From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S941564AbcJYGnD (ORCPT ); Tue, 25 Oct 2016 02:43:03 -0400 Received: from up.free-electrons.com ([163.172.77.33]:33887 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933470AbcJYGnB (ORCPT ); Tue, 25 Oct 2016 02:43:01 -0400 Date: Tue, 25 Oct 2016 08:42:56 +0200 From: Boris Brezillon To: Sascha Hauer Cc: Lukasz Majewski , Thierry Reding , Stefan Agner , linux-pwm@vger.kernel.org, Bhuvanchandra DV , linux-kernel@vger.kernel.org, kernel@pengutronix.de, Fabio Estevam , Fabio Estevam , Lothar Wassmann Subject: Re: [PATCH 1/6] pwm: imx: Rewrite imx_pwm_*_v1 code to facilitate switch to atomic pwm operation Message-ID: <20161025084256.546139cc@bbrezillon> In-Reply-To: <20161025063259.clbb3ta7qdpej2xq@pengutronix.de> References: <1477259146-19167-1-git-send-email-l.majewski@majess.pl> <1477259146-19167-2-git-send-email-l.majewski@majess.pl> <20161025055454.emytytmcg6d23jdd@pengutronix.de> <20161025082737.2ecc9fe4@bbrezillon> <20161025063259.clbb3ta7qdpej2xq@pengutronix.de> X-Mailer: Claws Mail 3.13.2 (GTK+ 2.24.30; x86_64-pc-linux-gnu) MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Tue, 25 Oct 2016 08:32:59 +0200 Sascha Hauer wrote: > On Tue, Oct 25, 2016 at 08:27:37AM +0200, Boris Brezillon wrote: > > On Tue, 25 Oct 2016 07:54:54 +0200 > > Sascha Hauer wrote: > > > > > On Sun, Oct 23, 2016 at 11:45:41PM +0200, Lukasz Majewski wrote: > > > > The code has been rewritten to remove "generic" calls to > > > > imx_pwm_{enable|disable|config}. > > > > > > > > Such approach would facilitate switch to atomic PWM (a.k.a ->apply()) > > > > implementation. > > > > > > > > Suggested-by: Stefan Agner > > > > Suggested-by: Boris Brezillon > > > > Signed-off-by: Lukasz Majewski > > > > --- > > > > drivers/pwm/pwm-imx.c | 46 ++++++++++++++++++++++++++++++++++------------ > > > > 1 file changed, 34 insertions(+), 12 deletions(-) > > > > > > > > diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c > > > > index c37d223..83e43d5 100644 > > > > --- a/drivers/pwm/pwm-imx.c > > > > +++ b/drivers/pwm/pwm-imx.c > > > > @@ -66,8 +66,6 @@ struct imx_chip { > > > > static int imx_pwm_config_v1(struct pwm_chip *chip, > > > > struct pwm_device *pwm, int duty_ns, int period_ns) > > > > { > > > > - struct imx_chip *imx = to_imx_chip(chip); > > > > - > > > > /* > > > > * The PWM subsystem allows for exact frequencies. However, > > > > * I cannot connect a scope on my device to the PWM line and > > > > @@ -85,26 +83,52 @@ static int imx_pwm_config_v1(struct pwm_chip *chip, > > > > * both the prescaler (/1 .. /128) and then by CLKSEL > > > > * (/2 .. /16). > > > > */ > > > > + struct imx_chip *imx = to_imx_chip(chip); > > > > u32 max = readl(imx->mmio_base + MX1_PWMP); > > > > u32 p = max * duty_ns / period_ns; > > > > + int ret; > > > > + > > > > + ret = clk_prepare_enable(imx->clk_ipg); > > > > + if (ret) > > > > + return ret; > > > > + > > > > writel(max - p, imx->mmio_base + MX1_PWMS); > > > > > > > > + clk_disable_unprepare(imx->clk_ipg); > > > > + > > > > return 0; > > > > } > > > > > > > > -static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable) > > > > +static int imx_pwm_enable_v1(struct pwm_chip *chip, struct pwm_device *pwm) > > > > { > > > > struct imx_chip *imx = to_imx_chip(chip); > > > > + int ret; > > > > u32 val; > > > > > > > > + ret = clk_prepare_enable(imx->clk_ipg); > > > > + if (ret) > > > > + return ret; > > > > + > > > > val = readl(imx->mmio_base + MX1_PWMC); > > > > + val |= MX1_PWMC_EN; > > > > + writel(val, imx->mmio_base + MX1_PWMC); > > > > > > > > - if (enable) > > > > - val |= MX1_PWMC_EN; > > > > - else > > > > - val &= ~MX1_PWMC_EN; > > > > + clk_disable_unprepare(imx->clk_per); > > > > > > This looks wrong. You start by enabling clk_ipg which is needed for > > > register access, but then end with disabling clk_per which is needed for > > > driving the actual PWM output. This function should probably enable > > > clk_per on entry and enable clk_ipg while accessing registers. > > > > Oh, I didn't notice there was 2 different clocks here. This probably > > means you have to enable clk_ipg when manipulating the registers in > > ->disable(). > > > > One question, if there's a separate clk for the registers, why don't we > > leave this clock enabled, and disable it in ->suspend() or ->remove() > > instead of enabling/disabling it each time we access the registers? > > Well, if we don't need this clock, then why not save the power and > disable it? That's true, especially if enabling the clock is instantaneous (i.e. the clock driver does not have to wait for the clk to be ready). > However, I'll have to ask Philipp about this clock. It was introduced in > > commit 7b27c160c68152581c702b9f1fe362338d2a0cad > Author: Philipp Zabel > Date: Mon Jun 25 16:15:20 2012 +0200 > > And even back then the additional clock was not enabled for all register > accesses, so handling this seems broken from the start. > > Sascha > >