linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Cc: linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 0/2] Avoid selftests on some Asus models
Date: Sun, 2 Oct 2016 22:16:31 -0700	[thread overview]
Message-ID: <20161003051631.GA22473@dtor-ws> (raw)
In-Reply-To: <20161001105637.GA2608@xfiles>

On Sat, Oct 01, 2016 at 07:56:37AM -0300, Marcos Paulo de Souza wrote:
> ping?

Sorry for the delay, I was trying to wrap my mind around the new
always/never/sometimes logic.

Does the version below still work for you?

Thanks.

-- 
Dmitry

Input: i8042 - skip selftest on ASUS laptops

From: Marcos Paulo de Souza <marcos.souza.org@gmail.com>

On suspend/resume cycle, selftest is executed to reset i8042 controller.
But when this is done in Asus devices, subsequent calls to detect/init
functions to elantech driver fails. Skipping selftest fixes this problem.

An easier step to reproduce this problem is adding i8042.reset=1 as a
kernel parameter. On Asus laptops, it'll make the system to start with the
touchpad already stuck, since psmouse_probe forcibly calls the selftest
function.

This patch was inspired by John Hiesey's change[1], but, since this problem
affects a lot of models of Asus, let's avoid running selftests on them.

All models affected by this problem:
A455LD
K401LB
K501LB
K501LX
R409L
V502LX
X302LA
X450LCP
X450LD
X455LAB
X455LDB
X455LF
Z450LA

[1]: https://marc.info/?l=linux-input&m=144312209020616&w=2

Fixes: "ETPS/2 Elantech Touchpad dies after resume from suspend"
(https://bugzilla.kernel.org/show_bug.cgi?id=107971)

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
 Documentation/kernel-parameters.txt     |    9 +++
 drivers/input/serio/i8042-io.h          |    2 -
 drivers/input/serio/i8042-ip22io.h      |    2 -
 drivers/input/serio/i8042-ppcio.h       |    2 -
 drivers/input/serio/i8042-sparcio.h     |    2 -
 drivers/input/serio/i8042-unicore32io.h |    2 -
 drivers/input/serio/i8042-x86ia64io.h   |   96 ++++++++++++++++++++++++++++++-
 drivers/input/serio/i8042.c             |   55 ++++++++++++++----
 8 files changed, 150 insertions(+), 20 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a4f4d69..46726d4 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1457,7 +1457,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	i8042.nopnp	[HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
 			     controllers
 	i8042.notimeout	[HW] Ignore timeout condition signalled by controller
-	i8042.reset	[HW] Reset the controller during init and cleanup
+	i8042.reset	[HW] Reset the controller during init, cleanup and
+			     suspend-to-ram transitions, only during s2r
+			     transitions, or never reset
+			Format: { 1 | Y | y | 0 | N | n }
+			1, Y, y: always reset controller
+			0, N, n: don't ever reset controller
+			Default: only on s2r transitions on x86; most other
+			architectures force reset to be always executed
 	i8042.unlock	[HW] Unlock (ignore) the keylock
 	i8042.kbdreset  [HW] Reset device connected to KBD port
 
diff --git a/drivers/input/serio/i8042-io.h b/drivers/input/serio/i8042-io.h
index a5eed2a..34da81c 100644
--- a/drivers/input/serio/i8042-io.h
+++ b/drivers/input/serio/i8042-io.h
@@ -81,7 +81,7 @@ static inline int i8042_platform_init(void)
 		return -EBUSY;
 #endif
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-ip22io.h b/drivers/input/serio/i8042-ip22io.h
index ee1ad27..08a1c10 100644
--- a/drivers/input/serio/i8042-ip22io.h
+++ b/drivers/input/serio/i8042-ip22io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
 		return -EBUSY;
 #endif
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 
 	return 0;
 }
diff --git a/drivers/input/serio/i8042-ppcio.h b/drivers/input/serio/i8042-ppcio.h
index f708c75..1aabea4 100644
--- a/drivers/input/serio/i8042-ppcio.h
+++ b/drivers/input/serio/i8042-ppcio.h
@@ -44,7 +44,7 @@ static inline void i8042_write_command(int val)
 
