_dai_drv;
 	struct regmap *regmap;
 	struct snd_dmaengine_dai_dma_data dma_params_tx;
@@ -411,6 +413,7 @@ static const struct snd_soc_dapm_route dit_routes[] = {
 
 static const struct of_device_id sun4i_spdif_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-spdif", },
+	{ .compatible = "allwinner,sun6i-a31-spdif", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
@@ -482,11 +485,23 @@ static int sun4i_spdif_probe(struct platform_device *pdev)
 	}
 
 	host->dma_params_tx.addr = res->start + SUN4I_SPDIF_TXFIFO;
-	host->dma_params_tx.maxburst = 4;
+	host->dma_params_tx.maxburst = 8;
 	host->dma_params_tx.addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
 
 	platform_set_drvdata(pdev, host);
 
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "allwinner,sun6i-a31-spdif")) {
+		host->rst = devm_reset_control_get_optional(&pdev->dev, NULL);
+		if (IS_ERR(host->rst) && PTR_ERR(host->rst) == -EPROBE_DEFER) {
+			ret = -EPROBE_DEFER;
+			dev_err(&pdev->dev, "Failed to get reset: %d\n", ret);
+			goto err_disable_apb_clk;
+		}
+		if (!IS_ERR(host->rst))
+			reset_control_deassert(host->rst);
+	}
+
 	ret = devm_snd_soc_register_component(&pdev->dev,
 				&sun4i_spdif_component, &sun4i_spdif_dai, 1);
 	if (ret)
-- 
2.9.2

  parent reply	other threads:[~2016-07-30 14:27 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-30 14:27 [PATCH 0/2] ASoC: Extended SPDIF support to Allwinner A31 SoCs codekipper
2016-07-30 14:27 ` [PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF codekipper
2016-07-30 15:17   ` Maxime Ripard
2016-07-30 15:34     ` Code Kipper
2016-07-30 15:40       ` Maxime Ripard
2016-07-30 14:27 ` codekipper [this message]
2016-07-30 14:40   ` [linux-sunxi] [PATCH 2/2] ASoC: sunxi: compatibility " Julian Calaby
2016-07-30 15:21     ` Maxime Ripard
2016-07-30 15:19   ` Maxime Ripard
     [not found]   ` <170941469890365@web9j.yandex.ru>
2016-07-30 15:20     ` maxime.ripard
2016-08-01 13:39       ` [linux-sunxi] " Chen-Yu Tsai
2016-08-22 16:04         ` Maxime Ripard
2016-08-12 12:29   ` Applied "ASoC: sunxi: compatibility for sun6i to SPDIF" to the asoc tree Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160730142716.29377-3-codekipper@gmail.com \
    --to=codekipper@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=be17068@iperbole.bo.it \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).