From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934554AbcIGMn0 (ORCPT ); Wed, 7 Sep 2016 08:43:26 -0400 Received: from mx.treblig.org ([80.68.94.177]:59858 "EHLO mx.treblig.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932462AbcIGMnU (ORCPT ); Wed, 7 Sep 2016 08:43:20 -0400 X-Greylist: delayed 1916 seconds by postgrey-1.27 at vger.kernel.org; Wed, 07 Sep 2016 08:43:19 EDT Date: Wed, 7 Sep 2016 13:11:18 +0100 From: "Dr. David Alan Gilbert" To: vadimp@mellanox.com Cc: rpurdie@rpsys.net, j.anaszewski@samsung.com, linux-leds@vger.kernel.org, linux-kernel@vger.kernel.org, jiri@resnulli.us, michaelsh@mellanox.com Subject: Re: [patch] leds: add driver for Mellanox systems leds Message-ID: <20160907121118.GA11361@gallifrey> References: <1473255323-191745-1-git-send-email-vadimp@mellanox.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1473255323-191745-1-git-send-email-vadimp@mellanox.com> X-Chocolate: 70 percent or better cocoa solids preferably X-Operating-System: Linux/3.4.108-kvm-i386-20150619 (i686) X-Uptime: 13:10:36 up 104 days, 21:33, 1 user, load average: 0.00, 0.01, 0.05 User-Agent: Mutt/1.5.23 (2014-03-12) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org * vadimp@mellanox.com (vadimp@mellanox.com) wrote: > From: Vadim Pasternak > > This makes it possible to create a set of LEDs for Mellanox systems: > "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", "msn2410", > "msb7800", "msn2740", "msn2100". > > Driver obtains led devices according to system configuration, provided > through system DMI data, like fan1:green, fan1:red and creates devices in > form: "devicename:colour:function". > > led setting is controlled through on board CPLD Lattice device. > For setting particular led off, solid, > blink (blink requires ledtrig-timer module): > echo 0 > /sys/class/leds/status\:green/brightness > echo 1 > /sys/class/leds/status\:green/brightness > echo timer > /sys/class/leds/status\:green/trigger > > On module probing all leds are set green, on removing - off. > > Last setting overwrites previous, f.e. sequence for > changing led from green - red - green: > echo 1 > /sys/class/leds/psu\:green/brightness > echo 1 > /sys/class/leds/psu\:red/brightness > echo 1 > /sys/class/leds/psu\:green/brightness > Note: leds cannot be turned on/off simultaneously. > > The Kconfig currently controlling compilation of this code is: > drivers/leds/Kconfig:config LEDS_MLXCPLD > > Signed-off-by: Vadim Pasternak > Reviewed-by: Jiri Pirko > --- > Documentation/leds/leds-mlxcpld.txt | 88 ++++++++ > MAINTAINERS | 8 + > drivers/leds/Kconfig | 8 + > drivers/leds/Makefile | 1 + > drivers/leds/leds-mlxcpld.c | 399 ++++++++++++++++++++++++++++++++++++ > 5 files changed, 504 insertions(+) > create mode 100644 Documentation/leds/leds-mlxcpld.txt > create mode 100644 drivers/leds/leds-mlxcpld.c > > diff --git a/Documentation/leds/leds-mlxcpld.txt b/Documentation/leds/leds-mlxcpld.txt > new file mode 100644 > index 0000000..575d765 > --- /dev/null > +++ b/Documentation/leds/leds-mlxcpld.txt > @@ -0,0 +1,88 @@ > +ver leds-mlxcpld > +========================== > +Driver for Mellanox systems leds. > +Provide system led support for the nex Mellanox systems: > +"msx6710", "msx6720", "msb7700", "msn2700", "msx1410", > +"msn2410", "msb7800", "msn2740", "msn2100". > + > +Description > +----------- > +Driver provides the following leds for the systems "msx6710", "msx6720", > +"msb7700", "msn2700", "msx1410", "msn2410", "msb7800", "msn2740": > + > + "status" > + CPLD reg offset: 0x20 > + Bits [3:0] > + > + "psu" > + CPLD reg offset: 0x20 > + Bits [7:4] > + > + "fan1" > + CPLD reg offset: 0x21 > + Bits [3:0] > + > + "fan2" > + CPLD reg offset: 0x21 > + Bits [7:4] > + > + "fan3" > + CPLD reg offset: 0x22 > + Bits [3:0] > + > + "fan4" > + CPLD reg offset: 