From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <linux-kernel-owner@vger.kernel.org>
Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand
        id S964914AbcJRAnf (ORCPT <rfc822;w@1wt.eu>);
        Mon, 17 Oct 2016 20:43:35 -0400
Received: from mail-pf0-f178.google.com ([209.85.192.178]:32811 "EHLO
        mail-pf0-f178.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org
        with ESMTP id S934990AbcJRAm4 (ORCPT
        <rfc822;linux-kernel@vger.kernel.org>);
        Mon, 17 Oct 2016 20:42:56 -0400
From: Stephen Boyd <stephen.boyd@linaro.org>
To: Sebastian Reichel <sre@kernel.org>
Cc: "Bird, Tim" <Tim.Bird@sonymobile.com>,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        Mark Brown <broonie@kernel.org>, linux-pm@vger.kernel.org,
        linux-arm-msm@vger.kernel.org,
        Bjorn Andersson <bjorn.andersson@linaro.org>,
        Andy Gross <andy.gross@linaro.org>, Tim Bird <tim.bird@sonymobile.com>
Subject: [PATCH v5 1/2] dt-binding: power: Add otg regulator binding
Date: Mon, 17 Oct 2016 17:42:50 -0700
Message-Id: <20161018004251.28733-2-stephen.boyd@linaro.org>
X-Mailer: git-send-email 2.10.0.297.gf6727b0
In-Reply-To: <20161018004251.28733-1-stephen.boyd@linaro.org>
References: <20161018004251.28733-1-stephen.boyd@linaro.org>
Sender: linux-kernel-owner@vger.kernel.org
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

From: "Bird, Tim" <Tim.Bird@sonymobile.com>

Add a binding for the regulator which controls the OTG chargepath switch.
The OTG switch gets its power from pm8941_5vs1, and that should be
expressed as a usb_otg_in-supply property in the DT node for the
charger driver.  The regulator name is "otg-vbus".

Signed-off-by: Tim Bird <tim.bird@sonymobile.com>
Acked-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
---
 .../devicetree/bindings/power/supply/qcom_smbb.txt    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
index 65b88fac854b..06f8a5ddb68e 100644
--- a/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
+++ b/Documentation/devicetree/bindings/power/supply/qcom_smbb.txt
@@ -105,6 +105,22 @@ PROPERTIES
                regulation must be done externally to fully comply with
                the JEITA safety guidelines if this flag is set.
 
+- usb_otg_in-supply:
+  Usage: optional
+  Value type: <phandle>
+  Description: Reference to the regulator supplying power to the USB_OTG_IN
+               pin.
+
+child nodes:
+- otg-vbus:
+  Usage: optional
+  Description: This node defines a regulator used to control the direction
+               of VBUS voltage - specifically: whether to supply voltage
+               to VBUS for host mode operation of the OTG port, or allow
+               input voltage from external VBUS for charging.  In the
+               hardware, the supply for this regulator comes from
+               usb_otg_in-supply.
+
 EXAMPLE
 charger@1000 {
        compatible = "qcom,pm8941-charger";
@@ -128,4 +144,7 @@ charger@1000 {
 
        qcom,fast-charge-current-limit = <1000000>;
        qcom,dc-charge-current-limit = <1000000>;
+       usb_otg_in-supply = <&pm8941_5vs1>;
+
+       otg-vbus {};
 };
-- 
2.10.0.297.gf6727b0