 static inline int i8042_platform_init(void)
 {
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-sparcio.h b/drivers/input/serio/i8042-sparcio.h
index afcd1c1..6231d63 100644
--- a/drivers/input/serio/i8042-sparcio.h
+++ b/drivers/input/serio/i8042-sparcio.h
@@ -130,7 +130,7 @@ static int __init i8042_platform_init(void)
 		}
 	}
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 
 	return 0;
 }
diff --git a/drivers/input/serio/i8042-unicore32io.h b/drivers/input/serio/i8042-unicore32io.h
index 73f5cc1..4557475 100644
--- a/drivers/input/serio/i8042-unicore32io.h
+++ b/drivers/input/serio/i8042-unicore32io.h
@@ -61,7 +61,7 @@ static inline int i8042_platform_init(void)
 	if (!request_mem_region(I8042_REGION_START, I8042_REGION_SIZE, "i8042"))
 		return -EBUSY;
 
-	i8042_reset = 1;
+	i8042_reset = I8042_RESET_ALWAYS;
 	return 0;
 }
 
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 60d74e1..07d547d 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -518,6 +518,90 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 	{ }
 };
 
+/*
+ * On some Asus laptops, just running self tests cause problems.
+ */
+static const struct dmi_system_id i8042_dmi_noselftest_table[] = {
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "A455LD"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K401LB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K501LB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "K501LX"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "R409L"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "V502LX"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X302LA"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X450LD"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LAB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LDB"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "X455LF"),
+		},
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Z450LA"),
+		},
+	},
+	{ }
+};
 static const struct dmi_system_id __initconst i8042_dmi_reset_table[] = {
 	{
 		/* MSI Wind U-100 */
@@ -1080,12 +1164,18 @@ static int __init i8042_platform_init(void)
 		return retval;
 
 #if defined(__ia64__)
-        i8042_reset = true;
+        i8042_reset = I8042_RESET_ALWAYS;
 #endif
 
 #ifdef CONFIG_X86
-	if (dmi_check_system(i8042_dmi_reset_table))
-		i8042_reset = true;
+	/* Honor module parameter when value is not default */
+	if (i8042_reset == I8042_RESET_DEFAULT) {
+		if (dmi_check_system(i8042_dmi_reset_table))
+			i8042_reset = I8042_RESET_ALWAYS;
+
+		if (dmi_check_system(i8042_dmi_noselftest_table))
+			i8042_reset = I8042_RESET_NEVER;
+	}
 
 	if (dmi_check_system(i8042_dmi_noloop_table))
 		i8042_noloop = true;
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 405252a..89abfdb 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -48,9 +48,39 @@ static bool i8042_unlock;
 module_param_named(unlock, i8042_unlock, bool, 0);
 MODULE_PARM_DESC(unlock, "Ignore keyboard lock.");
 
-static bool i8042_reset;
-module_param_named(reset, i8042_reset, bool, 0);
-MODULE_PARM_DESC(reset, "Reset controller during init and cleanup.");
+enum i8042_controller_reset_mode {
+	I8042_RESET_NEVER,
+	I8042_RESET_ALWAYS,
+	I8042_RESET_ON_S2RAM,
+#define I8042_RESET_DEFAULT	I8042_RESET_ON_S2RAM
+};
+static enum i8042_controller_reset_mode i8042_reset = I8042_RESET_DEFAULT;
+static int i8042_set_reset(const char *val, const struct kernel_param *kp)
+{
+	enum i8042_controller_reset_mode *arg = kp->arg;
+	int error;
+	bool reset;
+
+	if (val) {
+		error = kstrtobool(val, &reset);
+		if (error)
+			return error;
+	} else {
+		reset = true;
+	}
+
+	*arg = reset ? I8042_RESET_ALWAYS : I8042_RESET_NEVER;
+	return 0;
+}
+
+static const struct kernel_param_ops param_ops_reset_param = {
+	.flags = KERNEL_PARAM_OPS_FL_NOARG,
+	.set = i8042_set_reset,
+};
+#define param_check_reset_param(name, p)	\
+	__param_check(name, p, enum i8042_controller_reset_mode)
+module_param_named(reset, i8042_reset, reset_param, 0);
+MODULE_PARM_DESC(reset, "Reset controller on resume, cleanup or both");
 