0x22 > + Bits [7:4] > + > + Color mask for all the above leds: > + [bit3,bit2,bit1,bit0] or > + [bit7,bit6,bit5,bit4]: > + [0,0,0,0] = LED OFF > + [0,1,0,1] = Red static ON > + [1,1,0,1] = Green static ON > + [0,1,1,0] = Red blink 3Hz > + [1,1,1,0] = Green blink 3Hz > + [0,1,1,1] = Red blink 6Hz > + [1,1,1,1] = Green blink 6Hz > + > +Driver provides the following leds for the system "msn2100": > + "status" > + CPLD reg offset: 0x20 > + Bits [3:0] > + > + "fan" > + CPLD reg offset: 0x21 > + Bits [3:0] > + > + "psu1" > + CPLD reg offset: 0x23 > + Bits [3:0] > + > + "psu2" > + CPLD reg offset: 0x23 > + Bits [7:4] > + > + "uid" > + CPLD reg offset: 0x24 > + Bits [3:0] > + > + Color mask for all the above leds, excepted uid: > + [bit3,bit2,bit1,bit0] or > + [bit7,bit6,bit5,bit4]: > + [0,0,0,0] = LED OFF > + [0,1,0,1] = Red static ON > + [1,1,0,1] = Green static ON > + [0,1,1,0] = Red blink 3Hz > + [1,1,1,0] = Green blink 3Hz > + [0,1,1,1] = Red blink 6Hz > + [1,1,1,1] = Green blink 6Hz > + > + Color mask for uid led: > + [bit3,bit2,bit1,bit0]: > + [0,0,0,0] = LED OFF > + [1,1,0,1] = Blue static ON > + [1,1,1,0] = Blue blink 3Hz > + [1,1,1,1] = Blue blink 6Hz > + > +Driver supports HW blinking at 3Hz and 6Hz frequency (50% duty cycle). > +For 3Hz it is about 40 msec off and 40 msec on, for 6Hz - 80 msec off and on. > diff --git a/MAINTAINERS b/MAINTAINERS > index 0bbe4b1..adb9e9b 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -7655,6 +7655,14 @@ W: http://www.mellanox.com > Q: http://patchwork.ozlabs.org/project/netdev/list/ > F: drivers/net/ethernet/mellanox/mlxsw/ > > +MELLANOX MLXCPLD LED DRIVER > +M: Vadim Pasternak > +L: linux-leds@vger.kernel.org > +S: Supported > +W: http://www.mellanox.com > +F: drivers/leds/leds-mlxcpld.c > +F: Documentation/leds/leds-mlxcpld.txt > + > SOFT-ROCE DRIVER (rxe) > M: Moni Shoua > L: linux-rdma@vger.kernel.org > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index 9dcc9b1..4cd85be 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -631,6 +631,14 @@ config LEDS_VERSATILE > This option enabled support for the LEDs on the ARM Versatile > and RealView boards. Say Y to enabled these. > > +config LEDS_MLXCPLD > + tristate "LED support for the Mellanox boards" > + depends on X86_64 && DMI > + depends on LEDS_CLASS > + help > + This option enabled support for the LEDs on the Mellanox > + boards. Say Y to enabled these. > + > comment "LED Triggers" > source "drivers/leds/trigger/Kconfig" > > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile > index 0684c86..9a2494b 100644 > --- a/drivers/leds/Makefile > +++ b/drivers/leds/Makefile > @@ -68,6 +68,7 @@ obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o > obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o > obj-$(CONFIG_LEDS_SEAD3) += leds-sead3.o > obj-$(CONFIG_LEDS_IS31FL32XX) += leds-is31fl32xx.o > +obj-$(CONFIG_LEDS_MLXCPLD) += leds-mlxcpld.o > > # LED SPI Drivers > obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o > diff --git a/drivers/leds/leds-mlxcpld.c b/drivers/leds/leds-mlxcpld.c > new file mode 100644 > index 0000000..0ec2375 > --- /dev/null > +++ b/drivers/leds/leds-mlxcpld.c > @@ -0,0 +1,399 @@ > +/* > + * drivers/leds/leds-mlxcpld.c > + * Copyright (c) 2016 Mellanox Technologies. All rights reserved. > + * Copyright (c) 2016 Vadim Pasternak > + * > + * Redistribution and use in source and binary forms, with or without > + * modification, are permitted provided that the following conditions are met: > + * > + * 1. Redistributions of source code must retain the above copyright > + * notice, this list of conditions and the following disclaimer. > + * 2. Redistributions in binary form must reproduce the above copyright > + * notice, this list of conditions and the following disclaimer in the > + * documentation