From: Andre Przywara <andre.przywara@arm.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Chen-Yu Tsai <wens@csie.org>
Cc: linux-sunxi@googlegroups.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org
Subject: [PATCH v4 7/7] arm64: dts: add BananaPi M64 support
Date: Mon, 8 Aug 2016 18:21:49 +0100 [thread overview]
Message-ID: <20160808172149.30861-8-andre.przywara@arm.com> (raw)
In-Reply-To: <20160808172149.30861-1-andre.przywara@arm.com>
The BananaPi M64 is a single board computer with an Allwinner A64 SoC.
In addition to the usual suspects it contains Gigabit Ethernet, 2GB RAM,
an eMMC and a WiFi chip (which are not yet supported by this patch).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
arch/arm64/boot/dts/allwinner/Makefile | 1 +
.../boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 74 ++++++++++++++++++++++
2 files changed, 75 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 1e29a5a..51ecb04 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -1,4 +1,5 @@
dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
new file mode 100644
index 0000000..bc0ed4c
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
@@ -0,0 +1,74 @@
+/*
+ * Copyright (c) 2016 ARM Ltd.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "sun50i-a64.dtsi"
+
+/ {
+ model = "BananaPi-M64";
+ compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ aliases {
+ serial0 = &uart0;
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+};
--
2.9.0
prev parent reply other threads:[~2016-08-08 17:21 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-08 17:21 [PATCH v4 0/7] arm64: Allwinner A64 support Andre Przywara
2016-08-08 17:21 ` [PATCH v4 1/7] arm64: sunxi: Kconfig: add essential pinctrl driver Andre Przywara
2016-08-23 19:37 ` Maxime Ripard
2016-08-08 17:21 ` [PATCH v4 2/7] DT: clk: sunxi: add binding doc for the multi-bus-gates clock Andre Przywara
2016-08-08 17:21 ` [PATCH v4 3/7] clk: sunxi: add generic multi-parent bus clock gates driver Andre Przywara
2016-08-08 18:15 ` Jean-Francois Moine
2016-08-09 10:02 ` [linux-sunxi] " Chen-Yu Tsai
2016-08-09 17:27 ` Jean-Francois Moine
2016-08-23 20:00 ` Maxime Ripard
2016-08-08 17:21 ` [PATCH v4 4/7] of: add vendor prefix for Pine64 Andre Przywara
2016-08-08 17:21 ` [PATCH v4 5/7] arm64: dts: add Allwinner A64 SoC .dtsi Andre Przywara
2016-08-10 20:00 ` Rob Herring
2016-08-23 20:03 ` Maxime Ripard
2016-08-08 17:21 ` [PATCH v4 6/7] arm64: dts: add Pine64 support Andre Przywara
2016-08-24 18:24 ` Maxime Ripard
2016-08-08 17:21 ` Andre Przywara [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160808172149.30861-8-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@free-electrons.com \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).