From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753784AbcHANyr (ORCPT ); Mon, 1 Aug 2016 09:54:47 -0400 Received: from mx2.suse.de ([195.135.220.15]:34520 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752038AbcHANyJ (ORCPT ); Mon, 1 Aug 2016 09:54:09 -0400 Date: Mon, 1 Aug 2016 15:33:52 +0200 From: Jean Delvare To: Benjamin Tissoires Cc: Wolfram Sang , Dmitry Torokhov , Andrew Duggan , Christopher Heiny , linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v9 1/2] i2c: i801: add support of Host Notify Message-ID: <20160801153352.44943aae@endymion> In-Reply-To: <20160728094457.GN19383@mail.corp.redhat.com> References: <1466779189-8455-1-git-send-email-benjamin.tissoires@redhat.com> <20160718161245.5c744879@endymion> <20160728094457.GN19383@mail.corp.redhat.com> Organization: SUSE Linux X-Mailer: Claws Mail 3.12.0 (GTK+ 2.24.30; x86_64-suse-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Thu, 28 Jul 2016 11:44:57 +0200, Benjamin Tissoires wrote: > On Jul 18 2016 or thereabouts, Jean Delvare wrote: > > On Fri, 24 Jun 2016 16:39:49 +0200, Benjamin Tissoires wrote: > > > The i801 chip can handle the Host Notify feature since ICH 3 as mentioned > > > in http://www.intel.com/content/dam/doc/datasheet/82801ca-io-controller-hub-3-datasheet.pdf > > > > > > Enable the functionality unconditionally and propagate the alert > > > on each notification. > > > > > > With a T440s and a Synaptics touchpad that implements Host Notify, the > > > payload data is always 0x0000, so I am not sure if the device actually > > > sends the payload or if there is a problem regarding the implementation. > > > > Out of curiosity, does it work on at least one machine? > > I have tested the T440, t450 and t460 (3 different generation of Intel > processor), and none seems to be working. The Synaptics touchpad used is > mostly the same, so maybe that's a device issue. May I ask why you are pushing the code upstream then, if it has no known (working) user? -- Jean Delvare SUSE L3 Support