linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Chen-Yu Tsai <wens@csie.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-sunxi@googlegroups.com
Subject: Re: [PATCH v2 13/14] ARM: dts: sun6i: hummingbird: Enable internal audio codec
Date: Thu, 3 Nov 2016 09:45:43 +0100	[thread overview]
Message-ID: <20161103084543.m4zvwhscpaa3y5ay@lukather> (raw)
In-Reply-To: <20161103075556.29018-14-wens@csie.org>

[-- Attachment #1: Type: text/plain, Size: 1673 bytes --]

On Thu, Nov 03, 2016 at 03:55:55PM +0800, Chen-Yu Tsai wrote:
> The Hummingbird A31 has headset and line in audio jacks and an onboard
> mic routed to the pins for the SoC's internal codec. The line out pins
> are routed to an onboard speaker amp, whose output is available on a
> pin header.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> index 9a74637f677f..48c041b75aab 100644
> --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts
> @@ -69,6 +69,19 @@
>  	};
>  };
>  
> +&codec {
> +	allwinner,audio-routing =
> +		"Headphone", "HP",
> +		"Speaker", "LINEOUT",
> +		"LINEIN", "Line In",
> +		"MIC1", "Mic",
> +		"MIC2", "Headset Mic",
> +		"Mic",	"MBIAS",
> +		"Headset Mic", "HBIAS";
> +	allwinner,pa-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
> +	status = "okay";
> +};
> +
>  &cpu0 {
>  	cpu-supply = <&reg_dcdc3>;
>  };
> @@ -152,6 +165,13 @@
>  };
>  
>  &pio {
> +	codec_pa_pin: codec_pa_pin@0 {
> +		allwinner,pins = "PH22";
> +		allwinner,function = "gpio_out";
> +		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
> +		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
> +	};
> +

This pin group isn't used anywhere. Because of the strict thing in
pinctrl, I'd say it's better to not set it, but then, the pin group is
useless.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 801 bytes --]

  reply	other threads:[~2016-11-03  8:45 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-03  7:55 [PATCH v2 00/14] ASoC: sun4i-codec: Add support for A31 Codec Chen-Yu Tsai
2016-11-03  7:55 ` [PATCH v2 01/14] ASoC: sun4i-codec: Move data structures to add create_card call to quirks Chen-Yu Tsai
2016-11-03  8:23   ` Maxime Ripard
2016-11-03 17:26   ` Applied "ASoC: sun4i-codec: Move data structures to add create_card call to quirks" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 02/14] ASoC: sun4i-codec: Expand quirks to handle register offsets and card creation Chen-Yu Tsai
2016-11-03 17:34   ` Maxime Ripard
2016-11-03 20:34   ` Applied "ASoC: sun4i-codec: Expand quirks to handle register offsets and card creation" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 03/14] ASoC: sun4i-codec: Revise comments for register definition macros Chen-Yu Tsai
2016-11-03  8:24   ` Maxime Ripard
2016-11-03 20:34   ` Applied "ASoC: sun4i-codec: Revise comments for register definition macros" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 04/14] ASoC: sun4i-codec: Increase DMA max burst to 8 Chen-Yu Tsai
2016-11-03  8:26   ` Maxime Ripard
2016-11-03  8:42   ` [linux-sunxi] " Priit Laes
2016-11-03 20:33   ` Applied "ASoC: sun4i-codec: Increase DMA max burst to 8" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 05/14] ASoC: sun4i-codec: Add support for optional reset control to quirks Chen-Yu Tsai
2016-11-03  8:26   ` Maxime Ripard
2016-11-09 14:59   ` Applied "ASoC: sun4i-codec: Add support for optional reset control to quirks" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 06/14] ASoC: sun4i-codec: Add support for A31 playback through headphone output Chen-Yu Tsai
2016-11-03 17:36   ` Maxime Ripard
2016-11-04  1:08     ` Chen-Yu Tsai
2016-11-06 18:57       ` Maxime Ripard
2016-11-07  1:51         ` Chen-Yu Tsai
2016-11-03 20:33   ` Applied "ASoC: sun4i-codec: Add support for A31 playback through headphone output" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 07/14] ASoC: sun4i-codec: Add support for A31 Line In playback Chen-Yu Tsai
2016-11-03  8:29   ` Maxime Ripard
2016-11-03  7:55 ` [PATCH v2 08/14] ASoC: sun4i-codec: Add support for A31 Line Out playback Chen-Yu Tsai
2016-11-04 20:40   ` Applied "ASoC: sun4i-codec: Add support for A31 Line Out playback" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 09/14] ASoC: sun4i-codec: Add support for A31 analog microphone inputs Chen-Yu Tsai
2016-11-04 20:40   ` Applied "ASoC: sun4i-codec: Add support for A31 analog microphone inputs" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 10/14] ASoC: sun4i-codec: Add support for A31 ADC capture path Chen-Yu Tsai
2016-11-03  8:30   ` Maxime Ripard
2016-11-03  7:55 ` [PATCH v2 11/14] ASoC: sun4i-codec: Add support for A31 board level audio routing Chen-Yu Tsai
2016-11-03  8:31   ` Maxime Ripard
2016-11-04 20:39   ` Applied "ASoC: sun4i-codec: Add support for A31 board level audio routing" to the asoc tree Mark Brown
2016-11-03  7:55 ` [PATCH v2 12/14] ARM: dts: sun6i: Add audio codec device node Chen-Yu Tsai
2016-11-03  7:55 ` [PATCH v2 13/14] ARM: dts: sun6i: hummingbird: Enable internal audio codec Chen-Yu Tsai
2016-11-03  8:45   ` Maxime Ripard [this message]
2016-11-04  8:12     ` Chen-Yu Tsai
2016-11-03  7:55 ` [PATCH v2 14/14] ARM: dts: sun6i: sina31s: " Chen-Yu Tsai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161103084543.m4zvwhscpaa3y5ay@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=mark.rutland@arm.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).