From: Jaehoon Chung <jh80.chung@samsung.com>
To: linux-mmc@vger.kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-samsung-soc@vger.kernel.org,
linux-rockchip@lists.infradead.org, ulf.hansson@linaro.org,
robh+dt@kernel.org, krzk@kernel.org, heiko@sntech.de,
shawn.lin@rock-chips.com, Jaehoon Chung <jh80.chung@samsung.com>
Subject: [PATCH 12/13] ARM64: dts: rockchip: replace to "max-frequency" instead of "clock-freq-min-max"
Date: Thu, 03 Nov 2016 15:21:34 +0900 [thread overview]
Message-ID: <20161103062135.10697-13-jh80.chung@samsung.com> (raw)
In-Reply-To: <20161103062135.10697-1-jh80.chung@samsung.com>
In drivers/mmc/core/host.c, there is "max-freqeuncy" property.
It should be same behavior, So Use the "max-frequency" instead of
"clock-freq-min-max".
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
---
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts | 2 +-
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 6 +++---
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 4 ++--
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
index 5797933..0acf8a2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
@@ -347,7 +347,7 @@
&sdmmc {
bus-width = <4>;
clock-frequency = <50000000>;
- clock-freq-min-max = <400000 50000000>;
+ max-frequency = <50000000>;
cap-sd-highspeed;
card-detect-delay = <200>;
keep-power-in-suspend;
diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index 0fcb214..79e7c88 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -231,7 +231,7 @@
sdmmc: dwmmc@ff0c0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0c0000 0x0 0x4000>;
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -243,7 +243,7 @@
sdio0: dwmmc@ff0d0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0d0000 0x0 0x4000>;
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>,
<&cru SCLK_SDIO0_DRV>, <&cru SCLK_SDIO0_SAMPLE>;
clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
@@ -255,7 +255,7 @@
emmc: dwmmc@ff0f0000 {
compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff0f0000 0x0 0x4000>;
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
<&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
index b65c193..b1c011d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
@@ -235,7 +235,7 @@
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe310000 0x0 0x4000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
@@ -248,7 +248,7 @@
"rockchip,rk3288-dw-mshc";
reg = <0x0 0xfe320000 0x0 0x4000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
- clock-freq-min-max = <400000 150000000>;
+ max-frequency = <150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
<&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
--
2.10.1
next prev parent reply other threads:[~2016-11-03 6:22 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-03 6:21 [PATCH 00/13] mmc: dw_mmc: cleans the codes for dwmmc controller Jaehoon Chung
2016-11-03 6:21 ` [PATCH 01/13] mmc: dw_mmc: display the real register value on debugfs Jaehoon Chung
2016-11-03 6:21 ` [PATCH 02/13] mmc: dw_mmc: fix the debug message for checking card's present Jaehoon Chung
2016-11-03 6:21 ` [PATCH 03/13] mmc: dw_mmc: change the DW_MCI_FREQ_MIN from 400K to 100K Jaehoon Chung
2016-11-03 6:21 ` [PATCH 04/13] mmc: dw_mmc: use the hold register when send stop command Jaehoon Chung
2016-11-03 6:21 ` [PATCH 05/13] mmc: dw_mmc: call the dw_mci_prep_stop_abort() by default Jaehoon Chung
2016-11-03 6:21 ` [PATCH 06/13] mmc: core: move the cookie's enum values from sdhci.h to mmc.h Jaehoon Chung
2016-11-03 6:21 ` [PATCH 07/13] mmc: dw_mmc: use the cookie's enum values for post/pre_req() Jaehoon Chung
2016-11-03 6:21 ` [PATCH 08/13] mmc: dw_mmc: remove the unnecessary mmc_data structure Jaehoon Chung
2016-11-03 6:21 ` [PATCH 09/13] mmc: dw_mmc: remove the "clock-freq-min-max" property Jaehoon Chung
2016-11-03 8:20 ` Heiko Stübner
2016-11-03 8:42 ` Jaehoon Chung
2016-11-03 6:21 ` [PATCH 10/13] ARM: dts: exynos: replace to "max-frequecy" instead of "clock-freq-min-max" Jaehoon Chung
2016-11-03 18:41 ` Krzysztof Kozlowski
2016-11-04 10:21 ` Jaehoon Chung
2016-11-04 11:19 ` Heiko Stuebner
2016-11-04 15:04 ` Krzysztof Kozlowski
2016-11-07 0:38 ` Jaehoon Chung
2016-11-09 20:10 ` Krzysztof Kozlowski
2016-11-03 6:21 ` [PATCH 11/13] ARM: dts: rockchip: replace to "max-frequency" " Jaehoon Chung
2016-11-09 14:05 ` Heiko Stuebner
2016-11-03 6:21 ` Jaehoon Chung [this message]
2016-11-09 14:37 ` [PATCH 12/13] ARM64: " Heiko Stuebner
2016-11-03 6:21 ` [PATCH 13/13] Documentation: synopsys-dw-mshc: remove the unused properties Jaehoon Chung
2016-11-10 18:47 ` Rob Herring
2016-11-09 18:55 ` [PATCH 00/13] mmc: dw_mmc: cleans the codes for dwmmc controller Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161103062135.10697-13-jh80.chung@samsung.com \
--to=jh80.chung@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawn.lin@rock-chips.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).