From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934362AbcIFMUJ (ORCPT ); Tue, 6 Sep 2016 08:20:09 -0400 Received: from down.free-electrons.com ([37.187.137.238]:48090 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755820AbcIFMSp (ORCPT ); Tue, 6 Sep 2016 08:18:45 -0400 From: Maxime Ripard To: Mike Turquette , Stephen Boyd , Chen-Yu Tsai Cc: Hans de Goede , Mylene Josserand , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Thomas Petazzoni , Maxime Ripard Subject: [PATCH v2 4/7] clk: sunxi-ng: Add N-class clocks support Date: Tue, 6 Sep 2016 14:18:34 +0200 Message-Id: <20160906121837.7517-5-maxime.ripard@free-electrons.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20160906121837.7517-1-maxime.ripard@free-electrons.com> References: <20160906121837.7517-1-maxime.ripard@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add support for the class with a single factor, N, being a multiplier. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- drivers/clk/sunxi-ng/Kconfig | 4 ++ drivers/clk/sunxi-ng/Makefile | 1 + drivers/clk/sunxi-ng/ccu_mult.c | 133 ++++++++++++++++++++++++++++++++++++++++ drivers/clk/sunxi-ng/ccu_mult.h | 35 +++++++++++ 4 files changed, 173 insertions(+) create mode 100644 drivers/clk/sunxi-ng/ccu_mult.c diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig index a1dee861474c..c7258779daa8 100644 --- a/drivers/clk/sunxi-ng/Kconfig +++ b/drivers/clk/sunxi-ng/Kconfig @@ -19,6 +19,10 @@ config SUNXI_CCU_GATE config SUNXI_CCU_MUX bool +config SUNXI_CCU_MULT + bool + select SUNXI_CCU_MUX + config SUNXI_CCU_PHASE bool diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile index 261438b00215..462a5f8383ed 100644 --- a/drivers/clk/sunxi-ng/Makefile +++ b/drivers/clk/sunxi-ng/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_SUNXI_CCU_DIV) += ccu_div.o obj-$(CONFIG_SUNXI_CCU_FRAC) += ccu_frac.o obj-$(CONFIG_SUNXI_CCU_GATE) += ccu_gate.o obj-$(CONFIG_SUNXI_CCU_MUX) += ccu_mux.o +obj-$(CONFIG_SUNXI_CCU_MULT) += ccu_mult.o obj-$(CONFIG_SUNXI_CCU_PHASE) += ccu_phase.o # Multi-factor clocks diff --git a/drivers/clk/sunxi-ng/ccu_mult.c b/drivers/clk/sunxi-ng/ccu_mult.c new file mode 100644 index 000000000000..119b190c0eb5 --- /dev/null +++ b/drivers/clk/sunxi-ng/ccu_mult.c @@ -0,0 +1,133 @@ +/* + * Copyright (C) 2016 Maxime Ripard + * Maxime Ripard + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include + +#include "ccu_gate.h" +#include "ccu_mult.h" + +static void ccu_mult_find_best(unsigned long parent, unsigned long rate, + unsigned int max_n, unsigned int *n) +{ + *n = rate / parent; +} + +static unsigned long ccu_mult_round_rate(struct ccu_mux_internal *mux, + unsigned long parent_rate, + unsigned long rate, + void *data) +{ + struct ccu_mult *cm = data; + unsigned int n; + + ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n); + + return parent_rate * n; +} + +static void ccu_mult_disable(struct clk_hw *hw) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_gate_helper_disable(&cm->common, cm->enable); +} + +static int ccu_mult_enable(struct clk_hw *hw) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_gate_helper_enable(&cm->common, cm->enable); +} + +static int ccu_mult_is_enabled(struct clk_hw *hw) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_gate_helper_is_enabled(&cm->common, cm->enable); +} + +static unsigned long ccu_mult_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + unsigned long val; + u32 reg; + + reg = readl(cm->common.base + cm->common.reg); + val = reg >> cm->mult.shift; + val &= (1 << cm->mult.width) - 1; + + ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1, + &parent_rate); + + return parent_rate * (val + 1); +} + +static int ccu_mult_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_mux_helper_determine_rate(&cm->common, &cm->mux, + req, ccu_mult_round_rate, cm); +} + +static int ccu_mult_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + unsigned long flags; + unsigned int n; + u32 reg; + + ccu_mux_helper_adjust_parent_for_prediv(&cm->common, &cm->mux, -1, + &parent_rate); + + ccu_mult_find_best(parent_rate, rate, 1 << cm->mult.width, &n); + + spin_lock_irqsave(cm->common.lock, flags); + + reg = readl(cm->common.base + cm->common.reg); + reg &= ~GENMASK(cm->mult.width + cm->mult.shift - 1, cm->mult.shift); + + writel(reg | ((n - 1) << cm->mult.shift), + cm->common.base + cm->common.reg); + + spin_unlock_irqrestore(cm->common.lock, flags); + + return 0; +} + +static u8 ccu_mult_get_parent(struct clk_hw *hw) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_mux_helper_get_parent(&cm->common, &cm->mux); +} + +static int ccu_mult_set_parent(struct clk_hw *hw, u8 index) +{ + struct ccu_mult *cm = hw_to_ccu_mult(hw); + + return ccu_mux_helper_set_parent(&cm->common, &cm->mux, index); +} + +const struct clk_ops ccu_mult_ops = { + .disable = ccu_mult_disable, + .enable = ccu_mult_enable, + .is_enabled = ccu_mult_is_enabled, + + .get_parent = ccu_mult_get_parent, + .set_parent = ccu_mult_set_parent, + + .determine_rate = ccu_mult_determine_rate, + .recalc_rate = ccu_mult_recalc_rate, + .set_rate = ccu_mult_set_rate, +}; diff --git a/drivers/clk/sunxi-ng/ccu_mult.h b/drivers/clk/sunxi-ng/ccu_mult.h index 609db6610880..5d2c8dc14073 100644 --- a/drivers/clk/sunxi-ng/ccu_mult.h +++ b/drivers/clk/sunxi-ng/ccu_mult.h @@ -1,6 +1,9 @@ #ifndef _CCU_MULT_H_ #define _CCU_MULT_H_ +#include "ccu_common.h" +#include "ccu_mux.h" + struct _ccu_mult { u8 shift; u8 width; @@ -12,4 +15,36 @@ struct _ccu_mult { .width = _width, \ } +struct ccu_mult { + u32 enable; + + struct _ccu_mult mult; + struct ccu_mux_internal mux; + struct ccu_common common; +}; + +#define SUNXI_CCU_N_WITH_GATE_LOCK(_struct, _name, _parent, _reg, \ + _mshift, _mwidth, _gate, _lock, \ + _flags) \ + struct ccu_mult _struct = { \ + .enable = _gate, \ + .mult = _SUNXI_CCU_MULT(_mshift, _mwidth), \ + .common = { \ + .reg = _reg, \ + .hw.init = CLK_HW_INIT(_name, \ + _parent, \ + &ccu_mult_ops, \ + _flags), \ + }, \ + } + +static inline struct ccu_mult *hw_to_ccu_mult(struct clk_hw *hw) +{ + struct ccu_common *common = hw_to_ccu_common(hw); + + return container_of(common, struct ccu_mult, common); +} + +extern const struct clk_ops ccu_mult_ops; + #endif /* _CCU_MULT_H_ */ -- 2.9.3