and/or other materials provided with the distribution. > + * 3. Neither the names of the copyright holders nor the names of its > + * contributors may be used to endorse or promote products derived from > + * this software without specific prior written permission. > + * > + * Alternatively, this software may be distributed under the terms of the > + * GNU General Public License ("GPL") version 2 as published by the Free > + * Software Foundation. > + * > + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" > + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE > + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE > + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF > + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS > + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN > + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) > + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE > + * POSSIBILITY OF SUCH DAMAGE. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500 /* LPC bus access */ > + > +/* Color codes for leds */ > +#define LED_OFFSET_HALF 0x01 /* Offset from solid for 3KHz blink */ > +#define LED_OFFSET_FULL 0x02 /* Offset from solid for 6KHz blink */ Is that Hz rather than kHz ? (Your comments below also say KHz). Dave > +#define LED_IS_OFF 0x00 /* Off */ > +#define LED_RED_STATIC_ON 0x05 /* Solid red */ > +#define LED_RED_BLINK_HALF (LED_RED_STATIC_ON + LED_OFFSET_HALF) > +#define LED_RED_BLINK_FULL (LED_RED_STATIC_ON + LED_OFFSET_FULL) > +#define LED_GREEN_STATIC_ON 0x0D /* Solid green */ > +#define LED_GREEN_BLINK_HALF (LED_GREEN_STATIC_ON + LED_OFFSET_HALF) > +#define LED_GREEN_BLINK_FULL (LED_GREEN_STATIC_ON + LED_OFFSET_FULL) > +#define LED_BLINK_3HZ 160 /* ~160 msec off/on */ > +#define LED_BLINK_6HZ 80 /* ~80 msec off/on */ > + > +/** > + * mlxcpld_param - led access parameters: > + * @offset - offset for led access in CPLD device > + * @mask - mask for led access in CPLD device > + * @base_color - base color code for led > +**/ > +struct mlxcpld_param { > + u8 offset; > + u8 mask; > + u8 base_color; > +}; > + > +/** > + * mlxcpld_led_priv - led private data: > + * @cled - led class device instance > + * @param - led CPLD access parameters > +**/ > +struct mlxcpld_led_priv { > + struct led_classdev cdev; > + struct mlxcpld_param param; > +}; > + > +#define cdev_to_priv(c) container_of(c, struct mlxcpld_led_priv, cdev) > + > +/** > + * mlxcpld_led_profile - system led profile (defined per system class): > + * @offset - offset for led access in CPLD device > + * @mask - mask for led access in CPLD device > + * @base_color - base color code > + * @brightness - default brightness setting (on/off) > + * @name - led name > +**/ > +struct mlxcpld_led_profile { > + u8 offset; > + u8 mask; > + u8 base_color; > + enum led_brightness brightness; > + const char *name; > +}; > + > +/** > + * mlxcpld_led_pdata - system led private data > + * @pdev - platform device pointer > + * @pled - led class device instance > + * @profile - system configuration profile > + * @num_led_instances - number of led instances > + * @lock - device access lock > +**/ > +struct mlxcpld_led_pdata { > + struct platform_device *pdev; > + struct mlxcpld_led_priv *pled; > + struct mlxcpld_led_profile *profile; > + int num_led_instances; > + spinlock_t lock; > +}; > + > +static struct mlxcpld_led_pdata *mlxcpld_led; > + > +/* Default profile fit the next Mellanox systems: > + * "msx6710", "msx6720", "msb7700", "msn2700", "msx1410", > + * "msn2410", "msb7800", "msn2740" > + */ > +struct mlxcpld_led_profile mlxcpld_led_default_profile[] = { > + { > + 0x21, 0xf0, LED_GREEN_STATIC_ON, 1, "fan1:green", > + }, > + { > + 0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan1:red", > + }, > + { > + 0x21, 0x0f, LED_GREEN_STATIC_ON, 