From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: "Andrew F. Davis" <afd@ti.com>
Cc: Vignesh R <vigneshr@ti.com>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Tony Lindgren <tony@atomide.com>,
Russell King <linux@armlinux.org.uk>,
Arnd Bergmann <arnd@arndb.de>,
Daniel Hung-yu Wu <hywu@google.com>,
Grant Grundler <grundler@chromium.org>,
S Twiss <stwiss.opensource@diasemi.com>,
Moritz Fischer <moritz.fischer@ettus.com>,
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>,
John Stultz <john.stultz@linaro.org>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines
Date: Tue, 23 Aug 2016 13:01:46 -0700 [thread overview]
Message-ID: <20160823200146.GB6712@dtor-ws> (raw)
In-Reply-To: <949d92f3-4510-ada5-d3d6-a29544465fd6@ti.com>
On Tue, Aug 23, 2016 at 10:27:59AM -0500, Andrew F. Davis wrote:
> On 08/23/2016 01:16 AM, Vignesh R wrote:
> > Add a driver to read group of GPIO lines and provide its status as a
> > numerical value as input event to the system. This will help in
> > intefacing devices, that can be connected over GPIOs, that provide input
> > to the system by driving GPIO lines connected to them like a rotary dial
> > or a switch.
> >
> > For example, a rotary switch can be connected to four GPIO lines. The
> > status of the GPIO lines reflect the actual position of the rotary
> > switch dial. For example, if dial points to 9, then the four GPIO lines
> > connected to the switch will read HLLH(0b'1001 = 9). This value
> > can be reported as an ABS_* event to the input subsystem.
> >
> > Signed-off-by: Vignesh R <vigneshr@ti.com>
> > Acked-by: Rob Herring <robh@kernel.org>
> > ---
> >
> > v2: Use decoder,max-value instead of gpio-decoder,max-value.
> >
> > .../devicetree/bindings/input/gpio-decoder.txt | 23 ++++
> > drivers/input/misc/Kconfig | 12 ++
> > drivers/input/misc/Makefile | 1 +
> > drivers/input/misc/gpio_decoder.c | 130 +++++++++++++++++++++
> > 4 files changed, 166 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/input/gpio-decoder.txt
> > create mode 100644 drivers/input/misc/gpio_decoder.c
> >
> > diff --git a/Documentation/devicetree/bindings/input/gpio-decoder.txt b/Documentation/devicetree/bindings/input/gpio-decoder.txt
> > new file mode 100644
> > index 000000000000..f27f083a9075
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/input/gpio-decoder.txt
> > @@ -0,0 +1,23 @@
> > +* GPIO Decoder DT bindings
> > +
> > +Required Properties:
> > +- compatible: should be "gpio-decoder"
> > +- gpios: a spec of gpios (atleast two) to be decoded to a number with
>
> ^^ two words
>
> > + first entry representing the MSB.
> > +
> > +Optional Properties:
> > +- decoder,max-value: Maximum possible value that can be reported by
> > + the gpios.
> > +- linux,axis: the input subsystem axis to map to (ABS_X/ABS_Y).
> > + Defaults to 0 (ABS_X).
> > +
> > +Example:
> > + gpio-decoder0 {
> > + compatible = "gpio-decoder";
> > + gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
> > + <&pca9536 2 GPIO_ACTIVE_HIGH>,
> > + <&pca9536 1 GPIO_ACTIVE_HIGH>,
> > + <&pca9536 0 GPIO_ACTIVE_HIGH>;
> > + linux,axis = <0>; /* ABS_X */
> > + decoder,max-value = <9>;
> > + };
> > diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> > index efb0ca871327..c44513cac3b7 100644
> > --- a/drivers/input/misc/Kconfig
> > +++ b/drivers/input/misc/Kconfig
> > @@ -292,6 +292,18 @@ config INPUT_GPIO_TILT_POLLED
> > To compile this driver as a module, choose M here: the
> > module will be called gpio_tilt_polled.
