From: Bjorn Helgaas <helgaas@kernel.org>
To: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Cc: bhelgaas@google.com, soren.brinkmann@xilinx.com,
christophe.jaillet@wanadoo.fr, grygorii.strashko@ti.com,
yinghai@kernel.org, lorenzo.pieralisi@arm.com,
fengguang.wu@intel.com, michal.simek@xilinx.com, arnd@arndb.de,
Bharat Kumar Gogada <bharatku@xilinx.com>,
linux-pci@vger.kernel.org, rgummal@xilinx.com,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/6] PCI: xilinx: Keep both legacy and MSI interrupt references.
Date: Mon, 12 Sep 2016 17:21:38 -0500 [thread overview]
Message-ID: <20160912222138.GK23532@localhost> (raw)
In-Reply-To: <1472724886-28301-1-git-send-email-bharatku@xilinx.com>
On Thu, Sep 01, 2016 at 03:44:41PM +0530, Bharat Kumar Gogada wrote:
> When built with MSI support the legacy domain reference is being
> overwritten with MSI.
> Instead creating two separate domains for MSI and legacy interrupts.
>
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
I'm looking for an ack from Michal for these...
> ---
> drivers/pci/host/pcie-xilinx.c | 26 +++++++++++++++-----------
> 1 file changed, 15 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/pci/host/pcie-xilinx.c b/drivers/pci/host/pcie-xilinx.c
> index a30e016..bd64677 100644
> --- a/drivers/pci/host/pcie-xilinx.c
> +++ b/drivers/pci/host/pcie-xilinx.c
> @@ -101,7 +101,8 @@
> * @msi_pages: MSI pages
> * @root_busno: Root Bus number
> * @dev: Device pointer
> - * @irq_domain: IRQ domain pointer
> + * @msi_domain: MSI IRQ domain pointer
> + * @leg_domain: Legacy IRQ domain pointer
> * @resources: Bus Resources
> */
> struct xilinx_pcie_port {
> @@ -110,7 +111,8 @@ struct xilinx_pcie_port {
> unsigned long msi_pages;
> u8 root_busno;
> struct device *dev;
> - struct irq_domain *irq_domain;
> + struct irq_domain *msi_domain;
> + struct irq_domain *leg_domain;
> struct list_head resources;
> };
>
> @@ -281,7 +283,7 @@ static int xilinx_pcie_msi_setup_irq(struct msi_controller *chip,
> if (hwirq < 0)
> return hwirq;
>
> - irq = irq_create_mapping(port->irq_domain, hwirq);
> + irq = irq_create_mapping(port->msi_domain, hwirq);
> if (!irq)
> return -EINVAL;
>
> @@ -443,7 +445,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
> /* Handle INTx Interrupt */
> val = ((val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
> XILINX_PCIE_RPIFR1_INTR_SHIFT) + 1;
> - generic_handle_irq(irq_find_mapping(port->irq_domain,
> + generic_handle_irq(irq_find_mapping(port->leg_domain,
> val));
> }
> }
> @@ -526,12 +528,14 @@ static void xilinx_pcie_free_irq_domain(struct xilinx_pcie_port *port)
> }
>
> for (i = 0; i < num_irqs; i++) {
> - irq = irq_find_mapping(port->irq_domain, i);
> + irq = irq_find_mapping(port->leg_domain, i);
> if (irq > 0)
> irq_dispose_mapping(irq);
> }
> -
> - irq_domain_remove(port->irq_domain);
> + if (port->leg_domain)
> + irq_domain_remove(port->leg_domain);
> + if (port->msi_domain)
> + irq_domain_remove(port->msi_domain);
> }
>
> /**
> @@ -553,21 +557,21 @@ static int xilinx_pcie_init_irq_domain(struct xilinx_pcie_port *port)
> return -ENODEV;
> }
>
> - port->irq_domain = irq_domain_add_linear(pcie_intc_node, 4,
> + port->leg_domain = irq_domain_add_linear(pcie_intc_node, 4,
> &intx_domain_ops,
> port);
> - if (!port->irq_domain) {
> + if (!port->leg_domain) {
> dev_err(dev, "Failed to get a INTx IRQ domain\n");
> return -ENODEV;
> }
>
> /* Setup MSI */
> if (IS_ENABLED(CONFIG_PCI_MSI)) {
> - port->irq_domain = irq_domain_add_linear(node,
> + port->msi_domain = irq_domain_add_linear(node,
> XILINX_NUM_MSI_IRQS,
> &msi_domain_ops,
> &xilinx_pcie_msi_chip);
> - if (!port->irq_domain) {
> + if (!port->msi_domain) {
> dev_err(dev, "Failed to get a MSI IRQ domain\n");
> return -ENODEV;
> }
> --
> 2.1.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2016-09-12 22:21 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-01 10:14 [PATCH 1/6] PCI: xilinx: Keep both legacy and MSI interrupt references Bharat Kumar Gogada
2016-09-01 10:14 ` [PATCH 2/6] PCI: Xilinx : Clear interrupt register for invalid interrupt Bharat Kumar Gogada
2016-09-01 10:14 ` [PATCH 3/6] PCI: Xilinx: Clear correct msi set bit Bharat Kumar Gogada
2016-09-01 10:14 ` [PATCH 4/6] PCI: Xilinx: Dispose MSI virtual irq Bharat Kumar Gogada
2016-09-01 10:14 ` [PATCH 5/6] PCI: Xilinx: Read more than one function per device Bharat Kumar Gogada
2016-09-01 10:14 ` [PATCH 6/6] Microblaze: Modify microblaze pci specific code to support multidomain Bharat Kumar Gogada
2016-09-12 22:21 ` Bjorn Helgaas [this message]
2016-09-13 15:56 ` [PATCH 1/6] PCI: xilinx: Keep both legacy and MSI interrupt references Bjorn Helgaas
2016-09-14 15:32 ` Bharat Kumar Gogada
2016-09-14 19:17 ` Bjorn Helgaas
2016-09-15 5:09 ` Bharat Kumar Gogada
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160912222138.GK23532@localhost \
--to=helgaas@kernel.org \
--cc=arnd@arndb.de \
--cc=bharat.kumar.gogada@xilinx.com \
--cc=bharatku@xilinx.com \
--cc=bhelgaas@google.com \
--cc=christophe.jaillet@wanadoo.fr \
--cc=fengguang.wu@intel.com \
--cc=grygorii.strashko@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=michal.simek@xilinx.com \
--cc=rgummal@xilinx.com \
--cc=soren.brinkmann@xilinx.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).