From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751991AbcJJT4B (ORCPT ); Mon, 10 Oct 2016 15:56:01 -0400 Received: from mail-oi0-f67.google.com ([209.85.218.67]:33050 "EHLO mail-oi0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751171AbcJJTz6 (ORCPT ); Mon, 10 Oct 2016 15:55:58 -0400 Date: Mon, 10 Oct 2016 14:54:58 -0500 From: Rob Herring To: Pantelis Antoniou Cc: Lee Jones , Linus Walleij , Alexandre Courbot , Mark Rutland , Frank Rowand , Wolfram Sang , David Woodhouse , Brian Norris , Florian Fainelli , Wim Van Sebroeck , Peter Rosin , Debjit Ghosh , Georgi Vlaev , Guenter Roeck , Maryam Seraj , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-watchdog@vger.kernel.org, netdev@vger.kernel.org Subject: Re: [PATCH 04/10] i2c: i2c-sam: Add device tree bindings Message-ID: <20161010195458.GA20134@rob-hp-laptop> References: <1475853518-22264-1-git-send-email-pantelis.antoniou@konsulko.com> <1475853518-22264-5-git-send-email-pantelis.antoniou@konsulko.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1475853518-22264-5-git-send-email-pantelis.antoniou@konsulko.com> User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Fri, Oct 07, 2016 at 06:18:32PM +0300, Pantelis Antoniou wrote: > From: Georgi Vlaev > > Add binding document for the i2c driver of SAM FPGA. > > Signed-off-by: Georgi Vlaev > [Ported from Juniper kernel] > Signed-off-by: Pantelis Antoniou > --- > .../devicetree/bindings/i2c/i2c-sam-mux.txt | 20 ++++++++++ > Documentation/devicetree/bindings/i2c/i2c-sam.txt | 44 ++++++++++++++++++++++ > 2 files changed, 64 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sam-mux.txt > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sam.txt > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-sam-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-sam-mux.txt > new file mode 100644 > index 0000000..10ddffa > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-sam-mux.txt > @@ -0,0 +1,20 @@ > +Juniper's SAM FPGA I2C accelerator mux > + > +The SAM FPGA I2C mux is present only on Juniper SAM FPGA PTX series > +of routers. > + > +The definition of the i2c sam bus is located in the i2c-sam.txt document. > + > +Required properties: > +- compatible: should be "jnx,i2c-sam-mux". > +- reg: master number and mux number. This is not how i2c muxes are done. > + > +Optional properties: > +- speed: If present must be either 100000 or 400000. No other values supported. > + > +Examples: > + > +pe1i2c: i2c-sam-mux@1,0 { i2c-mux@... > + compatible = "jnx,i2c-sam-mux"; > + reg = <1 0>; > +}; > diff --git a/Documentation/devicetree/bindings/i2c/i2c-sam.txt b/Documentation/devicetree/bindings/i2c/i2c-sam.txt > new file mode 100644 > index 0000000..4830b48 > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-sam.txt > @@ -0,0 +1,44 @@ > +Juniper's SAM FPGA I2C accelerator > + > +The SAM FPGA accelerator is used to connect the large number of > +I2C muxes that are present on Juniper PTX series of routers. > +While it's an i2c bus, no other devices are located besides > +i2c-sam-mux devices. > + > +The definition of the i2c sam mux is located in the i2c-sam-mux.txt document. > + > +Required properties: > +- compatible: should be "jnx,i2c-sam". > +- #address-cells: should be 2. > +- #size-cells: should be 0. > +- mux-channels: number of mux channels present What is this needed for? > + > +Optional properties: > +- reg: offset and length of the register set for the device are optional since > + typically the register range is provided by the parent SAM MFD device. > +- master-offset: Offset of where the master register memory starts. > + Default value is 0x8000. Make this required. > +- reverse-fill: Fill the start entries of transactions in reverse order Needs a better explanation. > +- priority-tables: Use the pre-programmed priority tables in the FPGA What does not present mean? > +- i2c-options: list of options to be written to the option field in the > + FPGA controlling things like SCL push-pull drives, hold-times, etc. > +- bus-range: start of bus master range and number of masters. Needs a better explanation. > + > +Examples: > + > +i2c-sam { > + compatible = "jnx,i2c-sam"; > + mux-channels = <2>; > + #size-cells = <0>; > + #address-cells = <2>; > + > + /* PE0 */ pe0i2c: i2c-sam-mux@0,0 { i2c-mux@... > + compatible = "jnx,i2c-sam-mux"; > + reg = <0 0>; > + }; > + > + /* PE1 */ pe1i2c: i2c-sam-mux@1,0 { > + compatible = "jnx,i2c-sam-mux"; > + reg = <1 0>; > + }; > +}; > -- > 1.9.1 >