1, "fan2:green", > + }, > + { > + 0x21, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan2:red", > + }, > + { > + 0x22, 0xf0, LED_GREEN_STATIC_ON, 1, "fan3:green", > + }, > + { > + 0x22, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan3:red", > + }, > + { > + 0x22, 0x0f, LED_GREEN_STATIC_ON, 1, "fan4:green", > + }, > + { > + 0x22, 0x0f, LED_RED_STATIC_ON, LED_OFF, "fan4:red", > + }, > + { > + 0x20, 0x0f, LED_GREEN_STATIC_ON, 1, "psu:green", > + }, > + { > + 0x20, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu:red", > + }, > + { > + 0x20, 0xf0, LED_GREEN_STATIC_ON, 1, "status:green", > + }, > + { > + 0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red", > + }, > +}; > + > +/* Profile fit the Mellanox systems based on "msn2100" */ > +struct mlxcpld_led_profile mlxcpld_led_msn2100_profile[] = { > + { > + 0x21, 0xf0, LED_GREEN_STATIC_ON, 1, "fan:green", > + }, > + { > + 0x21, 0xf0, LED_RED_STATIC_ON, LED_OFF, "fan:red", > + }, > + { > + 0x23, 0xf0, LED_GREEN_STATIC_ON, 1, "psu1:green", > + }, > + { > + 0x23, 0xf0, LED_RED_STATIC_ON, LED_OFF, "psu1:red", > + }, > + { > + 0x23, 0x0f, LED_GREEN_STATIC_ON, 1, "psu2:green", > + }, > + { > + 0x23, 0x0f, LED_RED_STATIC_ON, LED_OFF, "psu2:red", > + }, > + { > + 0x20, 0xf0, LED_GREEN_STATIC_ON, 1, "status:green", > + }, > + { > + 0x20, 0xf0, LED_RED_STATIC_ON, LED_OFF, "status:red", > + }, > + { > + 0x24, 0xf0, LED_GREEN_STATIC_ON, LED_OFF, "uid:blue", > + }, > +}; > + > +enum mlxcpld_led_platform_types { > + MLXCPLD_LED_PLATFORM_DEFAULT, > + MLXCPLD_LED_PLATFORM_MSN2100, > +}; > + > +const char *mlx_product_names[] = { > + "DEFAULT", > + "MSN2100", > +}; > + > +static enum > +mlxcpld_led_platform_types mlxcpld_led_platform_check_sys_type(void) > +{ > + const char *mlx_product_name; > + int i; > + > + mlx_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); > + if (!mlx_product_name) > + return MLXCPLD_LED_PLATFORM_DEFAULT; > + > + for (i = 1; i < ARRAY_SIZE(mlx_product_names); i++) { > + if (strstr(mlx_product_name, mlx_product_names[i])) > + return i; > + } > + > + return MLXCPLD_LED_PLATFORM_DEFAULT; > +} > + > +static void mlxcpld_led_bus_access_func(u16 base, u8 offset, u8 rw_flag, > + u8 *data) > +{ > + u32 addr = base + offset; > + > + if (rw_flag == 0) > + outb(*data, addr); > + else > + *data = inb(addr); > +} > + > +static void mlxcpld_led_store_hw(u8 mask, u8 off, u8 vset) > +{ > + u8 nib, val; > + > + /* Each led is controlled through low or high nibble of the relevant > + * CPLD register. Register offset is specified by off parameter. > + * Parameter vset provides color code: 0x0 for off, 0x5 for solid red, > + * 0x6 for 3KHz blink red, 0xd for solid green, 0xe for 3KHz blink > + * green. > + * Parameter mask specifies which nibble is used for specific led: mask > + * 0xf0 - lower nibble is to be used (bits from 0 to 3), mask 0x0f - > + * higher nibble (bits from 4 to 7). > + */ > + spin_lock(&mlxcpld_led->lock); > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 1, > + &val); > + nib = (mask == 0xf0) ? vset : (vset << 4); > + val = (val & mask) | nib; > + mlxcpld_led_bus_access_func(MLXPLAT_CPLD_LPC_REG_BASE_ADRR, off, 0, > + &val); > + spin_unlock(&mlxcpld_led->lock); > +} > + > +static void mlxcpld_led_brightness(struct led_classdev *led, > + enum led_brightness value) > +{ > + struct mlxcpld_led_priv *pled = cdev_to_priv(led); > + > + if (value) { > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, > + pled->param.base_color); > + return; > + } > + > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, > + LED_IS_OFF); > +} > + > +static int mlxcpld_led_blink(struct led_classdev *led, > + unsigned long *delay_on, > + unsigned long *delay_off) > +{ > + struct mlxcpld_led_priv *pled = cdev_to_priv(led); > + > + /* HW supports two types of blinking: full (6KHz) and half (3KHz). > + * For delay on/off zero default setting 3KHz is used. > + */ > + if (!