From: Andrew Jeffery <andrew@aj.id.au>
To: Linus Walleij <linus.walleij@linaro.org>, Joel Stanley <joel@jms.id.au>
Cc: Alexandre Courbot <gnurou@gmail.com>,
Mark Rutland <mark.rutland@arm.com>,
Rob Herring <robh+dt@kernel.org>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Jeremy Kerr <jk@ozlabs.org>,
linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, Andrew Jeffery <andrew@aj.id.au>
Subject: [PATCH v2 0/8] aspeed: Add pinctrl and gpio drivers
Date: Fri, 19 Aug 2016 22:14:06 +0930 [thread overview]
Message-ID: <20160819124414.24242-1-andrew@aj.id.au> (raw)
Hi all,
Here's v2 of the Aspeed pinctrl and gpio driver patches, which aims to address
the review comments on v1:
https://lkml.org/lkml/2016/7/20/69
There are some additional changes which are either to fix bugs with some signal
descriptor values or to support additional mux functions. Further, the series
has been split in two, into driver and SoC changes.
The combined series has been tested with both the AST2400 (g4) and AST2500 (g5)
SoCs on OpenPOWER Palmetto and Aspeed AST2500 EVB machines respectively, and
similarly in QEMU with the palmetto-bmc and ast2500-evb machines[1].
Cheers,
Andrew
[1] https://lists.gnu.org/archive/html/qemu-arm/2016-08/msg00019.html
Since v1:
* Split the series in two: driver and SoC patches.
* Update devicetree bindings documentation
* Add documentation for aspeed pinctrl core functions
* Fix bugs in existing signal descriptors
* Add a number of pin and mux function declarations
* Provide debug information on unexpected conditions
---
Andrew Jeffery (7):
MAINTAINERS: Add glob for Aspeed devicetree bindings
syscon: dt-bindings: Add documentation for Aspeed system control units
pinctrl: dt-bindings: Add documentation for Aspeed pin controllers
gpio: dt-bindings: Add documentation for Aspeed GPIO controllers
pinctrl: Add core support for Aspeed SoCs
pinctrl: Add pinctrl-aspeed-g4 driver
pinctrl: Add pinctrl-aspeed-g5 driver
Joel Stanley (1):
gpio: Add Aspeed driver
.../devicetree/bindings/gpio/gpio-aspeed.txt | 34 +
.../devicetree/bindings/mfd/aspeed-scu.txt | 18 +
.../devicetree/bindings/pinctrl/pinctrl-aspeed.txt | 65 ++
MAINTAINERS | 2 +
drivers/gpio/Kconfig | 7 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-aspeed.c | 457 ++++++++
drivers/pinctrl/Kconfig | 1 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/aspeed/Kconfig | 24 +
drivers/pinctrl/aspeed/Makefile | 6 +
drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c | 1231 ++++++++++++++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c | 808 +++++++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed.c | 501 ++++++++
drivers/pinctrl/aspeed/pinctrl-aspeed.h | 569 +++++++++
15 files changed, 3725 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
create mode 100644 Documentation/devicetree/bindings/mfd/aspeed-scu.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
create mode 100644 drivers/gpio/gpio-aspeed.c
create mode 100644 drivers/pinctrl/aspeed/Kconfig
create mode 100644 drivers/pinctrl/aspeed/Makefile
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed-g4.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed-g5.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed.c
create mode 100644 drivers/pinctrl/aspeed/pinctrl-aspeed.h
--
2.9.3
next reply other threads:[~2016-08-19 12:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-19 12:44 Andrew Jeffery [this message]
2016-08-19 12:44 ` [PATCH v2 1/8] MAINTAINERS: Add glob for Aspeed devicetree bindings Andrew Jeffery
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 2/8] syscon: dt-bindings: Add documentation for Aspeed system control units Andrew Jeffery
2016-08-23 17:19 ` Rob Herring
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 3/8] pinctrl: dt-bindings: Add documentation for Aspeed pin controllers Andrew Jeffery
2016-08-23 17:23 ` Rob Herring
2016-08-24 0:06 ` Andrew Jeffery
2016-08-30 6:05 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 4/8] gpio: dt-bindings: Add documentation for Aspeed GPIO controllers Andrew Jeffery
2016-08-19 14:36 ` Rob Herring
2016-08-22 0:16 ` Andrew Jeffery
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 5/8] pinctrl: Add core support for Aspeed SoCs Andrew Jeffery
2016-08-22 13:45 ` Linus Walleij
2016-08-23 2:30 ` Andrew Jeffery
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 6/8] pinctrl: Add pinctrl-aspeed-g4 driver Andrew Jeffery
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 7/8] pinctrl: Add pinctrl-aspeed-g5 driver Andrew Jeffery
2016-08-30 6:04 ` Joel Stanley
2016-08-19 12:44 ` [PATCH v2 8/8] gpio: Add Aspeed driver Andrew Jeffery
2016-08-22 13:48 ` Linus Walleij
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160819124414.24242-1-andrew@aj.id.au \
--to=andrew@aj.id.au \
--cc=benh@kernel.crashing.org \
--cc=devicetree@vger.kernel.org \
--cc=gnurou@gmail.com \
--cc=jk@ozlabs.org \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).