> >
> > +config INPUT_GPIO_DECODER
> > + tristate "Polled GPIO Decoder Input driver"
> > + depends on GPIOLIB && OF
> > + select INPUT_POLLDEV
> > + help
> > + Say Y here if you want driver to read status of multiple GPIO
> > + lines and report the encoded value as an absolute integer to
> > + input subsystem.
> > +
> > + To compile this driver as a module, choose M here: the module
> > + will will be called gpio_decoder.
> > +
> > config INPUT_IXP4XX_BEEPER
> > tristate "IXP4XX Beeper support"
> > depends on ARCH_IXP4XX
> > diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> > index 6a1e5e20fc1c..0b6d025f0487 100644
> > --- a/drivers/input/misc/Makefile
> > +++ b/drivers/input/misc/Makefile
> > @@ -35,6 +35,7 @@ obj-$(CONFIG_INPUT_DRV2667_HAPTICS) += drv2667.o
> > obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
> > obj-$(CONFIG_INPUT_GPIO_BEEPER) += gpio-beeper.o
> > obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
> > +obj-$(CONFIG_INPUT_GPIO_DECODER) += gpio_decoder.o
> > obj-$(CONFIG_INPUT_HISI_POWERKEY) += hisi_powerkey.o
> > obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
> > obj-$(CONFIG_INPUT_IMS_PCU) += ims-pcu.o
> > diff --git a/drivers/input/misc/gpio_decoder.c b/drivers/input/misc/gpio_decoder.c
> > new file mode 100644
> > index 000000000000..eec0fda6f562
> > --- /dev/null
> > +++ b/drivers/input/misc/gpio_decoder.c
> > @@ -0,0 +1,130 @@
> > +/*
> > + * gpio-decoder.c
> > + *
>
> ^ the name of the file often changes without this being updated, it
> really doesn't add anything anyway, would recommend dropping it.
>
> > + * A generic driver to reads multiple gpio lines and translate the
> > + * encoded numeric value into an input event.
> > + *
> > + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> > + *
> > + * This program is free software; you can redistribute it and/or
> > + * modify it under the terms of the GNU General Public License as
> > + * published by the Free Software Foundation version 2.
> > + *
> > + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> > + * kind, whether express or implied; without even the implied warranty
> > + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/device.h>
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/input.h>
> > +#include <linux/input-polldev.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of.h>
> > +#include <linux/platform_device.h>
> > +
> > +struct gpio_decoder {
> > + struct input_polled_dev *poll_dev;
> > + struct gpio_descs *input_gpios;
> > + struct device *dev;
> > + u32 axis;
> > + u32 last_stable;
> > +};
> > +
> > +static unsigned int gpio_decoder_get_gpios_state(struct gpio_decoder
> > + *decoder)
> > +{
> > + struct gpio_descs *gpios = decoder->input_gpios;
> > + unsigned int ret = 0;
> > + int i, val;
> > +
> > + for (i = 0; i < gpios->ndescs; i++) {
> > + val = gpiod_get_value_cansleep(gpios->desc[i]);
> > + ret = ret << 1 | val;
>
> Just to be safe, could you mask val with 0x1 here.
We also want to check for negative. So I guess:
val = gpiod_get_value_cansleep(gpios->desc[i]);
if (val >= 0)
ret = (ret << 1) | !!val;
?
