From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933442AbcH3Rgk (ORCPT ); Tue, 30 Aug 2016 13:36:40 -0400 Received: from mailapp01.imgtec.com ([195.59.15.196]:1609 "EHLO mailapp01.imgtec.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933100AbcH3Rgh (ORCPT ); Tue, 30 Aug 2016 13:36:37 -0400 From: Paul Burton To: , Ralf Baechle CC: Paul Burton , , , Rob Herring , Mark Rutland Subject: [PATCH v2 26/26] MIPS: generic: Support MIPS Boston development boards Date: Tue, 30 Aug 2016 18:29:29 +0100 Message-ID: <20160830172929.16948-27-paul.burton@imgtec.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20160830172929.16948-1-paul.burton@imgtec.com> References: <20160830172929.16948-1-paul.burton@imgtec.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.100.200.118] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add support for the MIPS Boston development board to generic kernels, which essentially amounts to: - Adding the device tree source for the MIPS Boston board. - Adding a Kconfig fragment which enables the appropriate drivers for the MIPS Boston board. With these changes in place generic kernels will support the board by default, and kernels with only the drivers needed for Boston enabled can be configured by setting BOARDS=boston during configuration. For example: $ make ARCH=mips 64r6el_defconfig BOARDS=boston Signed-off-by: Paul Burton --- Changes in v2: None arch/mips/boot/dts/Makefile | 1 + arch/mips/boot/dts/img/Makefile | 7 + arch/mips/boot/dts/img/boston.dts | 230 ++++++++++++++++++++++++++ arch/mips/configs/generic/board-boston.config | 46 ++++++ arch/mips/generic/Kconfig | 8 + arch/mips/generic/vmlinux.its.S | 25 +++ 6 files changed, 317 insertions(+) create mode 100644 arch/mips/boot/dts/img/Makefile create mode 100644 arch/mips/boot/dts/img/boston.dts create mode 100644 arch/mips/configs/generic/board-boston.config diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile index fc7a0a9..b9db492 100644 --- a/arch/mips/boot/dts/Makefile +++ b/arch/mips/boot/dts/Makefile @@ -1,5 +1,6 @@ dts-dirs += brcm dts-dirs += cavium-octeon +dts-dirs += img dts-dirs += ingenic dts-dirs += lantiq dts-dirs += mti diff --git a/arch/mips/boot/dts/img/Makefile b/arch/mips/boot/dts/img/Makefile new file mode 100644 index 0000000..ae119d3 --- /dev/null +++ b/arch/mips/boot/dts/img/Makefile @@ -0,0 +1,7 @@ +dtb-$(CONFIG_FIT_IMAGE_FDT_BOSTON) += boston.dtb + +# Force kbuild to make empty built-in.o if necessary +obj- += dummy.o + +always := $(dtb-y) +clean-files := *.dtb *.dtb.S diff --git a/arch/mips/boot/dts/img/boston.dts b/arch/mips/boot/dts/img/boston.dts new file mode 100644 index 0000000..b357376 --- /dev/null +++ b/arch/mips/boot/dts/img/boston.dts @@ -0,0 +1,230 @@ +/dts-v1/; + +#include +#include +#include +#include + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "img,boston"; + + chosen { + stdout-path = "uart0:115200"; + }; + + aliases { + uart0 = &uart0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "img,mips"; + reg = <0>; + clocks = <&clk_boston BOSTON_CLK_CPU>; + }; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + pci0: pci@10000000 { + compatible = "xlnx,axi-pcie-host-1.00.a"; + device_type = "pci"; + reg = <0x10000000 0x2000000>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + interrupt-parent = <&gic>; + interrupts = ; + + ranges = <0x02000000 0 0x40000000 + 0x40000000 0 0x40000000>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pci0_intc 0>, + <0 0 0 2 &pci0_intc 1>, + <0 0 0 3 &pci0_intc 2>, + <0 0 0 4 &pci0_intc 3>; + + pci0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pci1: pci@12000000 { + compatible = "xlnx,axi-pcie-host-1.00.a"; + device_type = "pci"; + reg = <0x12000000 0x2000000>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + interrupt-parent = <&gic>; + interrupts = ; + + ranges = <0x02000000 0 0x20000000 + 0x20000000 0 0x20000000>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pci1_intc 0>, + <0 0 0 2 &pci1_intc 1>, + <0 0 0 3 &pci1_intc 2>, + <0 0 0 4 &pci1_intc 3>; + + pci1_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + + pci2: pci@14000000 { + compatible = "xlnx,axi-pcie-host-1.00.a"; + device_type = "pci"; + reg = <0x14000000 0x2000000>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + interrupt-parent = <&gic>; + interrupts = ; + + ranges = <0x02000000 0 0x16000000 + 0x16000000 