 static bool i8042_direct;
 module_param_named(direct, i8042_direct, bool, 0);
@@ -1019,7 +1049,7 @@ static int i8042_controller_init(void)
  * Reset the controller and reset CRT to the original value set by BIOS.
  */
 
-static void i8042_controller_reset(bool force_reset)
+static void i8042_controller_reset(bool s2r_wants_reset)
 {
 	i8042_flush();
 
@@ -1044,8 +1074,10 @@ static void i8042_controller_reset(bool force_reset)
  * Reset the controller if requested.
  */
 
-	if (i8042_reset || force_reset)
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
 		i8042_controller_selftest();
+	}
 
 /*
  * Restore the original control register setting.
@@ -1110,7 +1142,7 @@ static void i8042_dritek_enable(void)
  * before suspending.
  */
 
-static int i8042_controller_resume(bool force_reset)
+static int i8042_controller_resume(bool s2r_wants_reset)
 {
 	int error;
 
@@ -1118,7 +1150,8 @@ static int i8042_controller_resume(bool force_reset)
 	if (error)
 		return error;
 
-	if (i8042_reset || force_reset) {
+	if (i8042_reset == I8042_RESET_ALWAYS ||
+	    (i8042_reset == I8042_RESET_ON_S2RAM && s2r_wants_reset)) {
 		error = i8042_controller_selftest();
 		if (error)
 			return error;
@@ -1195,7 +1228,7 @@ static int i8042_pm_resume_noirq(struct device *dev)
 
 static int i8042_pm_resume(struct device *dev)
 {
-	bool force_reset;
+	bool want_reset;
 	int i;
 
 	for (i = 0; i < I8042_NUM_PORTS; i++) {
@@ -1218,9 +1251,9 @@ static int i8042_pm_resume(struct device *dev)
 	 * off control to the platform firmware, otherwise we can simply restore
 	 * the mode.
 	 */
-	force_reset = pm_resume_via_firmware();
+	want_reset = pm_resume_via_firmware();
 
-	return i8042_controller_resume(force_reset);
+	return i8042_controller_resume(want_reset);
 }
 
 static int i8042_pm_thaw(struct device *dev)
@@ -1482,7 +1515,7 @@ static int __init i8042_probe(struct platform_device *dev)
 
 	i8042_platform_device = dev;
 
-	if (i8042_reset) {
+	if (i8042_reset == I8042_RESET_ALWAYS) {
 		error = i8042_controller_selftest();
 		if (error)
 			return error;

  reply	other threads:[~2016-10-03  5:16 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-25 13:25 [PATCH v4 0/2] Avoid selftests on some Asus models Marcos Paulo de Souza
2016-09-25 13:25 ` [PATCH] input/serio/i8042.c: Skipt selftest on ASUS laptops Marcos Paulo de Souza
2016-09-25 13:25 ` [PATCH v4 2/2] kernel-parameters: Update i8042.reset parameter documentation Marcos Paulo de Souza
2016-10-01 10:56 ` [PATCH v4 0/2] Avoid selftests on some Asus models Marcos Paulo de Souza
2016-10-03  5:16   ` Dmitry Torokhov [this message]
2016-10-03 12:07     ` Marcos Paulo de Souza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161003051631.GA22473@dtor-ws \
    --to=dmitry.torokhov@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcos.souza.org@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).