From: Nadim Almas <nadim.902@gmail.com>
To: gregkh@linuxfoundation.org, bhumirks@gmail.com
Cc: devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Staging: used dma_map_single in place of pci_map_single
Date: Tue, 8 Nov 2016 02:52:08 +0530 [thread overview]
Message-ID: <20161107212208.GA5673@gmail.com> (raw)
pci_map_single is unneeded and can be replaced with dma_map_single
to avoid inconcitent api usage.
The Coccinelle semantic patch used to make this change is as follows:
@@ expression E1,E2,E3; @@
- pci_map_single(E1,
+ dma_map_single(&E1->dev,
E2, E3,
(
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRCTIONAL
|
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
|
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
|
- PCI_DMA_NONE
+ DMA_NONE_DEVICE
)
)
Signed-off-by: Nadim Almas <nadim.902@gmail.com>
---
drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c | 10 ++++++----
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 12 ++++++------
drivers/staging/slicoss/slicoss.c | 12 ++++++------
3 files changed, 18 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
index 8d6bca6..a3c8c3a 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
+++ b/drivers/staging/rtl8192e/rtl8192e/r8192E_dev.c
@@ -1184,8 +1184,9 @@ void rtl92e_fill_tx_desc(struct net_device *dev, struct tx_desc *pdesc,
struct cb_desc *cb_desc, struct sk_buff *skb)
{
struct r8192_priv *priv = rtllib_priv(dev);
- dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ dma_addr_t mapping = dma_map_single(&priv->pdev->dev, skb->data,
+ skb->len,
+ DMA_TO_DEVICE);
struct tx_fwinfo_8190pci *pTxFwInfo;
pTxFwInfo = (struct tx_fwinfo_8190pci *)skb->data;
@@ -1292,8 +1293,9 @@ void rtl92e_fill_tx_cmd_desc(struct net_device *dev, struct tx_desc_cmd *entry,
struct cb_desc *cb_desc, struct sk_buff *skb)
{
struct r8192_priv *priv = rtllib_priv(dev);
- dma_addr_t mapping = pci_map_single(priv->pdev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ dma_addr_t mapping = dma_map_single(&priv->pdev->dev, skb->data,
+ skb->len,
+ DMA_TO_DEVICE);
if (pci_dma_mapping_error(priv->pdev, mapping))
netdev_err(dev, "%s(): DMA Mapping error\n", __func__);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index f985d88..ddd6523 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1826,10 +1826,10 @@ static short _rtl92e_alloc_rx_ring(struct net_device *dev)
skb->dev = dev;
priv->rx_buf[rx_queue_idx][i] = skb;
mapping = (dma_addr_t *)skb->cb;
- *mapping = pci_map_single(priv->pdev,
+ *mapping = dma_map_single(&priv->pdev->dev,
skb_tail_pointer_rsl(skb),
priv->rxbuffersize,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
if (pci_dma_mapping_error(priv->pdev, *mapping)) {
dev_kfree_skb_any(skb);
return -1;
@@ -2104,10 +2104,10 @@ static void _rtl92e_rx_normal(struct net_device *dev)
priv->rx_buf[rx_queue_idx][priv->rx_idx[rx_queue_idx]] =
skb;
- *((dma_addr_t *) skb->cb) = pci_map_single(priv->pdev,
- skb_tail_pointer_rsl(skb),
- priv->rxbuffersize,
- PCI_DMA_FROMDEVICE);
+ *((dma_addr_t *) skb->cb) = dma_map_single(&priv->pdev->dev,
+ skb_tail_pointer_rsl(skb),
+ priv->rxbuffersize,
+ DMA_FROM_DEVICE);
if (pci_dma_mapping_error(priv->pdev,
*((dma_addr_t *)skb->cb))) {
dev_kfree_skb_any(skb);
diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c
index 062307a..2d76bfd 100644
--- a/drivers/staging/slicoss/slicoss.c
+++ b/drivers/staging/slicoss/slicoss.c
@@ -1452,10 +1452,10 @@ static int slic_rcvqueue_fill(struct adapter *adapter)
skb = alloc_skb(SLIC_RCVQ_RCVBUFSIZE, GFP_ATOMIC);
if (skb) {
paddr = (void *)(unsigned long)
- pci_map_single(adapter->pcidev,
+ dma_map_single(&adapter->pcidev->dev,
skb->data,
SLIC_RCVQ_RCVBUFSIZE,
- PCI_DMA_FROMDEVICE);
+ DMA_FROM_DEVICE);
paddrl = SLIC_GET_ADDR_LOW(paddr);
paddrh = SLIC_GET_ADDR_HIGH(paddr);
@@ -1608,8 +1608,8 @@ static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
struct device *dev;
paddr = (void *)(unsigned long)
- pci_map_single(adapter->pcidev, skb->head,
- SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
+ dma_map_single(&adapter->pcidev->dev, skb->head,
+ SLIC_RCVQ_RCVBUFSIZE, DMA_FROM_DEVICE);
rcvbuf->status = 0;
skb->next = NULL;
@@ -1774,8 +1774,8 @@ static void slic_xmit_build_request(struct adapter *adapter,
ihcmd->flags = adapter->port << IHFLG_IFSHFT;
ihcmd->command = IHCMD_XMT_REQ;
ihcmd->u.slic_buffers.totlen = skb->len;
- phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
- PCI_DMA_TODEVICE);
+ phys_addr = dma_map_single(&adapter->pcidev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
if (pci_dma_mapping_error(adapter->pcidev, phys_addr)) {
kfree_skb(skb);
dev_err(&adapter->pcidev->dev, "DMA mapping error\n");
--
2.7.4
next reply other threads:[~2016-11-07 22:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-07 21:22 Nadim Almas [this message]
2016-11-10 12:55 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161107212208.GA5673@gmail.com \
--to=nadim.902@gmail.com \
--cc=bhumirks@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--subject='Re: [PATCH] Staging: used dma_map_single in place of pci_map_single' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).