linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alex Williamson <alex.williamson@redhat.com>
To: alex.williamson@redhat.com
Cc: eric.auger@redhat.com, linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Subject: [PATCH] vfio/pci: Fix NULL pointer oops in error interrupt setup handling
Date: Tue, 02 Aug 2016 14:00:05 -0600	[thread overview]
Message-ID: <20160802195924.18621.26365.stgit@gimli.home> (raw)

There are multiple cases in vfio_pci_set_ctx_trigger_single() where
we assume we can safely read from our data pointer without actually
checking whether the user has passed any data via the count field.
VFIO_IRQ_SET_DATA_NONE in particular is entirely broken since we
attempt to pull an int32_t file descriptor out before even checking
the data type.  The other data types assume the data pointer contains
one element of their type as well.

In part this is good news because we were previously restricted from
doing much sanitization of parameters because it was missed in the
past and we didn't want to break existing users.  Clearly DATA_NONE
is completely broken, so it must not have any users and we can fix
it up completely.  For DATA_BOOL and DATA_EVENTFD, we'll just
protect ourselves, returning error when count is zero since we
previously would have oopsed.

Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Chris Thompson <the_cartographer@hotmail.com>
Cc: stable@vger.kernel.org
---
 drivers/vfio/pci/vfio_pci_intrs.c |   85 +++++++++++++++++++++----------------
 1 file changed, 49 insertions(+), 36 deletions(-)

diff --git a/drivers/vfio/pci/vfio_pci_intrs.c b/drivers/vfio/pci/vfio_pci_intrs.c
index 15ecfc9..152b438 100644
--- a/drivers/vfio/pci/vfio_pci_intrs.c
+++ b/drivers/vfio/pci/vfio_pci_intrs.c
@@ -564,67 +564,80 @@ static int vfio_pci_set_msi_trigger(struct vfio_pci_device *vdev,
 }
 
 static int vfio_pci_set_ctx_trigger_single(struct eventfd_ctx **ctx,
-					   uint32_t flags, void *data)
+					   unsigned int count, uint32_t flags,
+					   void *data)
 {
-	int32_t fd = *(int32_t *)data;
-
-	if (!(flags & VFIO_IRQ_SET_DATA_TYPE_MASK))
-		return -EINVAL;
-
 	/* DATA_NONE/DATA_BOOL enables loopback testing */
 	if (flags & VFIO_IRQ_SET_DATA_NONE) {
-		if (*ctx)
-			eventfd_signal(*ctx, 1);
-		return 0;
+		if (*ctx) {
+			if (count) {
+				eventfd_signal(*ctx, 1);
+			} else {
+				eventfd_ctx_put(*ctx);
+				*ctx = NULL;
+			}
+			return 0;
+		}
 	} else if (flags & VFIO_IRQ_SET_DATA_BOOL) {
-		uint8_t trigger = *(uint8_t *)data;
+		uint8_t trigger;
+
+		if (!count)
+			return -EINVAL;
+
+		trigger = *(uint8_t *)data;
 		if (trigger && *ctx)
 			eventfd_signal(*ctx, 1);
-		return 0;
-	}
 
-	/* Handle SET_DATA_EVENTFD */
-	if (fd == -1) {
-		if (*ctx)
-			eventfd_ctx_put(*ctx);
-		*ctx = NULL;
 		return 0;
-	} else if (fd >= 0) {
-		struct eventfd_ctx *efdctx;
-		efdctx = eventfd_ctx_fdget(fd);
-		if (IS_ERR(efdctx))
-			return PTR_ERR(efdctx);
-		if (*ctx)
-			eventfd_ctx_put(*ctx);
-		*ctx = efdctx;
+	} else if (flags & VFIO_IRQ_SET_DATA_EVENTFD) {
+		int32_t fd;
+
+		if (!count)
+			return -EINVAL;
+
+		fd = *(int32_t *)data;
+		if (fd == -1) {
+			if (*ctx)
+				eventfd_ctx_put(*ctx);
+			*ctx = NULL;
+		} else if (fd >= 0) {
+			struct eventfd_ctx *efdctx;
+
+			efdctx = eventfd_ctx_fdget(fd);
+			if (IS_ERR(efdctx))
+				return PTR_ERR(efdctx);
+
+			if (*ctx)
+				eventfd_ctx_put(*ctx);
+
+			*ctx = efdctx;
+		}
 		return 0;
-	} else
-		return -EINVAL;
+	}
+
+	return -EINVAL;
 }
 
 static int vfio_pci_set_err_trigger(struct vfio_pci_device *vdev,
 				    unsigned index, unsigned start,
 				    unsigned count, uint32_t flags, void *data)
 {
-	if (index != VFIO_PCI_ERR_IRQ_INDEX)
+	if (index != VFIO_PCI_ERR_IRQ_INDEX || start != 0 || count > 1)
 		return -EINVAL;
 
-	/*
-	 * We should sanitize start & count, but that wasn't caught
-	 * originally, so this IRQ index must forever ignore them :-(
-	 */
-
-	return vfio_pci_set_ctx_trigger_single(&vdev->err_trigger, flags, data);
+	return vfio_pci_set_ctx_trigger_single(&vdev->err_trigger,
+					       count, flags, data);
 }
 
 static int vfio_pci_set_req_trigger(struct vfio_pci_device *vdev,
 				    unsigned index, unsigned start,
 				    unsigned count, uint32_t flags, void *data)
 {
-	if (index != VFIO_PCI_REQ_IRQ_INDEX || start != 0 || count != 1)
+	if (index != VFIO_PCI_REQ_IRQ_INDEX || start != 0 || count > 1)
 		return -EINVAL;
 
-	return vfio_pci_set_ctx_trigger_single(&vdev->req_trigger, flags, data);
+	return vfio_pci_set_ctx_trigger_single(&vdev->req_trigger,
+					       count, flags, data);
 }
 
 int vfio_pci_set_irqs_ioctl(struct vfio_pci_device *vdev, uint32_t flags,

             reply	other threads:[~2016-08-02 20:00 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-02 20:00 Alex Williamson [this message]
2016-08-03 13:06 ` [PATCH] vfio/pci: Fix NULL pointer oops in error interrupt setup handling Auger Eric

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160802195924.18621.26365.stgit@gimli.home \
    --to=alex.williamson@redhat.com \
    --cc=eric.auger@redhat.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).