>
> > + }
> > +
> > + return ret;
> > +}
> > +
> > +static void gpio_decoder_poll_gpios(struct input_polled_dev *poll_dev)
> > +{
> > + struct gpio_decoder *decoder = poll_dev->private;
> > + unsigned int state = gpio_decoder_get_gpios_state(decoder);
> > +
> > + if (state != decoder->last_stable) {
> > + input_report_abs(poll_dev->input, decoder->axis, state);
> > + input_sync(poll_dev->input);
> > + decoder->last_stable = state;
> > + }
> > +}
> > +
> > +static int gpio_decoder_probe(struct platform_device *pdev)
> > +{
> > + struct device *dev = &pdev->dev;
> > + struct gpio_decoder *decoder;
> > + struct input_polled_dev *poll_dev;
> > + u32 max;
> > + int err;
> > +
> > + decoder = devm_kzalloc(dev, sizeof(struct gpio_decoder), GFP_KERNEL);
> > + if (!decoder)
> > + return -ENOMEM;
> > +
> > + device_property_read_u32(dev, "linux,axis", &decoder->axis);
> > + decoder->input_gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
> > + if (IS_ERR(decoder->input_gpios)) {
> > + dev_err(dev, "unable to acquire input gpios\n");
> > + return PTR_ERR(decoder->input_gpios);
> > + }
> > + if (decoder->input_gpios->ndescs < 2) {
> > + dev_err(dev, "not enough gpios found\n");
> > + return -EINVAL;
> > + }
> > +
> > + if (device_property_read_u32(dev, "decoder,max-value", &max))
> > + max = BIT(decoder->input_gpios->ndescs);
> > +
> > + decoder->dev = dev;
> > + poll_dev = devm_input_allocate_polled_device(decoder->dev);
> > + if (!poll_dev)
> > + return -ENOMEM;
> > +
> > + poll_dev->private = decoder;
> > + poll_dev->poll = gpio_decoder_poll_gpios;
> > + decoder->poll_dev = poll_dev;
> > +
> > + poll_dev->input->name = pdev->name;
> > + poll_dev->input->id.bustype = BUS_HOST;
> > + poll_dev->input->dev.parent = dev;
No need to set for devices allocated with
devm_input_allocate_polled_device.
> > + input_set_abs_params(poll_dev->input, decoder->axis, 0, max, 0, 1);
> > +
> > + err = input_register_polled_device(poll_dev);
> > + if (err) {
> > + dev_err(dev, "failed to register polled device\n");
> > + return err;
> > + }
> > + platform_set_drvdata(pdev, decoder);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id gpio_decoder_of_match[] = {
> > + { .compatible = "gpio-decoder", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, gpio_decoder_of_match);
> > +
> > +static struct platform_driver gpio_decoder_driver = {
> > + .probe = gpio_decoder_probe,
> > + .driver = {
> > + .name = "gpio-decoder",
> > + .of_match_table = of_match_ptr(gpio_decoder_of_match),
>
> When the struct 'gpio_decoder_of_match' is always defined (not
> conditional on OF support), then 'of_match_ptr' does nothing and can be
> dropped here.
There is nothing in this driver that makes it OF-specific. I'd leave
of_match_ptr() as is, added #ifdef CONFIG_OF guard around
gpio_decoder_of_match, and changed "depends on GPIOLIB && OF" to
"depends on GPIOLIB || COMPILE_TEST".
Thanks.
>
> > + }
> > +};
> > +module_platform_driver(gpio_decoder_driver);
> > +
> > +MODULE_DESCRIPTION("GPIO decoder input driver");
> > +MODULE_AUTHOR("Vignesh R <vigneshr@ti.com>");
> > +MODULE_LICENSE("GPL v2");
--
Dmitry
next prev parent reply other threads:[~2016-08-23 20:21 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-23 6:16 [PATCH v2 0/2] AM335x-ICE: Add support for rotary switch Vignesh R
2016-08-23 6:16 ` [PATCH v2 1/2] input: misc: Add generic input driver to read encoded GPIO lines Vignesh R
2016-08-23 15:27 ` Andrew F. Davis
2016-08-23 20:01 ` Dmitry Torokhov [this message]
2016-08-24 6:39 ` Vignesh R
2016-08-23 20:03 ` Dmitry Torokhov
2016-08-24 6:39 ` Vignesh R
2016-08-23 6:16 ` [PATCH v2 2/2] ARM: dts: am335x-icev2: Add nodes for gpio-decoder Vignesh R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160823200146.GB6712@dtor-ws \
--to=dmitry.torokhov@gmail.com \
--cc=afd@ti.com \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=grundler@chromium.org \
--cc=hywu@google.com \
--cc=john.stultz@linaro.org \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=moritz.fischer@ettus.com \
--cc=robh+dt@kernel.org \
--cc=stwiss.opensource@diasemi.com \
--cc=tony@atomide.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).