From: Arnd Bergmann <arnd@arndb.de>
To: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Gregory Clement <gregory.clement@free-electrons.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>
Subject: [PATCH 2/4] ARM: mvebu/orion: remove NO_IRQ check from device init
Date: Tue, 6 Sep 2016 16:06:21 +0200 [thread overview]
Message-ID: <20160906140623.2853066-2-arnd@arndb.de> (raw)
In-Reply-To: <20160906140623.2853066-1-arnd@arndb.de>
For most devices, we know in advance whether they have an
interrupt line or not, so we can avoid passing NO_IRQ and
instead split fill_resources() into two interfaces, with
only the new fill_resources_irq() function taking an irq
argument, which it then can use unconditionally.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
arch/arm/plat-orion/common.c | 52 ++++++++++++++++++++++++--------------------
1 file changed, 29 insertions(+), 23 deletions(-)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 7757f71fe709..7b9b70785a54 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -52,21 +52,27 @@ void __init orion_clkdev_init(struct clk *tclk)
static void fill_resources(struct platform_device *device,
struct resource *resources,
resource_size_t mapbase,
- resource_size_t size,
- unsigned int irq)
+ resource_size_t size)
{
device->resource = resources;
device->num_resources = 1;
resources[0].flags = IORESOURCE_MEM;
resources[0].start = mapbase;
resources[0].end = mapbase + size;
+}
- if (irq != NO_IRQ) {
- device->num_resources++;
- resources[1].flags = IORESOURCE_IRQ;
- resources[1].start = irq;
- resources[1].end = irq;
- }
+static void fill_resources_irq(struct platform_device *device,
+ struct resource *resources,
+ resource_size_t mapbase,
+ resource_size_t size,
+ unsigned int irq)
+{
+ fill_resources(device, resources, mapbase, size);
+
+ device->num_resources++;
+ resources[1].flags = IORESOURCE_IRQ;
+ resources[1].start = irq;
+ resources[1].end = irq;
}
/*****************************************************************************
@@ -93,7 +99,7 @@ static void __init uart_complete(
data->uartclk = uart_get_clk_rate(clk);
orion_uart->dev.platform_data = data;
- fill_resources(orion_uart, resources, mapbase, 0xff, irq);
+ fill_resources_irq(orion_uart, resources, mapbase, 0xff, irq);
platform_device_register(orion_uart);
}
@@ -305,8 +311,8 @@ void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
- mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
- fill_resources(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
+ mapbase + 0x2000, SZ_16K - 1);
+ fill_resources_irq(&orion_ge_mvmdio, orion_ge_mvmdio_resources,
mapbase + 0x2004, 0x84 - 1, irq_err);
orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge00_shared_data,
@@ -357,7 +363,7 @@ void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
unsigned int tx_csum_limit)
{
fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
- mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+ mapbase + 0x2000, SZ_16K - 1);
orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
ge_complete(&orion_ge01_shared_data,
orion_ge01_resources, irq, &orion_ge01_shared,
@@ -406,7 +412,7 @@ void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long irq)
{
fill_resources(&orion_ge10_shared, orion_ge10_shared_resources,
- mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+ mapbase + 0x2000, SZ_16K - 1);
ge_complete(&orion_ge10_shared_data,
orion_ge10_resources, irq, &orion_ge10_shared,
NULL,
@@ -454,7 +460,7 @@ void __init orion_ge11_init(struct mv643xx_eth_platform_data *eth_data,
unsigned long irq)
{
fill_resources(&orion_ge11_shared, orion_ge11_shared_resources,
- mapbase + 0x2000, SZ_16K - 1, NO_IRQ);
+ mapbase + 0x2000, SZ_16K - 1);
ge_complete(&orion_ge11_shared_data,
orion_ge11_resources, irq, &orion_ge11_shared,
NULL,