(*delay_on == 0 && *delay_off == 0) && > + !(*delay_on == LED_BLINK_3HZ && *delay_off == LED_BLINK_3HZ) && > + !(*delay_on == LED_BLINK_6HZ && *delay_off == LED_BLINK_6HZ)) > + return -EINVAL; > + > + if (*delay_on == LED_BLINK_6HZ) > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, > + pled->param.base_color + LED_OFFSET_FULL); > + else > + mlxcpld_led_store_hw(pled->param.mask, pled->param.offset, > + pled->param.base_color + LED_OFFSET_HALF); > + > + return 0; > +} > + > +static int mlxcpld_led_config(struct device *dev, > + struct mlxcpld_led_pdata *cpld) > +{ > + int i; > + int err; > + > + cpld->pled = devm_kzalloc(dev, sizeof(struct mlxcpld_led_priv) * > + cpld->num_led_instances, GFP_KERNEL); > + if (!cpld->pled) > + return -ENOMEM; > + > + for (i = 0; i < cpld->num_led_instances; i++) { > + cpld->pled[i].cdev.name = cpld->profile[i].name; > + cpld->pled[i].cdev.brightness = cpld->profile[i].brightness; > + cpld->pled[i].cdev.max_brightness = 1; > + cpld->pled[i].cdev.brightness_set = mlxcpld_led_brightness; > + cpld->pled[i].cdev.blink_set = mlxcpld_led_blink; > + cpld->pled[i].cdev.flags = LED_CORE_SUSPENDRESUME; > + err = devm_led_classdev_register(dev, &cpld->pled[i].cdev); > + if (err) > + return err; > + > + cpld->pled[i].param.offset = mlxcpld_led->profile[i].offset; > + cpld->pled[i].param.mask = mlxcpld_led->profile[i].mask; > + cpld->pled[i].param.base_color = > + mlxcpld_led->profile[i].base_color; > + > + if (mlxcpld_led->profile[i].brightness) > + mlxcpld_led_brightness(&cpld->pled[i].cdev, > + mlxcpld_led->profile[i].brightness); > + } > + > + return 0; > +} > + > +static int __init mlxcpld_led_probe(struct platform_device *pdev) > +{ > + enum mlxcpld_led_platform_types mlxcpld_led_plat = > + mlxcpld_led_platform_check_sys_type(); > + > + mlxcpld_led = devm_kzalloc(&pdev->dev, sizeof(*mlxcpld_led), > + GFP_KERNEL); > + if (!mlxcpld_led) > + return -ENOMEM; > + > + mlxcpld_led->pdev = pdev; > + > + switch (mlxcpld_led_plat) { > + case MLXCPLD_LED_PLATFORM_MSN2100: > + mlxcpld_led->profile = mlxcpld_led_msn2100_profile; > + mlxcpld_led->num_led_instances = > + ARRAY_SIZE(mlxcpld_led_msn2100_profile); > + break; > + > + default: > + mlxcpld_led->profile = mlxcpld_led_default_profile; > + mlxcpld_led->num_led_instances = > + ARRAY_SIZE(mlxcpld_led_default_profile); > + break; > + } > + > + spin_lock_init(&mlxcpld_led->lock); > + > + return mlxcpld_led_config(&pdev->dev, mlxcpld_led); > +} > + > +static struct platform_driver mlxcpld_led_driver = { > + .driver = { > + .name = KBUILD_MODNAME, > + }, > +}; > + > +static int __init mlxcpld_led_init(void) > +{ > + struct platform_device *pdev; > + int err; > + > + pdev = platform_device_register_simple(KBUILD_MODNAME, -1, NULL, 0); > + if (!pdev) { > + pr_err("Device allocation failed\n"); > + return -ENOMEM; > + } > + > + err = platform_driver_probe(&mlxcpld_led_driver, mlxcpld_led_probe); > + if (err) { > + pr_err("Probe platform driver failed\n"); > + platform_device_unregister(pdev); > + } > + > + return err; > +} > + > +static void __exit mlxcpld_led_exit(void) > +{ > + platform_device_unregister(mlxcpld_led->pdev); > + platform_driver_unregister(&mlxcpld_led_driver); > +} > + > +module_init(mlxcpld_led_init); > +module_exit(mlxcpld_led_exit); > + > +MODULE_AUTHOR("Vadim Pasternak (vadimp@mellanox.com)"); > +MODULE_DESCRIPTION("Mellanox board LED driver"); > +MODULE_LICENSE("GPL v2"); > +MODULE_ALIAS("platform:leds_mlxcpld"); > -- > 2.1.4 > -- -----Open up your eyes, open up your mind, open up your code ------- / Dr. David Alan Gilbert | Running GNU/Linux | Happy \ \ dave @ treblig.org | | In Hex / \ _________________________|_____ http://www.treblig.org |_______/