From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752512AbcKSGDb (ORCPT ); Sat, 19 Nov 2016 01:03:31 -0500 Received: from lelnx194.ext.ti.com ([198.47.27.80]:20003 "EHLO lelnx194.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751011AbcKSGDa (ORCPT ); Sat, 19 Nov 2016 01:03:30 -0500 From: Peter Ujfalusi To: , , , CC: , , , Subject: [PATCH v2 0/2] dmaengine: core/omap-dma: Support for port window Date: Thu, 17 Nov 2016 14:50:15 +0200 Message-ID: <20161117125017.14954-1-peter.ujfalusi@ti.com> X-Mailer: git-send-email 2.10.2 MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hi, Changes since v1: - Make sure that the one frame covers the port_window (burst = port_window) - added comment to explain the double indexed setup to cover the port_window - Simplifications for the code mentioned by Russell and Vinod Cover letter from v1: as I'm trying to convert the remaining OMAP driver to use DMAengine instead of the legacy omap-dma API I have encountered with the drivers/usb/musb/tusb6010_omap.c driver. The TUSB6010 is connected via NOR FLASH interface and it's register space is mapped in the GPMC memory area. In OMAP SoCs we have support for external DMA request lines and the TUSB6010 is using those as well. With asynchronous access the DMA needs to read/write within the FIFO 'window' in incremental address mode to read/write data. The constant addressing only works in synchronous mode. Since the DMA is driven by external DMA requests, the asynchronous mode is also slave DMA operation, but currently the port window can not be 'swiped' as the DMAengine only supports single register/address on the slave side. This series will add support in dma_slave_config to specify the port side window size and the second patch implements the setup needs in omap-dma driver for such a transfer. Regards, Peter --- Peter Ujfalusi (2): dmaengine: dma_slave_config: add support for slave port window dmaengine: omap-dma: Support for slave devices with data port window drivers/dma/omap-dma.c | 61 +++++++++++++++++++++++++++++++++++++++++++++-- include/linux/dmaengine.h | 8 +++++++ 2 files changed, 67 insertions(+), 2 deletions(-) -- 2.10.2