From: "Andrew F. Davis" <afd@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, "Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support
Date: Fri, 7 Oct 2016 09:44:22 -0500 [thread overview]
Message-ID: <20161007144428.16671-1-afd@ti.com> (raw)
The SN65HVS882 is available on the AM335x-ICEv2 and is attached to SPI0.
Input is attached to the I/O header.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
arch/arm/boot/dts/am335x-icev2.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-icev2.dts b/arch/arm/boot/dts/am335x-icev2.dts
index 85e04c2..d46efc6 100644
--- a/arch/arm/boot/dts/am335x-icev2.dts
+++ b/arch/arm/boot/dts/am335x-icev2.dts
@@ -187,6 +187,8 @@
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
+ AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
+ AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
>;
};
@@ -224,6 +226,24 @@
};
};
+&spi0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_default>;
+
+ sn65hvs882@1 {
+ compatible = "pisosr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+
+ reg = <1>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+ };
+};
+
#include "tps65910.dtsi"
&tps {
--
2.10.0
next reply other threads:[~2016-10-07 14:44 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-07 14:44 Andrew F. Davis [this message]
2016-10-07 14:44 ` [PATCH 2/7] ARM: dts: am335x-icev2: Disable Industrial I/O LEDs and fix naming Andrew F. Davis
2016-10-07 14:44 ` [PATCH 3/7] ARM: dts: am335x-icev2: Add ADC support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 4/7] ARM: dts: am437x-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 5/7] ARM: dts: am437x-idk: Add Industrial output support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 6/7] ARM: dts: am57xx-idk: Add Industrial input support Andrew F. Davis
2016-10-07 14:44 ` [PATCH 7/7] ARM: dts: am57xx-idk: Add Industrial output support Andrew F. Davis
2016-11-18 15:00 ` [PATCH 1/7] ARM: dts: am335x-icev2: Add Industrial input support Andrew F. Davis
2016-11-18 15:08 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161007144428.16671-1-afd@ti.com \
--to=afd@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).