@@ -535,7 +541,7 @@ void __init orion_i2c_init(unsigned long mapbase,
unsigned long freq_m)
{
orion_i2c_pdata.freq_m = freq_m;
- fill_resources(&orion_i2c, orion_i2c_resources, mapbase,
+ fill_resources_irq(&orion_i2c, orion_i2c_resources, mapbase,
SZ_32 - 1, irq);
platform_device_register(&orion_i2c);
}
@@ -545,7 +551,7 @@ void __init orion_i2c_1_init(unsigned long mapbase,
unsigned long freq_m)
{
orion_i2c_1_pdata.freq_m = freq_m;
- fill_resources(&orion_i2c_1, orion_i2c_1_resources, mapbase,
+ fill_resources_irq(&orion_i2c_1, orion_i2c_1_resources, mapbase,
SZ_32 - 1, irq);
platform_device_register(&orion_i2c_1);
}
@@ -573,14 +579,14 @@ static struct platform_device orion_spi_1 = {
void __init orion_spi_init(unsigned long mapbase)
{
fill_resources(&orion_spi, &orion_spi_resources,
- mapbase, SZ_512 - 1, NO_IRQ);
+ mapbase, SZ_512 - 1);
platform_device_register(&orion_spi);
}
void __init orion_spi_1_init(unsigned long mapbase)
{
fill_resources(&orion_spi_1, &orion_spi_1_resources,
- mapbase, SZ_512 - 1, NO_IRQ);
+ mapbase, SZ_512 - 1);
platform_device_register(&orion_spi_1);
}
@@ -738,7 +744,7 @@ void __init orion_ehci_init(unsigned long mapbase,
enum orion_ehci_phy_ver phy_version)
{
orion_ehci_data.phy_version = phy_version;
- fill_resources(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
+ fill_resources_irq(&orion_ehci, orion_ehci_resources, mapbase, SZ_4K - 1,
irq);
platform_device_register(&orion_ehci);
@@ -762,7 +768,7 @@ static struct platform_device orion_ehci_1 = {
void __init orion_ehci_1_init(unsigned long mapbase,
unsigned long irq)
{
- fill_resources(&orion_ehci_1, orion_ehci_1_resources,
+ fill_resources_irq(&orion_ehci_1, orion_ehci_1_resources,
mapbase, SZ_4K - 1, irq);
platform_device_register(&orion_ehci_1);
@@ -786,7 +792,7 @@ static struct platform_device orion_ehci_2 = {
void __init orion_ehci_2_init(unsigned long mapbase,
unsigned long irq)
{
- fill_resources(&orion_ehci_2, orion_ehci_2_resources,
+ fill_resources_irq(&orion_ehci_2, orion_ehci_2_resources,
mapbase, SZ_4K - 1, irq);
platform_device_register(&orion_ehci_2);
@@ -816,7 +822,7 @@ void __init orion_sata_init(struct mv_sata_platform_data *sata_data,
unsigned long irq)
{
orion_sata.dev.platform_data = sata_data;
- fill_resources(&orion_sata, orion_sata_resources,
+ fill_resources_irq(&orion_sata, orion_sata_resources,
mapbase, 0x5000 - 1, irq);
platform_device_register(&orion_sata);
@@ -846,7 +852,7 @@ void __init orion_crypto_init(unsigned long mapbase,
unsigned long sram_size,
unsigned long irq)
{
- fill_resources(&orion_crypto, orion_crypto_resources,
+ fill_resources_irq(&orion_crypto, orion_crypto_resources,
mapbase, 0xffff, irq);
orion_crypto.num_resources = 3;
orion_crypto_resources[2].start = srambase;
--
2.9.0
next prev parent reply other threads:[~2016-09-06 14:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-06 14:06 [PATCH 1/4] ARM: mv78xx0: simplify ethernet device creation Arnd Bergmann
2016-09-06 14:06 ` Arnd Bergmann [this message]
2016-09-14 14:37 ` [PATCH 2/4] ARM: mvebu/orion: remove NO_IRQ check from device init Gregory CLEMENT
2016-09-06 14:06 ` [PATCH 3/4] ARM: orion5x: avoid NO_IRQ in orion_ge00_switch_init Arnd Bergmann
2016-09-07 2:03 ` Andrew Lunn
2016-09-08 15:20 ` Arnd Bergmann
2016-09-14 14:37 ` Gregory CLEMENT
2016-09-06 14:06 ` [PATCH 4/4] ARM: orion5x: remove extraneous NO_IRQ Arnd Bergmann
2016-09-07 1:49 ` Andrew Lunn
2016-09-14 14:38 ` Gregory CLEMENT
2016-09-07 1:30 ` [PATCH 1/4] ARM: mv78xx0: simplify ethernet device creation Andrew Lunn
2016-09-14 14:37 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160906140623.2853066-2-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=andrew@lunn.ch \
--cc=gregory.clement@free-electrons.com \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).