0 0x100000>; + + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pci2_intc 0>, + <0 0 0 2 &pci2_intc 1>, + <0 0 0 3 &pci2_intc 2>, + <0 0 0 4 &pci2_intc 3>; + + pci2_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + pci2_root@0,0,0 { + compatible = "pci10ee,7021"; + reg = <0x00000000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + eg20t_bridge@1,0,0 { + compatible = "pci8086,8800"; + reg = <0x00010000 0 0 0 0>; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + eg20t_mac@2,0,1 { + compatible = "pci8086,8802"; + reg = <0x00020100 0 0 0 0>; + phy-reset-gpios = <&eg20t_gpio 6 + GPIO_ACTIVE_LOW>; + }; + + eg20t_gpio: eg20t_gpio@2,0,2 { + compatible = "pci8086,8803"; + reg = <0x00020200 0 0 0 0>; + + gpio-controller; + #gpio-cells = <2>; + }; + + eg20t_i2c@2,12,2 { + compatible = "pci8086,8817"; + reg = <0x00026200 0 0 0 0>; + + #address-cells = <1>; + #size-cells = <0>; + + rtc@0x68 { + compatible = "st,m41t81s"; + reg = <0x68>; + }; + }; + }; + }; + }; + + gic: interrupt-controller@16120000 { + compatible = "mti,gic"; + reg = <0x16120000 0x20000>; + + interrupt-controller; + #interrupt-cells = <3>; + + timer { + compatible = "mti,gic-timer"; + interrupts = ; + clocks = <&clk_boston BOSTON_CLK_CPU>; + }; + }; + + cdmm@16140000 { + compatible = "mti,mips-cdmm"; + reg = <0x16140000 0x8000>; + }; + + cpc@16200000 { + compatible = "mti,mips-cpc"; + reg = <0x16200000 0x8000>; + }; + + plat_regs: system-controller@17ffd000 { + compatible = "img,boston-platform-regs", "syscon"; + reg = <0x17ffd000 0x1000>; + u-boot,dm-pre-reloc; + }; + + clk_boston: clock { + compatible = "img,boston-clock"; + #clock-cells = <1>; + regmap = <&plat_regs>; + u-boot,dm-pre-reloc; + }; + + reboot: syscon-reboot { + compatible = "syscon-reboot"; + regmap = <&plat_regs>; + offset = <0x10>; + mask = <0x10>; + }; + + uart0: uart@17ffe000 { + compatible = "ns16550a"; + reg = <0x17ffe000 0x1000>; + reg-shift = <2>; + reg-io-width = <4>; + + interrupt-parent = <&gic>; + interrupts = ; + + clocks = <&clk_boston BOSTON_CLK_SYS>; + + u-boot,dm-pre-reloc; + }; + + lcd: lcd@17fff000 { + compatible = "img,boston-lcd"; + reg = <0x17fff000 0x8>; + }; +}; diff --git a/arch/mips/configs/generic/board-boston.config b/arch/mips/configs/generic/board-boston.config new file mode 100644 index 0000000..09864a4 --- /dev/null +++ b/arch/mips/configs/generic/board-boston.config @@ -0,0 +1,46 @@ +CONFIG_FIT_IMAGE_FDT_BOSTON=y + +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SCSI=y + +CONFIG_AUXDISPLAY=y +CONFIG_IMG_ASCII_LCD=y + +CONFIG_COMMON_CLK_BOSTON=y + +CONFIG_DMADEVICES=y +CONFIG_PCH_DMA=y + +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PCH=y + +CONFIG_I2C=y +CONFIG_I2C_EG20T=y + +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PCI=y + +CONFIG_NETDEVICES=y +CONFIG_PCH_GBE=y + +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_XILINX=y + +CONFIG_PCH_PHUB=y + +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_M41T80=y + +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y + +CONFIG_SPI=y +CONFIG_SPI_TOPCLIFF_PCH=y + +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig index a606b3f..16eb939 100644 --- a/arch/mips/generic/Kconfig +++ b/arch/mips/generic/Kconfig @@ -16,4 +16,12 @@ config LEGACY_BOARD_SEAD3 Enable this to include support for booting on MIPS SEAD-3 FPGA-based development boards, which boot using a legacy boot protocol. +config FIT_IMAGE_FDT_BOSTON + bool "Include FDT for MIPS Boston boards" + help + Enable this to include the FDT for the MIPS Boston development board + from Imagination Technologies in the FIT kernel image. You should + enable this if you wish to boot on a MIPS Boston board, as it is + expected by the bootloader. + endif diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S index f67fbf1..3390e2f 100644 --- a/arch/mips/generic/vmlinux.its.S +++ b/arch/mips/generic/vmlinux.its.S @@ -29,3 +29,28 @@ }; }; }; + +#ifdef CONFIG_FIT_IMAGE_FDT_BOSTON +/ { + images { + fdt@boston { + description = "img,boston Device Tree"; + data = /incbin/("boot/dts/img/boston.dtb"); + type = "flat_dt"; + arch = "mips"; + compression = "none"; + hash@0 { + algo = "sha1"; + }; + }; + }; + + configurations { + conf@boston { + description = "Boston Linux kernel"; + kernel = "kernel@0"; + fdt = "fdt@boston"; + }; + }; +}; +#endif /* CONFIG_FIT_IMAGE_FDT_BOSTON */ -- 2.9.3