From: Milo Kim <woogyom.kim@gmail.com>
To: Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Milo Kim <woogyom.kim@gmail.com>
Subject: [PATCH v3 0/3] ARM: dts: imx6: Support Poslab Savageboard dual & quad
Date: Fri, 9 Dec 2016 10:04:33 +0900 [thread overview]
Message-ID: <20161209010436.7994-1-woogyom.kim@gmail.com> (raw)
Poslab Savageboard is i.MX6 SoC base, but BSP code from the vendor is
not mainline u-boot and kernel. Personal reason of using this board is
testing etnaviv user-space driver, so I re-write device tree files based on
mainline kernel for the first step.
This patchset includes common DT file, dual and quad board files.
Supported components are
- Display: HDMI and LVDS panel
- eMMC and SD card
- Ethernet
- Pinmux configuration
- SATA: only for Savageboard quad
- UART1 for debug console
- USB host
Missing features are
- Audio (WM8903)
- USB OTG
- PMIC WM8326: default settings are used so no issue to bring-up the system
- MIPI DSI, CSI
Patches are tested on the Savageboard quad but the dual version should work
because the only difference between dual and quad is SATA support.
More information in http://www.savageboard.org
v3:
Specify the dtbs for i.MX6 build.
v2:
Fix DT node for regulator, phy-reset-gpios and iomuxc node.
Milo Kim (3):
ARM: dts: imx6: Add Savageboard common file
ARM: dts: imx6: Support Savageboard dual
ARM: dts: imx6: Support Savageboard quad
arch/arm/boot/dts/Makefile | 2 +
arch/arm/boot/dts/imx6dl-savageboard.dts | 50 ++++++
arch/arm/boot/dts/imx6q-savageboard.dts | 54 ++++++
arch/arm/boot/dts/imx6qdl-savageboard.dtsi | 262 +++++++++++++++++++++++++++++
4 files changed, 368 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6dl-savageboard.dts
create mode 100644 arch/arm/boot/dts/imx6q-savageboard.dts
create mode 100644 arch/arm/boot/dts/imx6qdl-savageboard.dtsi
--
2.9.3
next reply other threads:[~2016-12-09 1:05 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 1:04 Milo Kim [this message]
2016-12-09 1:04 ` [PATCH v3 1/3] ARM: dts: imx6: Add Savageboard common file Milo Kim
2016-12-26 16:26 ` Fabio Estevam
2017-01-02 6:52 ` Shawn Guo
2017-01-02 7:31 ` Milo Kim
2017-01-02 7:41 ` Shawn Guo
2017-01-02 7:45 ` Milo Kim
2017-01-02 7:44 ` Shawn Guo
2017-01-02 7:49 ` Milo Kim
2016-12-09 1:04 ` [PATCH v3 2/3] ARM: dts: imx6: Support Savageboard dual Milo Kim
2016-12-26 16:27 ` Fabio Estevam
2017-01-02 7:03 ` Shawn Guo
2017-01-02 7:32 ` Milo Kim
2016-12-09 1:04 ` [PATCH v3 3/3] ARM: dts: imx6: Support Savageboard quad Milo Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161209010436.7994-1-woogyom.kim@gmail.com \
--to=woogyom.kim@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).